--DEBUG: RAISE WARNING 'get_country_code, start: %', ST_AsText(place_centre);
+ -- Try for a OSM polygon
+ FOR nearcountry IN select country_code from location_area_country where country_code is not null and not isguess and st_covers(geometry, place_centre) limit 1
+ LOOP
+ RETURN nearcountry.country_code;
+ END LOOP;
+
--DEBUG: RAISE WARNING 'osm fallback: %', ST_AsText(place_centre);
-- Try for OSM fallback data
RETURN nearcountry.country_code;
END LOOP;
- -- Try for a OSM polygon
- FOR nearcountry IN select country_code from location_area_country where country_code is not null and not isguess and st_covers(geometry, place_centre) limit 1
- LOOP
- RETURN nearcountry.country_code;
- END LOOP;
-
--DEBUG: RAISE WARNING 'natural earth: %', ST_AsText(place_centre);
-- Natural earth data
FOR nodeidpos in 1..array_upper(waynodes, 1) LOOP
- select min(place_id) from placex where osm_type = 'N' and osm_id = waynodes[nodeidpos]::BIGINT and type = 'house' INTO search_place_id;
+ -- If there is a place of a type other than place/house, use that because
+ -- it is guaranteed to be the original node. For place/house types use the
+ -- one with the smallest id because the original node was created first.
+ -- Ignore all nodes marked for deletion. (Might happen when the type changes.)
+ select place_id from placex where osm_type = 'N' and osm_id = waynodes[nodeidpos]::BIGINT and indexed_status < 100 order by (type = 'house'),place_id limit 1 INTO search_place_id;
IF search_place_id IS NULL THEN
- -- null record of right type
+ -- if no such node exists, create a record of the right type
select * from placex where osm_type = 'N' and osm_id = waynodes[nodeidpos]::BIGINT and type = 'house' limit 1 INTO nextnode;
select ST_SetSRID(ST_Point(lon::float/10000000,lat::float/10000000),4326) from planet_osm_nodes where id = waynodes[nodeidpos] INTO nextnode.geometry;
IF nextnode.geometry IS NULL THEN
FOR housenum IN startnumber..endnumber BY stepsize LOOP
-- this should really copy postcodes but it puts a huge burdon on the system for no big benefit
-- ideally postcodes should move up to the way
- insert into placex (osm_type, osm_id, class, type, admin_level, housenumber, street, isin, postcode,
+ insert into placex (osm_type, osm_id, class, type, admin_level, housenumber, street, addr_place, isin, postcode,
country_code, parent_place_id, rank_address, rank_search, indexed_status, geometry)
- values ('N',prevnode.osm_id, prevnode.class, prevnode.type, prevnode.admin_level, housenum, prevnode.street, prevnode.isin, coalesce(prevnode.postcode, defpostalcode),
+ values ('N',prevnode.osm_id, 'place', 'house', prevnode.admin_level, housenum, prevnode.street, prevnode.addr_place, prevnode.isin, coalesce(prevnode.postcode, defpostalcode),
prevnode.country_code, prevnode.parent_place_id, prevnode.rank_address, prevnode.rank_search, 1, ST_Line_Interpolate_Point(linegeo, (housenum::float-orginalstartnumber::float)/originalnumberrange::float));
newpoints := newpoints + 1;
--RAISE WARNING 'interpolation number % % ',prevnode.place_id,housenum;
ELSEIF NEW.type in ('national_park') THEN
NEW.rank_search := 18;
NEW.rank_address := 18;
- ELSEIF NEW.type in ('suburb','croft','subdivision') THEN
+ ELSEIF NEW.type in ('suburb','croft','subdivision','isolated_dwelling') THEN
NEW.rank_search := 20;
NEW.rank_address := NEW.rank_search;
- ELSEIF NEW.type in ('farm','locality','islet','isolated_dwelling','mountain_pass') THEN
+ ELSEIF NEW.type in ('farm','locality','islet','mountain_pass') THEN
NEW.rank_search := 20;
NEW.rank_address := 0;
-- Irish townlands, tagged as place=locality and locality=townland
-- work around bug in postgis, this may have been fixed in 2.0.0 (see http://trac.osgeo.org/postgis/ticket/547)
update placex set indexed_status = 2 where (st_covers(NEW.geometry, placex.geometry) OR ST_Intersects(NEW.geometry, placex.geometry))
- AND rank_search > NEW.rank_search and indexed_status = 0 and ST_geometrytype(placex.geometry) = 'ST_Point' and (rank_search < 28 or name is not null);
+ AND rank_search > NEW.rank_search and indexed_status = 0 and ST_geometrytype(placex.geometry) = 'ST_Point' and (rank_search < 28 or name is not null or (NEW.rank_search >= 16 and addr_place is not null));
update placex set indexed_status = 2 where (st_covers(NEW.geometry, placex.geometry) OR ST_Intersects(NEW.geometry, placex.geometry))
- AND rank_search > NEW.rank_search and indexed_status = 0 and ST_geometrytype(placex.geometry) != 'ST_Point' and (rank_search < 28 or name is not null);
+ AND rank_search > NEW.rank_search and indexed_status = 0 and ST_geometrytype(placex.geometry) != 'ST_Point' and (rank_search < 28 or name is not null or (NEW.rank_search >= 16 and addr_place is not null));
END IF;
ELSE
-- mark nearby items for re-indexing, where 'nearby' depends on the features rank_search and is a complete guess :(
IF NEW.rank_search >= 26 THEN
-- roads may cause reparenting for >27 rank places
update placex set indexed_status = 2 where indexed_status = 0 and rank_search > NEW.rank_search and ST_DWithin(placex.geometry, NEW.geometry, diameter);
+ ELSEIF NEW.rank_search >= 16 THEN
+ -- up to rank 16, street-less addresses may need reparenting
+ update placex set indexed_status = 2 where indexed_status = 0 and rank_search > NEW.rank_search and ST_DWithin(placex.geometry, NEW.geometry, diameter) and (rank_search < 28 or name is not null or addr_place is not null);
ELSE
-- for all other places the search terms may change as well
update placex set indexed_status = 2 where indexed_status = 0 and rank_search > NEW.rank_search and ST_DWithin(placex.geometry, NEW.geometry, diameter) and (rank_search < 28 or name is not null);
NEW.centroid := null;
-- reclaculate country and partition
- IF NEW.rank_search >= 4 THEN
- --NEW.calculated_country_code := lower(get_country_code(NEW.geometry, NEW.country_code));
- NEW.calculated_country_code := lower(get_country_code(place_centroid));
+ IF NEW.rank_search = 4 THEN
+ -- for countries, believe the mapped country code,
+ -- so that we remain in the right partition if the boundaries
+ -- suddenly expand.
+ NEW.partition := get_partition(place_centroid, lower(NEW.country_code));
+ IF NEW.partition = 0 THEN
+ NEW.calculated_country_code := lower(get_country_code(place_centroid));
+ NEW.partition := get_partition(place_centroid, NEW.calculated_country_code);
+ ELSE
+ NEW.calculated_country_code := lower(NEW.country_code);
+ END IF;
ELSE
- NEW.calculated_country_code := NULL;
+ IF NEW.rank_search > 4 THEN
+ --NEW.calculated_country_code := lower(get_country_code(NEW.geometry, NEW.country_code));
+ NEW.calculated_country_code := lower(get_country_code(place_centroid));
+ ELSE
+ NEW.calculated_country_code := NULL;
+ END IF;
+ NEW.partition := get_partition(place_centroid, NEW.calculated_country_code);
END IF;
- NEW.partition := get_partition(place_centroid, NEW.calculated_country_code);
NEW.geometry_sector := geometry_sector(NEW.partition, place_centroid);
-- Adding ourselves to the list simplifies address calculations later
END IF;
-- If the way contains an explicit name of a street copy it
- IF NEW.street IS NULL AND location.street IS NOT NULL THEN
+ IF NEW.street IS NULL AND NEW.addr_place IS NULL AND location.street IS NOT NULL THEN
--RAISE WARNING 'node in way that has a streetname %',location;
NEW.street := location.street;
END IF;
+ -- IF the way contains an explicit name of a place copy it
+ IF NEW.addr_place IS NULL AND NEW.street IS NULL AND location.addr_place IS NOT NULL THEN
+ NEW.addr_place := location.addr_place;
+ END IF;
+
-- If this way is a street interpolation line then it is probably as good as we are going to get
- IF NEW.parent_place_id IS NULL AND NEW.street IS NULL AND location.class = 'place' and location.type='houses' THEN
+ IF NEW.parent_place_id IS NULL AND NEW.street IS NULL AND NEW.addr_place IS NULL AND location.class = 'place' and location.type='houses' THEN
-- Try and find a way that is close roughly parellel to this line
FOR relation IN SELECT place_id FROM placex
WHERE ST_DWithin(location.geometry, placex.geometry, 0.001) and placex.rank_search = 26
--RAISE WARNING 'x3 %',NEW.parent_place_id;
IF NEW.parent_place_id IS NULL AND NEW.street IS NOT NULL THEN
- address_street_word_id := get_name_id(make_standard_name(NEW.street));
+ address_street_word_id := get_name_id(make_standard_name(NEW.street));
IF address_street_word_id IS NOT NULL THEN
FOR location IN SELECT * from getNearestNamedRoadFeature(NEW.partition, place_centroid, address_street_word_id) LOOP
+ NEW.parent_place_id := location.place_id;
+ END LOOP;
+ END IF;
+ END IF;
+
+ IF NEW.parent_place_id IS NULL AND NEW.addr_place IS NOT NULL THEN
+ address_street_word_id := get_name_id(make_standard_name(NEW.addr_place));
+ IF address_street_word_id IS NOT NULL THEN
+ FOR location IN SELECT * from getNearestNamedPlaceFeature(NEW.partition, place_centroid, address_street_word_id) LOOP
NEW.parent_place_id := location.place_id;
END LOOP;
END IF;
END IF;
END IF;
+ END IF;
+
+ -- Name searches can be done for ways as well as relations
+ IF NEW.osm_type in ('W','R') AND NEW.rank_search < 26 THEN
+
-- not found one yet? how about doing a name search
IF NEW.centroid IS NULL AND (NEW.name->'name') is not null and make_standard_name(NEW.name->'name') != '' THEN
-- No - process it as a new insertion (hopefully of low rank or it will be slow)
insert into placex (osm_type, osm_id, class, type, name, admin_level, housenumber,
- street, isin, postcode, country_code, extratags, geometry)
+ street, addr_place, isin, postcode, country_code, extratags, geometry)
values (NEW.osm_type
,NEW.osm_id
,NEW.class
,NEW.admin_level
,NEW.housenumber
,NEW.street
+ ,NEW.addr_place
,NEW.isin
,NEW.postcode
,NEW.country_code
IF coalesce(existing.street, '') != coalesce(NEW.street, '') THEN
RAISE WARNING 'update details, street: % % % %',NEW.osm_type,NEW.osm_id,existing.street,NEW.street;
END IF;
+ IF coalesce(existing.addr_place, '') != coalesce(NEW.addr_place, '') THEN
+ RAISE WARNING 'update details, street: % % % %',NEW.osm_type,NEW.osm_id,existing.addr_place,NEW.addr_place;
+ END IF;
IF coalesce(existing.isin, '') != coalesce(NEW.isin, '') THEN
RAISE WARNING 'update details, isin: % % % %',NEW.osm_type,NEW.osm_id,existing.isin,NEW.isin;
END IF;
IF FALSE AND existingplacex.rank_search < 26
AND coalesce(existing.housenumber, '') = coalesce(NEW.housenumber, '')
AND coalesce(existing.street, '') = coalesce(NEW.street, '')
+ AND coalesce(existing.addr_place, '') = coalesce(NEW.addr_place, '')
AND coalesce(existing.isin, '') = coalesce(NEW.isin, '')
AND coalesce(existing.postcode, '') = coalesce(NEW.postcode, '')
AND coalesce(existing.country_code, '') = coalesce(NEW.country_code, '')
IF coalesce(existing.name::text, '') != coalesce(NEW.name::text, '')
OR coalesce(existing.housenumber, '') != coalesce(NEW.housenumber, '')
OR coalesce(existing.street, '') != coalesce(NEW.street, '')
+ OR coalesce(existing.addr_place, '') != coalesce(NEW.addr_place, '')
OR coalesce(existing.isin, '') != coalesce(NEW.isin, '')
OR coalesce(existing.postcode, '') != coalesce(NEW.postcode, '')
OR coalesce(existing.country_code, '') != coalesce(NEW.country_code, '') THEN
OR coalesce(existing.extratags::text, '') != coalesce(NEW.extratags::text, '')
OR coalesce(existing.housenumber, '') != coalesce(NEW.housenumber, '')
OR coalesce(existing.street, '') != coalesce(NEW.street, '')
+ OR coalesce(existing.addr_place, '') != coalesce(NEW.addr_place, '')
OR coalesce(existing.isin, '') != coalesce(NEW.isin, '')
OR coalesce(existing.postcode, '') != coalesce(NEW.postcode, '')
OR coalesce(existing.country_code, '') != coalesce(NEW.country_code, '')
name = NEW.name,
housenumber = NEW.housenumber,
street = NEW.street,
+ addr_place = NEW.addr_place,
isin = NEW.isin,
postcode = NEW.postcode,
country_code = NEW.country_code,
extratags = NEW.extratags,
+ admin_level = NEW.admin_level,
geometry = NEW.geometry
where osm_type = NEW.osm_type and osm_id = NEW.osm_id and class = NEW.class and type = NEW.type;
name = NEW.name,
housenumber = NEW.housenumber,
street = NEW.street,
+ addr_place = NEW.addr_place,
isin = NEW.isin,
postcode = NEW.postcode,
country_code = NEW.country_code,
parent_place_id = null,
extratags = NEW.extratags,
+ admin_level = NEW.admin_level,
indexed_status = 2,
geometry = NEW.geometry
where place_id = existingplacex.place_id;
name = place.name,
housenumber = place.housenumber,
street = place.street,
+ addr_place = place.addr_place,
isin = place.isin,
postcode = place.postcode,
country_code = place.country_code,
IF ST_GeometryType(placegeom) in ('ST_Polygon','ST_MultiPolygon') THEN
FOR geom IN select split_geometry(placegeom) FROM placex WHERE place_id = placeid LOOP
update placex set indexed_status = 2 where (st_covers(geom, placex.geometry) OR ST_Intersects(geom, placex.geometry))
- AND rank_search > rank and indexed_status = 0 and ST_geometrytype(placex.geometry) = 'ST_Point' and (rank_search < 28 or name is not null);
+ AND rank_search > rank and indexed_status = 0 and ST_geometrytype(placex.geometry) = 'ST_Point' and (rank_search < 28 or name is not null or (rank >= 16 and addr_place is not null));
update placex set indexed_status = 2 where (st_covers(geom, placex.geometry) OR ST_Intersects(geom, placex.geometry))
- AND rank_search > rank and indexed_status = 0 and ST_geometrytype(placex.geometry) != 'ST_Point' and (rank_search < 28 or name is not null);
+ AND rank_search > rank and indexed_status = 0 and ST_geometrytype(placex.geometry) != 'ST_Point' and (rank_search < 28 or name is not null or (rank >= 16 and addr_place is not null));
END LOOP;
ELSE
diameter := 0;
diameter := 0.001; -- 50 to 100 meters
END IF;
IF diameter > 0 THEN
- update placex set indexed_status = 2 where indexed_status = 0 and rank_search > rank and ST_DWithin(placex.geometry, placegeom, diameter) and (rank_search < 28 or name is not null);
+ IF rank >= 26 THEN
+ -- roads may cause reparenting for >27 rank places
+ update placex set indexed_status = 2 where indexed_status = 0 and rank_search > rank and ST_DWithin(placex.geometry, placegeom, diameter);
+ ELSEIF rank >= 16 THEN
+ -- up to rank 16, street-less addresses may need reparenting
+ update placex set indexed_status = 2 where indexed_status = 0 and rank_search > rank and ST_DWithin(placex.geometry, placegeom, diameter) and (rank_search < 28 or name is not null or addr_place is not null);
+ ELSE
+ -- for all other places the search terms may change as well
+ update placex set indexed_status = 2 where indexed_status = 0 and rank_search > rank and ST_DWithin(placex.geometry, placegeom, diameter) and (rank_search < 28 or name is not null);
+ END IF;
END IF;
END IF;
RETURN TRUE;
projects / nominatim.git / blobdiff