enable CI tests for Ubuntu 24

[nominatim.git] / docs / develop / Development-Environment.md

diff --git a/docs/develop/Development-Environment.md b/docs/develop/Development-Environment.md
index 0334d0f1006e4e1c36efcc301dc075d8bbbde0ad..20d024114107f97448acc8b2445056fcc1f0356f 100644 (file)
--- a/docs/develop/Development-Environment.md
+++ b/docs/develop/Development-Environment.md
@@ -1,22 +1,22 @@
 # Setting up Nominatim for Development
 
 # Setting up Nominatim for Development
 

-This chapter gives an overview how to set up Nominatim for developement
+This chapter gives an overview how to set up Nominatim for development

 and how to run tests.
 
 and how to run tests.
 

-!!!Important
-This guide assumes that you develop under the latest version of Ubuntu. You
-can of course also use your favourite distribution. You just might have to
-adapt the commands below slightly, in particular the commands for installing
-additional software.
+!!! Important
+    This guide assumes that you develop under the latest version of Debain/Ubuntu.
+    You can of course also use your favourite distribution. You just might have
+    to adapt the commands below slightly, in particular the commands for
+    installing additional software.

 
 ## Installing Nominatim
 
 The first step is to install Nominatim itself. Please follow the installation
 instructions in the [Admin section](../admin/Installation.md). You don't need
 
 ## Installing Nominatim
 
 The first step is to install Nominatim itself. Please follow the installation
 instructions in the [Admin section](../admin/Installation.md). You don't need

-to set up a webserver for development, the webserver that is included with PHP
-is sufficient.
+to set up a webserver for development, the webserver that can be started
+via `nominatim serve` is sufficient.

 
 

-If you want to run Nominatim in a VM via Vagrant, use the default `ubuntu` setup.
+If you want to run Nominatim in a VM via Vagrant, use the default `ubuntu24` setup.

 Vagrant's libvirt provider runs out-of-the-box under Ubuntu. You also need to
 install an NFS daemon to enable directory sharing between host and guest. The
 following packages should get you started:
 Vagrant's libvirt provider runs out-of-the-box under Ubuntu. You also need to
 install an NFS daemon to enable directory sharing between host and guest. The
 following packages should get you started:


@@ -25,39 +25,61 @@ following packages should get you started:
 
 ## Prerequisites for testing and documentation
 
 
 ## Prerequisites for testing and documentation
 

-The Nominatim tests suite consists of behavioural tests (using behave) and
-unit tests (using PHPUnit). It has the following additional requirements:
+The Nominatim test suite consists of behavioural tests (using behave) and
+unit tests (using PHPUnit for PHP code and pytest for Python code).
+It has the following additional requirements:

 
 

-* [behave test framework](https://github.com/behave/behave) >= 1.2.5
-* [nose](https://nose.readthedocs.org)
-* [pytidylib](http://countergram.com/open-source/pytidylib)
-* [phpunit](https://phpunit.de) >= 7.3
+* [behave test framework](https://behave.readthedocs.io) >= 1.2.6
+* [phpunit](https://phpunit.de) (9.5 is known to work)

 * [PHP CodeSniffer](https://github.com/squizlabs/PHP_CodeSniffer)
 * [PHP CodeSniffer](https://github.com/squizlabs/PHP_CodeSniffer)

+* [Pylint](https://pylint.org/) (CI always runs the latest version from pip)
+* [mypy](http://mypy-lang.org/) (plus typing information for external libs)
+* [Python Typing Extensions](https://github.com/python/typing_extensions) (for Python < 3.9)
+* [pytest](https://pytest.org)
+* [pytest-asyncio](https://pytest-asyncio.readthedocs.io)
+
+For testing the Python search frontend, you need to install extra dependencies
+depending on your choice of webserver framework:
+
+* [httpx](https://www.python-httpx.org/) (starlette only)
+* [asgi-lifespan](https://github.com/florimondmanca/asgi-lifespan) (starlette only)

 
 The documentation is built with mkdocs:
 
 * [mkdocs](https://www.mkdocs.org/) >= 1.1.2
 
 The documentation is built with mkdocs:
 
 * [mkdocs](https://www.mkdocs.org/) >= 1.1.2

+* [mkdocstrings](https://mkdocstrings.github.io/) >= 0.25
+* [mkdocs-material](https://squidfunk.github.io/mkdocs-material/)

 
 ### Installing prerequisites on Ubuntu/Debian
 
 
 ### Installing prerequisites on Ubuntu/Debian
 

-Some of the Python packages require the newest version which is not yet
-available with the current distributions. Therefore it is recommended to
-install pip to get the newest versions.
+The Python tools should always be run with the most recent version.
+In particular, pylint tends to have a lot of breaking changes between versions.
+The easiest way, to handle these Python dependencies is to run your
+development from within a virtual environment.

 
 

-To install all necessary packages run:
+To set up the virtual environment with all necessary packages run:

 
 ```sh
 
 ```sh

-sudo apt install php-cgi phpunit php-codesniffer \
-                 python3-pip python3-setuptools python3-dev
-
-pip3 install --user behave nose mkdocs
+virtualenv ~/nominatim-dev-venv
+~/nominatim-dev-venv/bin/pip install\
+    psycopg2-binary psutil psycopg[binary] PyICU SQLAlchemy \
+    python-dotenv jinja2 pyYAML datree \
+    behave mkdocs mkdocstrings pytest pytest-asyncio pylint \
+    types-jinja2 types-markupsafe types-psutil types-psycopg2 \
+    types-pygments types-pyyaml types-requests types-ujson \
+    types-urllib3 typing-extensions unicorn falcon

 ```
 
 ```
 

-The `mkdocs` executable will be located in `.local/bin`. You may have to add
-this directory to your path, for example by running:
+Now enter the virtual environment whenever you want to develop:

 
 

+```sh
+. ~/nominatim-dev-venv/bin/activate

 ```
 ```

-echo 'export PATH=~/.local/bin:$PATH' > ~/.profile
+
+For installing the PHP development tools, run:
+
+```sh
+sudo apt install php-cgi phpunit php-codesniffer

 ```
 
 If your distribution does not have PHPUnit 7.3+, you can install it (as well
 ```
 
 If your distribution does not have PHPUnit 7.3+, you can install it (as well


@@ -70,66 +92,39 @@ composer global require "phpunit/phpunit=8.*"
 ```
 
 The binaries are found in `.config/composer/vendor/bin`. You need to add this
 ```
 
 The binaries are found in `.config/composer/vendor/bin`. You need to add this

-to your PATH as well:
+to your PATH:

 
 ```
 echo 'export PATH=~/.config/composer/vendor/bin:$PATH' > ~/.profile
 ```
 
 
 ```
 echo 'export PATH=~/.config/composer/vendor/bin:$PATH' > ~/.profile
 ```
 

+### Running Nominatim during development

 
 

-## Executing Tests
-
-All tests are located in the `\test` directory.
-
-### Preparing the test database
-
-Some of the behavioural test expect a test database to be present. You need at
-least 2GB RAM and 10GB disk space to create the database.
-
-First create a separate directory for the test DB and Fetch the test planet
-data and the Tiger data for South Dakota:
-
-```
-mkdir testdb
-cd testdb
-wget https://www.nominatim.org/data/test/nominatim-api-testdata.pbf
-wget -O - https://nominatim.org/data/tiger2018-nominatim-preprocessed.tar.gz | tar xz --wildcards --no-anchored '46*'
-```
-
-Configure and build Nominatim in the usual way:
-
-```
-cmake $USERNAME/Nominatim
-make
-```
-
-Copy the test settings:
+The source code for Nominatim can be found in the `src` directory and can
+be run in-place. The source directory features a special script
+`nominatim-cli.py` which does the same as the installed 'nominatim' binary
+but executes against the code in the source tree. For example:

 
 ```
 
 ```

-cp $USERNAME/Nominatim/test/testdb/local.php settings/
+me@machine:~$ cd Nomiantim
+me@machine:~Nomiantim$ ./nominatim-cli.py --version
+Nominatim version 4.4.99-1

 ```
 
 ```
 

-Inspect the file to check that all settings are correct for your local setup.
-
-Now you can import the test database:
+Make sure you have activated the virtual environment that holds all
+necessary dependencies.

 
 

-```
-dropdb --if-exists test_api_nominatim
-./utils/setup.php --all --osm-file nominatim-api-testdb.pbf 2>&1 | tee import.log
-./utils/specialphrases.php --wiki-import | psql -d test_api_nominatim 2>&1 | tee -a import.log
-./utils/setup.php --import-tiger-data 2>&1 | tee -a import.log
-```
+## Executing Tests

 
 

-### Running the tests
+All tests are located in the `/test` directory.

 
 

-To run all tests just go to the test directory and run make:
+To run all tests, run make from the source root:

 
 ```sh
 
 ```sh

-cd test
-make
+make tests

 ```
 
 ```
 

-To skip tests that require the test database, run `make no-test-db` instead.
+There are also goals for executing parts of the test suite: mypy, lint, pytest, bdd.

 
 For more information about the structure of the tests and how to change and
 extend the test suite, see the [Testing chapter](Testing.md).
 
 For more information about the structure of the tests and how to change and
 extend the test suite, see the [Testing chapter](Testing.md).


@@ -155,7 +150,7 @@ symlinks (see `CMakeLists.txt` for the exact steps).
 Now you can start webserver for local testing
 
 ```
 Now you can start webserver for local testing
 
 ```

-build> mkdocs serve
+build> make serve-doc

 [server:296] Serving on http://127.0.0.1:8000
 [handlers:62] Start watching changes
 ```
 [server:296] Serving on http://127.0.0.1:8000
 [handlers:62] Start watching changes
 ```


@@ -164,7 +159,7 @@ If you develop inside a Vagrant virtual machine, use a port that is forwarded
 to your host:
 
 ```
 to your host:
 
 ```

-build> mkdocs serve --dev-addr 0.0.0.0:8088
+build> PYTHONPATH=$SRCDIR mkdocs serve --dev-addr 0.0.0.0:8088

 [server:296] Serving on http://0.0.0.0:8088
 [handlers:62] Start watching changes
 ```
 [server:296] Serving on http://0.0.0.0:8088
 [handlers:62] Start watching changes
 ```