# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
-# http://www.apache.org/licenses/LICENSE-2.0
+# https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
case node[:cpu][:"0"][:vendor_id]
when "GenuineIntel"
package "intel-microcode"
-end
-
-case node[:cpu][:"0"][:vendor_id]
when "AuthenticAMD"
- if node[:lsb][:release].to_f >= 14.04
- package "amd64-microcode"
- end
+ package "amd64-microcode"
end
if node[:dmi] && node[:dmi][:system]
product = "Unknown"
end
+units = []
+
+if node[:roles].include?("bytemark") || node[:roles].include?("exonetric")
+ units << "0"
+end
+
case manufacturer
when "HP"
package "hponcfg"
- package "hp-health"
- unit = "1"
- speed = "115200"
-when "TYAN"
- unit = "0"
- speed = "115200"
-when "TYAN Computer Corporation"
- unit = "0"
- speed = "115200"
-when "Supermicro"
- case product
- when "H8DGU", "X9SCD", "X7DBU", "X7DW3", "X9DR7/E-(J)LN4F", "X9DR3-F", "X9DRW"
- unit = "1"
- speed = "115200"
- else
- unit = "0"
- speed = "115200"
- end
-when "IBM"
- unit = "0"
- speed = "115200"
-end
-
-if manufacturer == "HP" && node[:lsb][:release].to_f > 11.10
- include_recipe "git"
- git "/opt/hp/hp-legacy" do
- action :sync
- repository "git://chef.openstreetmap.org/hp-legacy.git"
- user "root"
- group "root"
- ignore_failure true
+ package "hp-health" do
+ action :install
+ notifies :restart, "service[hp-health]"
end
- link "/opt/hp/hp-health/bin/hpasmd" do
- to "/opt/hp/hp-legacy/hpasmd"
+ service "hp-health" do
+ action [:enable, :start]
+ supports :status => true, :restart => true
end
- link "/usr/lib/libhpasmintrfc.so.3.0" do
- to "/opt/hp/hp-legacy/libhpasmintrfc.so.3.0"
- end
+ if product.end_with?("Gen8", "Gen9")
+ package "hp-ams" do
+ action :install
+ notifies :restart, "service[hp-ams]"
+ end
- link "/usr/lib/libhpasmintrfc.so.3" do
- to "libhpasmintrfc.so.3.0"
+ service "hp-ams" do
+ action [:enable, :start]
+ supports :status => true, :restart => true
+ end
end
- link "/usr/lib/libhpasmintrfc.so" do
- to "libhpasmintrfc.so.3.0"
+ units << "1"
+when "TYAN"
+ units << "0"
+when "TYAN Computer Corporation"
+ units << "0"
+when "Supermicro"
+ case product
+ when "H8DGU", "X9SCD", "X7DBU", "X7DW3", "X9DR7/E-(J)LN4F", "X9DR3-F", "X9DRW", "SYS-1028U-TN10RT+", "SYS-2028U-TN24R4T+", "Super Server"
+ units << "1"
+ else
+ units << "0"
end
+when "IBM"
+ units << "0"
end
-unless unit.nil?
- file "/etc/init/ttySttyS#{unit}.conf" do
- action :delete
- end
-
- template "/etc/init/ttyS#{unit}.conf" do
- source "tty.conf.erb"
- owner "root"
- group "root"
- mode 0644
- variables :unit => unit, :speed => speed
- end
-
- service "ttyS#{unit}" do
- provider Chef::Provider::Service::Upstart
+units.sort.uniq.each do |unit|
+ service "serial-getty@ttyS#{unit}" do
action [:enable, :start]
- supports :status => true, :restart => true, :reload => false
- subscribes :restart, "template[/etc/init/ttyS#{unit}.conf]"
end
end
source "grub.erb"
owner "root"
group "root"
- mode 0644
- variables :unit => unit, :speed => speed, :entry => grub_entry
+ mode 0o644
+ variables :units => units, :entry => grub_entry
notifies :run, "execute[update-grub]"
end
end
source "initramfs-mdadm.erb"
owner "root"
group "root"
- mode 0644
+ mode 0o644
notifies :run, "execute[update-initramfs]"
end
action [:enable, :start]
end
-if node[:kernel][:modules].include?("ipmi_si")
- package "ipmitool"
-end
+package "ipmitool" if node[:kernel][:modules].include?("ipmi_si")
-if node[:lsb][:release].to_f >= 12.10
- package "irqbalance"
+package "irqbalance"
- template "/etc/default/irqbalance" do
- source "irqbalance.erb"
- owner "root"
- group "root"
- mode 0644
- end
+template "/etc/default/irqbalance" do
+ source "irqbalance.erb"
+ owner "root"
+ group "root"
+ mode 0o644
+end
- service "irqbalance" do
- action [:start, :enable]
- supports :status => false, :restart => true, :reload => false
- subscribes :restart, "template[/etc/default/irqbalance]"
- end
+service "irqbalance" do
+ action [:start, :enable]
+ supports :status => false, :restart => true, :reload => false
+ subscribes :restart, "template[/etc/default/irqbalance]"
+end
+
+# Link Layer Discovery Protocol Daemon
+package "lldpd"
+service "lldpd" do
+ action [:start, :enable]
+ supports :status => true, :restart => true, :reload => true
end
tools_packages = []
node[:kernel][:modules].each_key do |modname|
case modname
when "cciss"
- tools_packages << "hpssacli"
+ tools_packages << "ssacli"
status_packages["cciss-vol-status"] ||= []
when "hpsa"
- tools_packages << "hpssacli"
+ tools_packages << "ssacli"
status_packages["cciss-vol-status"] ||= []
when "mptsas"
tools_packages << "lsiutil"
- # status_packages["mpt-status"] ||= []
+ status_packages["mpt-status"] ||= []
when "mpt2sas", "mpt3sas"
tools_packages << "sas2ircu"
status_packages["sas2ircu-status"] ||= []
end
end
-%w(hpssacli lsiutil sas2ircu megactl megacli arcconf).each do |tools_package|
+%w[ssacli lsiutil sas2ircu megactl megacli arcconf].each do |tools_package|
if tools_packages.include?(tools_package)
package tools_package
else
git "/opt/areca" do
action :sync
- repository "git://chef.openstreetmap.org/areca.git"
+ repository "https://git.openstreetmap.org/private/areca.git"
user "root"
group "root"
end
source "raid.default.erb"
owner "root"
group "root"
- mode 0644
+ mode 0o644
variables :devices => status_packages[status_package]
end
end
end
-disks = node[:hardware][:disk][:disks].map do |disk|
- next if disk[:state] == "spun_down"
+disks = if node[:hardware][:disk]
+ node[:hardware][:disk][:disks]
+ else
+ []
+ end
+
+intel_ssds = disks.select { |d| d[:vendor] == "INTEL" && d[:model] =~ /^SSD/ }
+
+nvmes = if node[:hardware][:pci]
+ node[:hardware][:pci].values.select { |pci| pci[:driver] == "nvme" }
+ else
+ []
+ end
+
+intel_nvmes = nvmes.select { |pci| pci[:vendor_name] == "Intel Corporation" }
+
+if !intel_ssds.empty? || !intel_nvmes.empty?
+ package "unzip"
+
+ remote_file "#{Chef::Config[:file_cache_path]}/Intel_SSD_Data_Center_Tool_3.0.13_Linux.zip" do
+ source "https://downloadmirror.intel.com/28460/eng/Intel_SSD_Data_Center_Tool_3.0.17_Linux.zip"
+ end
+
+ execute "#{Chef::Config[:file_cache_path]}/Intel_SSD_Data_Center_Tool_3.0.13_Linux.zip" do
+ command "unzip Intel_SSD_Data_Center_Tool_3.0.13_Linux.zip isdct_3.0.13.400-17_amd64.deb"
+ cwd Chef::Config[:file_cache_path]
+ user "root"
+ group "root"
+ not_if { File.exist?("#{Chef::Config[:file_cache_path]}/isdct_3.0.13.400-17_amd64.deb") }
+ end
+
+ dpkg_package "isdct" do
+ version "3.0.13.400-17"
+ source "#{Chef::Config[:file_cache_path]}/isdct_3.0.13.400-17_amd64.deb"
+ end
+end
+
+disks = disks.map do |disk|
+ next if disk[:state] == "spun_down" || %w[unconfigured failed].any?(disk[:status])
if disk[:smart_device]
controller = node[:hardware][:disk][:controllers][disk[:controller]]
- device = controller[:device].sub("/dev/", "")
- smart = disk[:smart_device]
-
- if device.start_with?("cciss/") && smart =~ /^cciss,(\d+)$/
- array = node[:hardware][:disk][:arrays][disk[:arrays].first]
- munin = "cciss-3#{array[:wwn]}-#{Regexp.last_match(1)}"
- elsif smart =~ /^.*,(\d+)$/
- munin = "#{device}-#{Regexp.last_match(1)}"
- elsif smart =~ %r{^.*,(\d+)/(\d+)$}
- munin = "#{device}-#{Regexp.last_match(1)}:#{Regexp.last_match(2)}"
+
+ if controller && controller[:device]
+ device = controller[:device].sub("/dev/", "")
+ smart = disk[:smart_device]
+
+ if device.start_with?("cciss/") && smart =~ /^cciss,(\d+)$/
+ array = node[:hardware][:disk][:arrays][disk[:arrays].first]
+ munin = "cciss-3#{array[:wwn]}-#{Regexp.last_match(1)}"
+ elsif smart =~ /^.*,(\d+)$/
+ munin = "#{device}-#{Regexp.last_match(1)}"
+ elsif smart =~ %r{^.*,(\d+)/(\d+)$}
+ munin = "#{device}-#{Regexp.last_match(1)}:#{Regexp.last_match(2)}"
+ end
end
elsif disk[:device]
device = disk[:device].sub("/dev/", "")
disks = disks.compact
-if disks.count > 0
+if disks.count.positive?
package "smartmontools"
template "/usr/local/bin/smartd-mailer" do
source "smartd-mailer.erb"
owner "root"
group "root"
- mode 0755
+ mode 0o755
end
template "/etc/smartd.conf" do
source "smartd.conf.erb"
owner "root"
group "root"
- mode 0644
+ mode 0o644
variables :disks => disks
- notifies :reload, "service[smartmontools]"
end
template "/etc/default/smartmontools" do
source "smartmontools.erb"
owner "root"
group "root"
- mode 0644
- notifies :restart, "service[smartmontools]"
+ mode 0o644
end
- service "smartmontools" do
+ service "smartd" do
action [:enable, :start]
- supports :status => true, :restart => true, :reload => true
+ subscribes :reload, "template[/etc/smartd.conf]"
+ subscribes :restart, "template[/etc/default/smartmontools]"
end
# Don't try and do munin monitoring of disks behind
# an Areca controller as they only allow one thing to
# talk to the controller at a time and smartd will
# throw errors if it clashes with munin
- disks = disks.reject { |disk| disk[:smart] && disk[:smart].start_with?("areca,") }
+ disks = disks.reject { |disk| disk[:smart]&.start_with?("areca,") }
disks.each do |disk|
munin_plugin "smart_#{disk[:munin]}" do
end
end
else
- service "smartmontools" do
+ service "smartd" do
action [:stop, :disable]
end
end
-if disks.count > 0
+if disks.count.positive?
munin_plugin "hddtemp_smartctl" do
conf "munin.hddtemp.erb"
conf_variables :disks => disks
plugins.each do |plugin|
munin_plugin plugin do
action :delete
+ conf "munin.smart.erb"
end
end
file "/etc/mdadm/mdadm.conf" do
owner "root"
group "root"
- mode 0644
+ mode 0o644
content mdadm_conf
end
source "modules.erb"
owner "root"
group "root"
- mode 0644
+ mode 0o644
end
-if node[:lsb][:release].to_f <= 12.10
- service "module-init-tools" do
- provider Chef::Provider::Service::Upstart
- action :nothing
- subscribes :start, "template[/etc/modules]"
- end
-else
- service "kmod" do
- provider Chef::Provider::Service::Upstart
- action :nothing
- subscribes :start, "template[/etc/modules]"
- end
+service "kmod" do
+ action :nothing
+ subscribes :start, "template[/etc/modules]"
end
if node[:hardware][:watchdog]
source "watchdog.erb"
owner "root"
group "root"
- mode 0644
+ mode 0o644
variables :module => node[:hardware][:watchdog]
end
cpu = File.basename(coretemp).sub("coretemp.", "").to_i
chip = format("coretemp-isa-%04d", cpu)
- if File.exist?("#{coretemp}/name")
- temps = Dir.glob("#{coretemp}/temp*_input").map do |temp|
- File.basename(temp).sub("temp", "").sub("_input", "").to_i
- end.sort
- else
- temps = Dir.glob("#{coretemp}/hwmon/hwmon*/temp*_input").map do |temp|
- File.basename(temp).sub("temp", "").sub("_input", "").to_i
- end.sort
- end
+ temps = if File.exist?("#{coretemp}/name")
+ Dir.glob("#{coretemp}/temp*_input").map do |temp|
+ File.basename(temp).sub("temp", "").sub("_input", "").to_i
+ end.sort
+ else
+ Dir.glob("#{coretemp}/hwmon/hwmon*/temp*_input").map do |temp|
+ File.basename(temp).sub("temp", "").sub("_input", "").to_i
+ end.sort
+ end
if temps.first == 1
node.default[:hardware][:sensors][chip][:temps][:temp1][:label] = "CPU #{cpu}"
source "sensors.conf.erb"
owner "root"
group "root"
- mode 0644
+ mode 0o644
notifies :run, "execute[/etc/sensors.d/chef.conf]"
end
end
projects / chef.git / blobdiff