IF addr_street is null and addr_place is null THEN
select nodes from planet_osm_ways where id = wayid INTO waynodes;
- FOR location IN SELECT placex.street, placex.addr_place from placex
+ FOR location IN SELECT placex.address from placex
where osm_type = 'N' and osm_id = ANY(waynodes)
- and (placex.street is not null or placex.addr_place is not null)
+ and placex.address is not null
+ and (placex.address ? 'street' or placex.address ? 'place')
and indexed_status < 100
limit 1 LOOP
- addr_street = location.street;
- addr_place = location.addr_place;
+ addr_street = location.address->'street';
+ addr_place = location.address->'place';
END LOOP;
END IF;
LANGUAGE plpgsql;
-CREATE OR REPLACE FUNCTION insert_osmline(wayid BIGINT, interpolationtype TEXT,
- street TEXT, addr_place TEXT,
- defpostalcode TEXT, country_code TEXT,
- geom GEOMETRY)
-RETURNS INTEGER AS $$
-DECLARE
-
- newpoints INTEGER;
- waynodes BIGINT[];
- nodeid BIGINT;
- prevnode RECORD;
- nextnode RECORD;
- startnumber INTEGER;
- endnumber INTEGER;
- housenum INTEGER;
- linegeo GEOMETRY;
- splitline GEOMETRY;
- sectiongeo GEOMETRY;
- pointgeo GEOMETRY;
- place_centroid GEOMETRY;
- calculated_country_code VARCHAR(2);
- partition INTEGER;
- geometry_sector INTEGER;
-
+CREATE OR REPLACE FUNCTION osmline_insert() RETURNS TRIGGER
+ AS $$
BEGIN
- place_centroid := ST_PointOnSurface(geom);
- calculated_country_code := lower(get_country_code(place_centroid));
- partition := get_partition(calculated_country_code);
- geometry_sector := geometry_sector(partition, place_centroid);
-
- IF interpolationtype != 'odd' AND interpolationtype != 'even' AND interpolationtype!='all' THEN
- -- other interpolation types than odd/even/all (e.g. numeric ones) are not supported
- RETURN 0;
- END IF;
-
- select nodes from planet_osm_ways where id = wayid INTO waynodes;
-
- IF array_upper(waynodes, 1) IS NULL THEN
- RETURN 0;
- END IF;
-
- linegeo := geom;
- startnumber := NULL;
-
- FOR nodeidpos in 1..array_upper(waynodes, 1) LOOP
-
- select * from place where osm_type = 'N' and osm_id = waynodes[nodeidpos]::BIGINT
- and housenumber is not NULL limit 1 INTO nextnode;
- --RAISE NOTICE 'Nextnode.place_id: %s', nextnode.place_id;
- IF nextnode.osm_id IS NOT NULL THEN
- --RAISE NOTICE 'place_id is not null';
- IF nodeidpos > 1 and nodeidpos < array_upper(waynodes, 1) THEN
- -- Make sure that the point is actually on the line. That might
- -- be a bit paranoid but ensures that the algorithm still works
- -- should osm2pgsql attempt to repair geometries.
- splitline := split_line_on_node(linegeo, nextnode.geometry);
- sectiongeo := ST_GeometryN(splitline, 1);
- linegeo := ST_GeometryN(splitline, 2);
- ELSE
- sectiongeo = linegeo;
- END IF;
- endnumber := substring(nextnode.housenumber,'[0-9]+')::integer;
-
- IF startnumber IS NOT NULL AND endnumber IS NOT NULL
- AND startnumber != endnumber
- AND ST_GeometryType(sectiongeo) = 'ST_LineString' THEN
-
- IF (startnumber > endnumber) THEN
- housenum := endnumber;
- endnumber := startnumber;
- startnumber := housenum;
- sectiongeo := ST_Reverse(sectiongeo);
- END IF;
+ NEW.place_id := nextval('seq_place');
+ NEW.indexed_date := now();
- insert into location_property_osmline
- values (sectiongeo, nextval('seq_place'), partition, wayid, NULL,
- startnumber, endnumber, interpolationtype,
- coalesce(street, prevnode.street, nextnode.street),
- coalesce(addr_place, prevnode.addr_place, nextnode.addr_place),
- coalesce(defpostalcode, prevnode.postcode, nextnode.postcode),
- calculated_country_code, geometry_sector, 2, now());
+ IF NEW.indexed_status IS NULL THEN
+ IF NEW.address is NULL OR NOT NEW.address ? 'interpolation'
+ OR NEW.address->'interpolation' NOT IN ('odd', 'even', 'all') THEN
+ -- other interpolation types than odd/even/all (e.g. numeric ones) are not supported
+ RETURN NULL;
END IF;
- -- early break if we are out of line string,
- -- might happen when a line string loops back on itself
- IF ST_GeometryType(linegeo) != 'ST_LineString' THEN
- RETURN 0;
- END IF;
+ NEW.indexed_status := 1; --STATUS_NEW
+ NEW.country_code := lower(get_country_code(NEW.linegeo));
- startnumber := substring(nextnode.housenumber,'[0-9]+')::integer;
- prevnode := nextnode;
- END IF;
- END LOOP;
+ NEW.partition := get_partition(NEW.country_code);
+ NEW.geometry_sector := geometry_sector(NEW.partition, NEW.linegeo);
+ END IF;
- RETURN 1;
+ RETURN NEW;
END;
$$
LANGUAGE plpgsql;
classtable TEXT;
line RECORD;
BEGIN
- --DEBUG: RAISE WARNING '% %',NEW.osm_type,NEW.osm_id;
-
- -- ignore interpolated addresses, not necessary anymore, cause interpolated addresses are now in location_property_osmline
- IF NEW.class = 'place' and NEW.type = 'address' THEN
- RETURN NEW;
- END IF;
-
- IF ST_IsEmpty(NEW.geometry) OR NOT ST_IsValid(NEW.geometry) OR ST_X(ST_Centroid(NEW.geometry))::text in ('NaN','Infinity','-Infinity') OR ST_Y(ST_Centroid(NEW.geometry))::text in ('NaN','Infinity','-Infinity') THEN
- -- block all invalid geometary - just not worth the risk. seg faults are causing serious problems.
- RAISE WARNING 'invalid geometry %',NEW.osm_id;
- RETURN NULL;
- END IF;
-
--DEBUG: RAISE WARNING '% % % %',NEW.osm_type,NEW.osm_id,NEW.class,NEW.type;
NEW.place_id := nextval('seq_place');
NEW.indexed_status := 1; --STATUS_NEW
- NEW.calculated_country_code := lower(get_country_code(NEW.geometry));
+ NEW.country_code := lower(get_country_code(NEW.geometry));
- NEW.partition := get_partition(NEW.calculated_country_code);
+ NEW.partition := get_partition(NEW.country_code);
NEW.geometry_sector := geometry_sector(NEW.partition, NEW.geometry);
-- copy 'name' to or from the default language (if there is a default language)
IF NEW.name is not null AND array_upper(akeys(NEW.name),1) > 1 THEN
- default_language := get_country_language_code(NEW.calculated_country_code);
+ default_language := get_country_language_code(NEW.country_code);
IF default_language IS NOT NULL THEN
IF NEW.name ? 'name' AND NOT NEW.name ? ('name:'||default_language) THEN
NEW.name := NEW.name || hstore(('name:'||default_language), (NEW.name -> 'name'));
END IF;
END IF;
- IF NEW.admin_level > 15 THEN
- NEW.admin_level := 15;
- END IF;
-
- IF NEW.housenumber IS NOT NULL THEN
- i := getorcreate_housenumber_id(make_standard_name(NEW.housenumber));
- END IF;
-
IF NEW.osm_type = 'X' THEN
-- E'X'ternal records should already be in the right format so do nothing
ELSE
-- By doing in postgres we have the country available to us - currently only used for postcode
IF NEW.class in ('place','boundary') AND NEW.type in ('postcode','postal_code') THEN
- IF NEW.postcode IS NULL THEN
+ IF NEW.address IS NULL OR NOT NEW.address ? 'postcode' THEN
-- most likely just a part of a multipolygon postcode boundary, throw it away
RETURN NULL;
END IF;
+ NEW.postcode := NEW.address->'postcode';
NEW.name := hstore('ref', NEW.postcode);
- IF NEW.calculated_country_code = 'gb' THEN
+ IF NEW.country_code = 'gb' THEN
IF NEW.postcode ~ '^([A-Z][A-Z]?[0-9][0-9A-Z]? [0-9][A-Z][A-Z])$' THEN
NEW.rank_search := 25;
NEW.rank_address := 5;
END IF;
- ELSEIF NEW.calculated_country_code = 'sg' THEN
+ ELSEIF NEW.country_code = 'sg' THEN
IF NEW.postcode ~ '^([0-9]{6})$' THEN
NEW.rank_search := 25;
NEW.rank_address := 11;
END IF;
- ELSEIF NEW.calculated_country_code = 'de' THEN
+ ELSEIF NEW.country_code = 'de' THEN
IF NEW.postcode ~ '^([0-9]{5})$' THEN
NEW.rank_search := 21;
IF NEW.type in ('continent') THEN
NEW.rank_search := 2;
NEW.rank_address := NEW.rank_search;
- NEW.calculated_country_code := NULL;
+ NEW.country_code := NULL;
ELSEIF NEW.type in ('sea') THEN
NEW.rank_search := 2;
NEW.rank_address := 0;
- NEW.calculated_country_code := NULL;
+ NEW.country_code := NULL;
ELSEIF NEW.type in ('country') THEN
NEW.rank_search := 4;
NEW.rank_address := NEW.rank_search;
-- a country code make no sense below rank 4 (country)
IF NEW.rank_search < 4 THEN
- NEW.calculated_country_code := NULL;
+ NEW.country_code := NULL;
END IF;
-- Block import below rank 22
-- work around bug in postgis, this may have been fixed in 2.0.0 (see http://trac.osgeo.org/postgis/ticket/547)
update placex set indexed_status = 2 where (st_covers(NEW.geometry, placex.geometry) OR ST_Intersects(NEW.geometry, placex.geometry))
- AND rank_search > NEW.rank_search and indexed_status = 0 and ST_geometrytype(placex.geometry) = 'ST_Point' and (rank_search < 28 or name is not null or (NEW.rank_search >= 16 and addr_place is not null));
+ AND rank_search > NEW.rank_search and indexed_status = 0 and ST_geometrytype(placex.geometry) = 'ST_Point' and (rank_search < 28 or name is not null or (NEW.rank_search >= 16 and address ? 'place'));
update placex set indexed_status = 2 where (st_covers(NEW.geometry, placex.geometry) OR ST_Intersects(NEW.geometry, placex.geometry))
- AND rank_search > NEW.rank_search and indexed_status = 0 and ST_geometrytype(placex.geometry) != 'ST_Point' and (rank_search < 28 or name is not null or (NEW.rank_search >= 16 and addr_place is not null));
+ AND rank_search > NEW.rank_search and indexed_status = 0 and ST_geometrytype(placex.geometry) != 'ST_Point' and (rank_search < 28 or name is not null or (NEW.rank_search >= 16 and address ? 'place'));
END IF;
ELSE
-- mark nearby items for re-indexing, where 'nearby' depends on the features rank_search and is a complete guess :(
update location_property_osmline set indexed_status = 2 where indexed_status = 0 and ST_DWithin(location_property_osmline.linegeo, NEW.geometry, diameter);
ELSEIF NEW.rank_search >= 16 THEN
-- up to rank 16, street-less addresses may need reparenting
- update placex set indexed_status = 2 where indexed_status = 0 and rank_search > NEW.rank_search and ST_DWithin(placex.geometry, NEW.geometry, diameter) and (rank_search < 28 or name is not null or addr_place is not null);
+ update placex set indexed_status = 2 where indexed_status = 0 and rank_search > NEW.rank_search and ST_DWithin(placex.geometry, NEW.geometry, diameter) and (rank_search < 28 or name is not null or address ? 'place');
ELSE
-- for all other places the search terms may change as well
update placex set indexed_status = 2 where indexed_status = 0 and rank_search > NEW.rank_search and ST_DWithin(placex.geometry, NEW.geometry, diameter) and (rank_search < 28 or name is not null);
AS $$
DECLARE
place_centroid GEOMETRY;
+ waynodes BIGINT[];
+ prevnode RECORD;
+ nextnode RECORD;
+ startnumber INTEGER;
+ endnumber INTEGER;
+ housenum INTEGER;
+ linegeo GEOMETRY;
+ splitline GEOMETRY;
+ sectiongeo GEOMETRY;
+ postcode TEXT;
+ seg_postcode TEXT;
BEGIN
-- deferred delete
IF OLD.indexed_status = 100 THEN
RETURN NEW;
END IF;
- -- do the reparenting: (finally here, because ALL places in placex, that are needed for reparenting, need to be up to date)
- -- (the osm interpolationline in location_property_osmline was marked for reparenting in placex_insert/placex_delete with index_status = 1 or 2 (1 inset, 2 delete)
- -- => index.c: sets index_status back to 0
- -- => triggers this function)
+ NEW.interpolationtype = NEW.address->'interpolation';
+
place_centroid := ST_PointOnSurface(NEW.linegeo);
- -- marking descendants for reparenting is not needed, because there are actually no descendants for interpolation lines
- NEW.parent_place_id = get_interpolation_parent(NEW.osm_id, NEW.street, NEW.addr_place,
+ NEW.parent_place_id = get_interpolation_parent(NEW.osm_id, NEW.address->'street',
+ NEW.address->'place',
NEW.partition, place_centroid, NEW.linegeo);
- return NEW;
+
+
+ IF NEW.address is not NULL and NEW.address ? 'postcode' THEN
+ NEW.postcode = NEW.address->'postcode';
+ END IF;
+
+ -- if the line was newly inserted, split the line as necessary
+ IF OLD.indexed_status = 1 THEN
+ select nodes from planet_osm_ways where id = NEW.osm_id INTO waynodes;
+
+ IF array_upper(waynodes, 1) IS NULL THEN
+ RETURN NEW;
+ END IF;
+
+ linegeo := NEW.linegeo;
+ startnumber := NULL;
+ postcode := NEW.postcode;
+
+ FOR nodeidpos in 1..array_upper(waynodes, 1) LOOP
+
+ select osm_id, address, geometry
+ from place where osm_type = 'N' and osm_id = waynodes[nodeidpos]::BIGINT
+ and address is not NULL and address ? 'housenumber' limit 1 INTO nextnode;
+ --RAISE NOTICE 'Nextnode.place_id: %s', nextnode.place_id;
+ IF nextnode.osm_id IS NOT NULL THEN
+ --RAISE NOTICE 'place_id is not null';
+ IF nodeidpos > 1 and nodeidpos < array_upper(waynodes, 1) THEN
+ -- Make sure that the point is actually on the line. That might
+ -- be a bit paranoid but ensures that the algorithm still works
+ -- should osm2pgsql attempt to repair geometries.
+ splitline := split_line_on_node(linegeo, nextnode.geometry);
+ sectiongeo := ST_GeometryN(splitline, 1);
+ linegeo := ST_GeometryN(splitline, 2);
+ ELSE
+ sectiongeo = linegeo;
+ END IF;
+ endnumber := substring(nextnode.address->'housenumber','[0-9]+')::integer;
+
+ IF startnumber IS NOT NULL AND endnumber IS NOT NULL
+ AND startnumber != endnumber
+ AND ST_GeometryType(sectiongeo) = 'ST_LineString' THEN
+
+ IF (startnumber > endnumber) THEN
+ housenum := endnumber;
+ endnumber := startnumber;
+ startnumber := housenum;
+ sectiongeo := ST_Reverse(sectiongeo);
+ END IF;
+
+ seg_postcode := coalesce(postcode,
+ prevnode.address->'postcode',
+ nextnode.address->'postcode');
+
+ IF NEW.startnumber IS NULL THEN
+ NEW.startnumber := startnumber;
+ NEW.endnumber := endnumber;
+ NEW.linegeo := sectiongeo;
+ NEW.postcode := seg_postcode;
+ ELSE
+ insert into location_property_osmline
+ (linegeo, partition, osm_id, parent_place_id,
+ startnumber, endnumber, interpolationtype,
+ address, postcode, country_code,
+ geometry_sector, indexed_status)
+ values (sectiongeo, NEW.partition, NEW.osm_id, NEW.parent_place_id,
+ startnumber, endnumber, NEW.interpolationtype,
+ NEW.address, seg_postcode,
+ NEW.country_code, NEW.geometry_sector, 0);
+ END IF;
+ END IF;
+
+ -- early break if we are out of line string,
+ -- might happen when a line string loops back on itself
+ IF ST_GeometryType(linegeo) != 'ST_LineString' THEN
+ RETURN NEW;
+ END IF;
+
+ startnumber := substring(nextnode.address->'housenumber','[0-9]+')::integer;
+ prevnode := nextnode;
+ END IF;
+ END LOOP;
+ END IF;
+
+ -- marking descendants for reparenting is not needed, because there are
+ -- actually no descendants for interpolation lines
+ RETURN NEW;
END;
$$
LANGUAGE plpgsql;
+
+
CREATE OR REPLACE FUNCTION placex_update() RETURNS
TRIGGER
AS $$
address_street_word_id INTEGER;
address_street_word_ids INTEGER[];
parent_place_id_rank BIGINT;
-
+
+ addr_street TEXT;
+ addr_place TEXT;
+
isin TEXT[];
isin_tokens INT[];
nameaddress_vector INTEGER[];
linked_node_id BIGINT;
+ linked_importance FLOAT;
+ linked_wikipedia TEXT;
result BOOLEAN;
BEGIN
RETURN NEW;
END IF;
- -- ignore interpolated addresses
- IF NEW.class = 'place' and NEW.type = 'address' THEN
- RETURN NEW;
- END IF;
-
--DEBUG: RAISE WARNING 'placex_update % %',NEW.osm_type,NEW.osm_id;
--RAISE WARNING '%',NEW.place_id;
RETURN NEW;
END IF;
+ IF NEW.address is not NULL THEN
+ IF NEW.address ? 'conscriptionnumber' THEN
+ i := getorcreate_housenumber_id(make_standard_name(NEW.address->'conscriptionnumber'));
+ IF NEW.address ? 'streetnumber' THEN
+ i := getorcreate_housenumber_id(make_standard_name(NEW.address->'streetnumber'));
+ NEW.housenumber := (NEW.address->'conscriptionnumber') || '/' || (NEW.address->'streetnumber');
+ ELSE
+ NEW.housenumber := NEW.address->'conscriptionnumber';
+ END IF;
+ ELSEIF NEW.address ? 'streetnumber' THEN
+ NEW.housenumber := NEW.address->'streetnumber';
+ i := getorcreate_housenumber_id(make_standard_name(NEW.address->'streetnumber'));
+ ELSEIF NEW.address ? 'housenumber' THEN
+ NEW.housenumber := NEW.address->'housenumber';
+ i := getorcreate_housenumber_id(make_standard_name(NEW.housenumber));
+ END IF;
+
+ addr_street = NEW.address->'street';
+ addr_place = NEW.address->'place';
+
+ NEW.postcode = NEW.address->'postcode';
+ END IF;
+
-- Speed up searches - just use the centroid of the feature
-- cheaper but less acurate
place_centroid := ST_PointOnSurface(NEW.geometry);
NEW.centroid := null;
-- recalculate country and partition
- IF NEW.rank_search = 4 THEN
+ IF NEW.rank_search = 4 AND NEW.address is not NULL AND NEW.address ? 'country' THEN
-- for countries, believe the mapped country code,
-- so that we remain in the right partition if the boundaries
-- suddenly expand.
+ NEW.country_code := lower(NEW.address->'country');
NEW.partition := get_partition(lower(NEW.country_code));
IF NEW.partition = 0 THEN
- NEW.calculated_country_code := lower(get_country_code(place_centroid));
- NEW.partition := get_partition(NEW.calculated_country_code);
- ELSE
- NEW.calculated_country_code := lower(NEW.country_code);
+ NEW.country_code := lower(get_country_code(place_centroid));
+ NEW.partition := get_partition(NEW.country_code);
END IF;
ELSE
- IF NEW.rank_search > 4 THEN
- --NEW.calculated_country_code := lower(get_country_code(NEW.geometry, NEW.country_code));
- NEW.calculated_country_code := lower(get_country_code(place_centroid));
+ IF NEW.rank_search >= 4 THEN
+ NEW.country_code := lower(get_country_code(place_centroid));
ELSE
- NEW.calculated_country_code := NULL;
+ NEW.country_code := NULL;
END IF;
- NEW.partition := get_partition(NEW.calculated_country_code);
+ NEW.partition := get_partition(NEW.country_code);
END IF;
-- waterway ways are linked when they are part of a relation and have the same class/type
END IF;
-- Adding ourselves to the list simplifies address calculations later
- INSERT INTO place_addressline VALUES (NEW.place_id, NEW.place_id, true, true, 0, NEW.rank_address);
+ INSERT INTO place_addressline (place_id, address_place_id, fromarea, isaddress, distance, cached_rank_address)
+ VALUES (NEW.place_id, NEW.place_id, true, true, 0, NEW.rank_address);
-- What level are we searching from
search_maxrank := NEW.rank_search;
-- Thought this wasn't needed but when we add new languages to the country_name table
-- we need to update the existing names
IF NEW.name is not null AND array_upper(akeys(NEW.name),1) > 1 THEN
- default_language := get_country_language_code(NEW.calculated_country_code);
+ default_language := get_country_language_code(NEW.country_code);
IF default_language IS NOT NULL THEN
IF NEW.name ? 'name' AND NOT NEW.name ? ('name:'||default_language) THEN
NEW.name := NEW.name || hstore(('name:'||default_language), (NEW.name -> 'name'));
END LOOP;
NEW.importance := null;
- select language||':'||title,importance from get_wikipedia_match(NEW.extratags, NEW.calculated_country_code) INTO NEW.wikipedia,NEW.importance;
+ select language||':'||title,importance from get_wikipedia_match(NEW.extratags, NEW.country_code) INTO NEW.wikipedia,NEW.importance;
IF NEW.importance IS NULL THEN
select language||':'||title,importance from wikipedia_article where osm_type = NEW.osm_type and osm_id = NEW.osm_id order by importance desc limit 1 INTO NEW.wikipedia,NEW.importance;
END IF;
-- if we have a POI and there is no address information,
-- see if we can get it from a surrounding building
- IF NEW.osm_type = 'N' AND NEW.street IS NULL AND NEW.addr_place IS NULL
+ IF NEW.osm_type = 'N' AND addr_street IS NULL AND addr_place IS NULL
AND NEW.housenumber IS NULL THEN
FOR location IN select * from placex where ST_Covers(geometry, place_centroid)
- and (housenumber is not null or street is not null or addr_place is not null)
+ and address is not null
+ and (address ? 'housenumber' or address ? 'street' or address ? 'place')
and rank_search > 28 AND ST_GeometryType(geometry) in ('ST_Polygon','ST_MultiPolygon')
limit 1
LOOP
- NEW.housenumber := location.housenumber;
- NEW.street := location.street;
- NEW.addr_place := location.addr_place;
+ NEW.housenumber := location.address->'housenumber';
+ addr_street := location.address->'street';
+ addr_place := location.address->'place';
END LOOP;
END IF;
-- Note that addr:street links can only be indexed once the street itself is indexed
- IF NEW.parent_place_id IS NULL AND NEW.street IS NOT NULL THEN
- address_street_word_ids := get_name_ids(make_standard_name(NEW.street));
+ IF NEW.parent_place_id IS NULL AND addr_street IS NOT NULL THEN
+ address_street_word_ids := get_name_ids(make_standard_name(addr_street));
IF address_street_word_ids IS NOT NULL THEN
FOR location IN SELECT * from getNearestNamedRoadFeature(NEW.partition, place_centroid, address_street_word_ids) LOOP
NEW.parent_place_id := location.place_id;
END IF;
END IF;
- IF NEW.parent_place_id IS NULL AND NEW.addr_place IS NOT NULL THEN
- address_street_word_ids := get_name_ids(make_standard_name(NEW.addr_place));
+ IF NEW.parent_place_id IS NULL AND addr_place IS NOT NULL THEN
+ address_street_word_ids := get_name_ids(make_standard_name(addr_place));
IF address_street_word_ids IS NOT NULL THEN
FOR location IN SELECT * from getNearestNamedPlaceFeature(NEW.partition, place_centroid, address_street_word_ids) LOOP
NEW.parent_place_id := location.place_id;
-- Is this node part of a way?
IF NEW.parent_place_id IS NULL AND NEW.osm_type = 'N' THEN
- FOR location IN select p.place_id, p.osm_id, p.parent_place_id, p.rank_search, p.street, p.addr_place from placex p, planet_osm_ways w
+ FOR location IN select p.place_id, p.osm_id, p.parent_place_id, p.rank_search, p.address from placex p, planet_osm_ways w
where p.osm_type = 'W' and p.rank_search >= 26 and p.geometry && NEW.geometry and w.id = p.osm_id and NEW.osm_id = any(w.nodes)
LOOP
END IF;
-- If the way mentions a street or place address, try that for parenting.
- IF NEW.parent_place_id IS NULL AND location.street IS NOT NULL THEN
- address_street_word_ids := get_name_ids(make_standard_name(location.street));
+ IF NEW.parent_place_id IS NULL AND location.address ? 'street' THEN
+ address_street_word_ids := get_name_ids(make_standard_name(location.address->'street'));
IF address_street_word_ids IS NOT NULL THEN
FOR linkedplacex IN SELECT place_id from getNearestNamedRoadFeature(NEW.partition, place_centroid, address_street_word_ids) LOOP
NEW.parent_place_id := linkedplacex.place_id;
END IF;
END IF;
- IF NEW.parent_place_id IS NULL AND location.addr_place IS NOT NULL THEN
- address_street_word_ids := get_name_ids(make_standard_name(location.addr_place));
+ IF NEW.parent_place_id IS NULL AND location.address ? 'place' THEN
+ address_street_word_ids := get_name_ids(make_standard_name(location.address->'place'));
IF address_street_word_ids IS NOT NULL THEN
FOR linkedplacex IN SELECT place_id from getNearestNamedPlaceFeature(NEW.partition, place_centroid, address_street_word_ids) LOOP
NEW.parent_place_id := linkedplacex.place_id;
-- Get the details of the parent road
select * from search_name where place_id = NEW.parent_place_id INTO location;
- NEW.calculated_country_code := location.country_code;
+ NEW.country_code := location.country_code;
- -- Merge the postcode into the parent's address if necessary XXXX
+ -- Merge the postcode into the parent's address if necessary
IF NEW.postcode IS NOT NULL THEN
isin_tokens := '{}'::int[];
address_street_word_id := getorcreate_word_id(make_standard_name(NEW.postcode));
-- Just be happy with inheriting from parent road only
IF NEW.rank_search <= 25 and NEW.rank_address > 0 THEN
- result := add_location(NEW.place_id, NEW.calculated_country_code, NEW.partition, name_vector, NEW.rank_search, NEW.rank_address, NEW.geometry);
+ result := add_location(NEW.place_id, NEW.country_code, NEW.partition, name_vector, NEW.rank_search, NEW.rank_address, NEW.geometry);
END IF;
- result := insertSearchName(NEW.partition, NEW.place_id, NEW.calculated_country_code, name_vector, nameaddress_vector, NEW.rank_search, NEW.rank_address, NEW.importance, place_centroid, NEW.geometry);
+ result := insertSearchName(NEW.partition, NEW.place_id, NEW.country_code, name_vector, nameaddress_vector, NEW.rank_search, NEW.rank_address, NEW.importance, place_centroid, NEW.geometry);
return NEW;
END IF;
IF relation_members IS NOT NULL THEN
FOR relMember IN select get_osm_rel_members(relation_members,ARRAY['label']) as member LOOP
- FOR linkedPlacex IN select * from placex where osm_type = upper(substring(relMember.member,1,1))::char(1)
+ FOR linkedPlacex IN select * from placex where osm_type = upper(substring(relMember.member,1,1))::"char"
and osm_id = substring(relMember.member,2,10000)::bigint order by rank_search desc limit 1 LOOP
-- If we don't already have one use this as the centre point of the geometry
-- keep a note of the node id in case we need it for wikipedia in a bit
linked_node_id := linkedPlacex.osm_id;
+ select language||':'||title,importance from get_wikipedia_match(linkedPlacex.extratags, NEW.country_code) INTO linked_wikipedia,linked_importance;
END LOOP;
END LOOP;
FOR relMember IN select get_osm_rel_members(relation_members,ARRAY['admin_center','admin_centre']) as member LOOP
- FOR linkedPlacex IN select * from placex where osm_type = upper(substring(relMember.member,1,1))::char(1)
+ FOR linkedPlacex IN select * from placex where osm_type = upper(substring(relMember.member,1,1))::"char"
and osm_id = substring(relMember.member,2,10000)::bigint order by rank_search desc limit 1 LOOP
-- For an admin centre we also want a name match - still not perfect, for example 'new york, new york'
-- keep a note of the node id in case we need it for wikipedia in a bit
linked_node_id := linkedPlacex.osm_id;
+ select language||':'||title,importance from get_wikipedia_match(linkedPlacex.extratags, NEW.country_code) INTO linked_wikipedia,linked_importance;
END IF;
END LOOP;
make_standard_name(name->'name') = make_standard_name(NEW.name->'name')
AND placex.rank_address = NEW.rank_address
AND placex.place_id != NEW.place_id
- AND placex.osm_type = 'N'::char(1) AND placex.rank_search < 26
+ AND placex.osm_type = 'N' AND placex.rank_search < 26
AND st_covers(NEW.geometry, placex.geometry)
LOOP
-- keep a note of the node id in case we need it for wikipedia in a bit
linked_node_id := linkedPlacex.osm_id;
+ select language||':'||title,importance from get_wikipedia_match(linkedPlacex.extratags, NEW.country_code) INTO linked_wikipedia,linked_importance;
END LOOP;
END IF;
-- from the linked place. Make sure a name tag for the default language exists in
-- this case.
IF NEW.name is not null AND array_upper(akeys(NEW.name),1) > 1 THEN
- default_language := get_country_language_code(NEW.calculated_country_code);
+ default_language := get_country_language_code(NEW.country_code);
IF default_language IS NOT NULL THEN
IF NEW.name ? 'name' AND NOT NEW.name ? ('name:'||default_language) THEN
NEW.name := NEW.name || hstore(('name:'||default_language), (NEW.name -> 'name'));
END IF;
END IF;
- -- Did we gain a wikipedia tag in the process? then we need to recalculate our importance
- IF NEW.importance is null THEN
- select language||':'||title,importance from get_wikipedia_match(NEW.extratags, NEW.calculated_country_code) INTO NEW.wikipedia,NEW.importance;
+ -- Use the maximum importance if a one could be computed from the linked object.
+ IF linked_importance is not null AND
+ (NEW.importance is null or NEW.importance < linked_importance) THEN
+ NEW.importance = linked_importance;
END IF;
+
-- Still null? how about looking it up by the node id
IF NEW.importance IS NULL THEN
- select language||':'||title,importance from wikipedia_article where osm_type = 'N'::char(1) and osm_id = linked_node_id order by importance desc limit 1 INTO NEW.wikipedia,NEW.importance;
+ select language||':'||title,importance from wikipedia_article where osm_type = 'N' and osm_id = linked_node_id order by importance desc limit 1 INTO NEW.wikipedia,NEW.importance;
END IF;
END IF;
-- convert isin to array of tokenids
isin_tokens := '{}'::int[];
- IF NEW.isin IS NOT NULL THEN
- isin := regexp_split_to_array(NEW.isin, E'[;,]');
+ IF NEW.address IS NOT NULL THEN
+ isin := avals(NEW.address);
IF array_upper(isin, 1) IS NOT NULL THEN
FOR i IN 1..array_upper(isin, 1) LOOP
address_street_word_id := get_name_id(make_standard_name(isin[i]));
-- %NOTIGERDATA% IF 0 THEN
-- for the USA we have an additional address table. Merge in zip codes from there too
- IF NEW.rank_search = 26 AND NEW.calculated_country_code = 'us' THEN
+ IF NEW.rank_search = 26 AND NEW.country_code = 'us' THEN
FOR location IN SELECT distinct postcode from location_property_tiger where parent_place_id = NEW.place_id LOOP
address_street_word_id := get_name_id(make_standard_name(location.postcode));
nameaddress_vector := array_merge(nameaddress_vector, ARRAY[address_street_word_id]);
-- added ourself as address already
address_havelevel[NEW.rank_address] := true;
-- RAISE WARNING ' getNearFeatures(%,''%'',%,''%'')',NEW.partition, place_centroid, search_maxrank, isin_tokens;
- FOR location IN SELECT * from getNearFeatures(NEW.partition, place_centroid, search_maxrank, isin_tokens) LOOP
+ FOR location IN
+ SELECT * from getNearFeatures(NEW.partition,
+ CASE WHEN NEW.rank_search >= 26
+ AND NEW.rank_search < 30
+ THEN NEW.geometry
+ ELSE place_centroid END,
+ search_maxrank, isin_tokens)
+ LOOP
--RAISE WARNING ' AREA: %',location;
IF location.rank_search > 4 THEN
nameaddress_vector := array_merge(nameaddress_vector, location.keywords::integer[]);
END IF;
- INSERT INTO place_addressline VALUES (NEW.place_id, location.place_id, true, location_isaddress, location.distance, location.rank_address);
+ INSERT INTO place_addressline (place_id, address_place_id, fromarea, isaddress, distance, cached_rank_address)
+ VALUES (NEW.place_id, location.place_id, true, location_isaddress, location.distance, location.rank_address);
IF location_isaddress THEN
IF location.rank_search > 4 THEN
nameaddress_vector := array_merge(nameaddress_vector, location.keywords::integer[]);
- INSERT INTO place_addressline VALUES (NEW.place_id, location.place_id, false, NOT address_havelevel[location.rank_address], location.distance, location.rank_address);
+ INSERT INTO place_addressline (place_id, address_place_id, fromarea, isaddress, distance, cached_rank_address)
+ VALUES (NEW.place_id, location.place_id, false, NOT address_havelevel[location.rank_address], location.distance, location.rank_address);
address_havelevel[location.rank_address] := true;
IF location.rank_address > parent_place_id_rank THEN
-- Add it to the list of search terms
nameaddress_vector := array_merge(nameaddress_vector, location.keywords::integer[]);
- INSERT INTO place_addressline VALUES (NEW.place_id, location.place_id, true, false, location.distance, location.rank_address);
+ INSERT INTO place_addressline (place_id, address_place_id, fromarea, isaddress, distance, cached_rank_address)
+ VALUES (NEW.place_id, location.place_id, true, false, location.distance, location.rank_address);
END IF;
IF NEW.name IS NOT NULL THEN
IF NEW.rank_search <= 25 and NEW.rank_address > 0 THEN
- result := add_location(NEW.place_id, NEW.calculated_country_code, NEW.partition, name_vector, NEW.rank_search, NEW.rank_address, NEW.geometry);
+ result := add_location(NEW.place_id, NEW.country_code, NEW.partition, name_vector, NEW.rank_search, NEW.rank_address, NEW.geometry);
END IF;
IF NEW.rank_search between 26 and 27 and NEW.class = 'highway' THEN
- result := insertLocationRoad(NEW.partition, NEW.place_id, NEW.calculated_country_code, NEW.geometry);
+ result := insertLocationRoad(NEW.partition, NEW.place_id, NEW.country_code, NEW.geometry);
END IF;
- result := insertSearchName(NEW.partition, NEW.place_id, NEW.calculated_country_code, name_vector, nameaddress_vector, NEW.rank_search, NEW.rank_address, NEW.importance, place_centroid, NEW.geometry);
+ result := insertSearchName(NEW.partition, NEW.place_id, NEW.country_code, name_vector, nameaddress_vector, NEW.rank_search, NEW.rank_address, NEW.importance, place_centroid, NEW.geometry);
END IF;
IF st_area(OLD.geometry) > 2 and st_isvalid(OLD.geometry) THEN
SELECT bool_or(not (rank_address = 0 or rank_address > 26)) as ranked FROM placex WHERE osm_type = OLD.osm_type and osm_id = OLD.osm_id and class = OLD.class and type = OLD.type INTO has_rank;
IF has_rank THEN
- insert into import_polygon_delete values (OLD.osm_type,OLD.osm_id,OLD.class,OLD.type);
+ insert into import_polygon_delete (osm_type, osm_id, class, type) values (OLD.osm_type,OLD.osm_id,OLD.class,OLD.type);
RETURN NULL;
END IF;
END IF;
--DEBUG: RAISE WARNING 'place_insert: % % % % %',NEW.osm_type,NEW.osm_id,NEW.class,NEW.type,st_area(NEW.geometry);
-- filter wrong tupels
IF ST_IsEmpty(NEW.geometry) OR NOT ST_IsValid(NEW.geometry) OR ST_X(ST_Centroid(NEW.geometry))::text in ('NaN','Infinity','-Infinity') OR ST_Y(ST_Centroid(NEW.geometry))::text in ('NaN','Infinity','-Infinity') THEN
- INSERT INTO import_polygon_error values (NEW.osm_type, NEW.osm_id, NEW.class, NEW.type, NEW.name, NEW.country_code,
- now(), ST_IsValidReason(NEW.geometry), null, NEW.geometry);
+ INSERT INTO import_polygon_error (osm_type, osm_id, class, type, name, country_code, updated, errormessage, prevgeometry, newgeometry)
+ VALUES (NEW.osm_type, NEW.osm_id, NEW.class, NEW.type, NEW.name, NEW.address->'country', now(), ST_IsValidReason(NEW.geometry), null, NEW.geometry);
-- RAISE WARNING 'Invalid Geometry: % % % %',NEW.osm_type,NEW.osm_id,NEW.class,NEW.type;
RETURN null;
END IF;
- -- decide, whether it is an osm interpolation line => insert_osmline, or else just insert into placex
+ -- decide, whether it is an osm interpolation line => insert intoosmline, or else just placex
IF NEW.class='place' and NEW.type='houses' and NEW.osm_type='W' and ST_GeometryType(NEW.geometry) = 'ST_LineString' THEN
-- Have we already done this place?
select * from place where osm_type = NEW.osm_type and osm_id = NEW.osm_id and class = NEW.class and type = NEW.type INTO existing;
update placex p set indexed_status = 2
from planet_osm_ways w
where w.id = NEW.osm_id and p.osm_type = 'N' and p.osm_id = any(w.nodes);
- -- insert new line into location_property_osmline, use function insert_osmline
+
+
+ INSERT INTO location_property_osmline (osm_id, address, linegeo)
+ VALUES (NEW.osm_id, NEW.address, NEW.geometry);
IF existing.osm_type IS NULL THEN
- i = insert_osmline(NEW.osm_id, NEW.housenumber, NEW.street, NEW.addr_place, NEW.postcode, NEW.country_code, NEW.geometry);
return NEW;
END IF;
- IF coalesce(existing.housenumber, '') != coalesce(NEW.housenumber, '')
- OR coalesce(existing.street, '') != coalesce(NEW.street, '')
- OR coalesce(existing.addr_place, '') != coalesce(NEW.addr_place, '')
- OR coalesce(existing.isin, '') != coalesce(NEW.isin, '')
- OR coalesce(existing.postcode, '') != coalesce(NEW.postcode, '')
- OR coalesce(existing.country_code, '') != coalesce(NEW.country_code, '')
+ IF coalesce(existing.address, ''::hstore) != coalesce(NEW.address, ''::hstore)
+ OR (coalesce(existing.extratags, ''::hstore) != coalesce(NEW.extratags, ''::hstore))
OR existing.geometry::text != NEW.geometry::text
THEN
update place set
name = NEW.name,
- housenumber = NEW.housenumber,
- street = NEW.street,
- addr_place = NEW.addr_place,
- isin = NEW.isin,
- postcode = NEW.postcode,
- country_code = NEW.country_code,
+ address = NEW.address,
extratags = NEW.extratags,
admin_level = NEW.admin_level,
geometry = NEW.geometry
where osm_type = NEW.osm_type and osm_id = NEW.osm_id and class = NEW.class and type = NEW.type;
-
- i = insert_osmline(NEW.osm_id, NEW.housenumber, NEW.street, NEW.addr_place, NEW.postcode, NEW.country_code, NEW.geometry);
END IF;
RETURN NULL;
ELSE -- insert to placex
-- Patch in additional country names
- IF NEW.admin_level = 2 AND NEW.type = 'administrative' AND NEW.country_code is not null THEN
- select coalesce(country_name.name || NEW.name,NEW.name) from country_name where country_name.country_code = lower(NEW.country_code) INTO NEW.name;
+ IF NEW.admin_level = 2 AND NEW.type = 'administrative'
+ AND NEW.address is not NULL AND NEW.address ? 'country' THEN
+ SELECT name FROM country_name WHERE country_code = lower(NEW.address->'country') INTO existing;
+ IF existing.name IS NOT NULL THEN
+ NEW.name = existing.name || NEW.name;
+ END IF;
END IF;
-- Have we already done this place?
AND ST_GeometryType(NEW.geometry) in ('ST_Polygon','ST_MultiPolygon')
AND st_area(NEW.geometry) < st_area(existing.geometry)*0.5
THEN
- INSERT INTO import_polygon_error values (NEW.osm_type, NEW.osm_id, NEW.class, NEW.type, NEW.name, NEW.country_code, now(),
+ INSERT INTO import_polygon_error (osm_type, osm_id, class, type, name, country_code, updated, errormessage, prevgeometry, newgeometry)
+ VALUES (NEW.osm_type, NEW.osm_id, NEW.class, NEW.type, NEW.name, NEW.address->'country', now(),
'Area reduced from '||st_area(existing.geometry)||' to '||st_area(NEW.geometry), existing.geometry, NEW.geometry);
RETURN null;
END IF;
END IF;
-- No - process it as a new insertion (hopefully of low rank or it will be slow)
- insert into placex (osm_type, osm_id, class, type, name, admin_level, housenumber,
- street, addr_place, isin, postcode, country_code, extratags, geometry)
- values (NEW.osm_type
- ,NEW.osm_id
- ,NEW.class
- ,NEW.type
- ,NEW.name
- ,NEW.admin_level
- ,NEW.housenumber
- ,NEW.street
- ,NEW.addr_place
- ,NEW.isin
- ,NEW.postcode
- ,NEW.country_code
- ,NEW.extratags
- ,NEW.geometry
- );
+ insert into placex (osm_type, osm_id, class, type, name,
+ admin_level, address, extratags, geometry)
+ values (NEW.osm_type, NEW.osm_id, NEW.class, NEW.type, NEW.name,
+ NEW.admin_level, NEW.address, NEW.extratags, NEW.geometry);
--DEBUG: RAISE WARNING 'insert done % % % % %',NEW.osm_type,NEW.osm_id,NEW.class,NEW.type,NEW.name;
RETURN NEW;
END IF;
- -- Various ways to do the update
-
- -- Debug, what's changed?
- IF FALSE THEN
- IF coalesce(existing.name::text, '') != coalesce(NEW.name::text, '') THEN
- RAISE WARNING 'update details, name: % % % %',NEW.osm_type,NEW.osm_id,existing.name::text,NEW.name::text;
- END IF;
- IF coalesce(existing.housenumber, '') != coalesce(NEW.housenumber, '') THEN
- RAISE WARNING 'update details, housenumber: % % % %',NEW.osm_type,NEW.osm_id,existing.housenumber,NEW.housenumber;
- END IF;
- IF coalesce(existing.street, '') != coalesce(NEW.street, '') THEN
- RAISE WARNING 'update details, street: % % % %',NEW.osm_type,NEW.osm_id,existing.street,NEW.street;
- END IF;
- IF coalesce(existing.addr_place, '') != coalesce(NEW.addr_place, '') THEN
- RAISE WARNING 'update details, street: % % % %',NEW.osm_type,NEW.osm_id,existing.addr_place,NEW.addr_place;
- END IF;
- IF coalesce(existing.isin, '') != coalesce(NEW.isin, '') THEN
- RAISE WARNING 'update details, isin: % % % %',NEW.osm_type,NEW.osm_id,existing.isin,NEW.isin;
- END IF;
- IF coalesce(existing.postcode, '') != coalesce(NEW.postcode, '') THEN
- RAISE WARNING 'update details, postcode: % % % %',NEW.osm_type,NEW.osm_id,existing.postcode,NEW.postcode;
- END IF;
- IF coalesce(existing.country_code, '') != coalesce(NEW.country_code, '') THEN
- RAISE WARNING 'update details, country_code: % % % %',NEW.osm_type,NEW.osm_id,existing.country_code,NEW.country_code;
- END IF;
- END IF;
-
-- Special case for polygon shape changes because they tend to be large and we can be a bit clever about how we handle them
IF existing.geometry::text != NEW.geometry::text
AND ST_GeometryType(existing.geometry) in ('ST_Polygon','ST_MultiPolygon')
IF coalesce(existing.name::text, '') != coalesce(NEW.name::text, '')
OR coalesce(existing.extratags::text, '') != coalesce(NEW.extratags::text, '')
- OR coalesce(existing.housenumber, '') != coalesce(NEW.housenumber, '')
- OR coalesce(existing.street, '') != coalesce(NEW.street, '')
- OR coalesce(existing.addr_place, '') != coalesce(NEW.addr_place, '')
- OR coalesce(existing.isin, '') != coalesce(NEW.isin, '')
- OR coalesce(existing.postcode, '') != coalesce(NEW.postcode, '')
- OR coalesce(existing.country_code, '') != coalesce(NEW.country_code, '')
+ OR coalesce(existing.address, ''::hstore) != coalesce(NEW.address, ''::hstore)
OR coalesce(existing.admin_level, 15) != coalesce(NEW.admin_level, 15)
OR existing.geometry::text != NEW.geometry::text
THEN
update place set
name = NEW.name,
- housenumber = NEW.housenumber,
- street = NEW.street,
- addr_place = NEW.addr_place,
- isin = NEW.isin,
- postcode = NEW.postcode,
- country_code = NEW.country_code,
+ address = NEW.address,
extratags = NEW.extratags,
admin_level = NEW.admin_level,
geometry = NEW.geometry
where osm_type = NEW.osm_type and osm_id = NEW.osm_id and class = NEW.class and type = NEW.type;
-
+
IF NEW.class in ('place','boundary') AND NEW.type in ('postcode','postal_code') THEN
- IF NEW.postcode IS NULL THEN
+ IF NEW.address is NULL OR NOT NEW.address ? 'postcode' THEN
-- postcode was deleted, no longer retain in placex
DELETE FROM placex where place_id = existingplacex.place_id;
RETURN NULL;
END IF;
- NEW.name := hstore('ref', NEW.postcode);
+ NEW.name := hstore('ref', NEW.address->'postcode');
END IF;
-
+
update placex set
name = NEW.name,
- housenumber = NEW.housenumber,
- street = NEW.street,
- addr_place = NEW.addr_place,
- isin = NEW.isin,
- postcode = NEW.postcode,
- country_code = NEW.country_code,
+ address = NEW.address,
parent_place_id = null,
extratags = NEW.extratags,
- admin_level = CASE WHEN NEW.admin_level > 15 THEN 15 ELSE NEW.admin_level END,
- indexed_status = 2,
+ admin_level = NEW.admin_level,
+ indexed_status = 2,
geometry = NEW.geometry
where place_id = existingplacex.place_id;
-
+
-- if a node(=>house), which is part of a interpolation line, changes (e.g. the street attribute) => mark this line for reparenting
-- (already here, because interpolation lines are reindexed before nodes, so in the second call it would be too late)
IF NEW.osm_type='N' and NEW.class='place' and NEW.type='house' THEN
hadcountry BOOLEAN;
BEGIN
-- first query osmline (interpolation lines)
- select parent_place_id, calculated_country_code, 30, postcode, null, 'place', 'house' from location_property_osmline
+ select parent_place_id, country_code, 30, postcode, null, 'place', 'house' from location_property_osmline
WHERE place_id = in_place_id AND in_housenumber>=startnumber AND in_housenumber <= endnumber
INTO for_place_id,searchcountrycode, searchrankaddress, searchpostcode, searchhousename, searchclass, searchtype;
IF for_place_id IS NOT NULL THEN
-- %NOAUXDATA% END IF;
IF for_place_id IS NULL THEN
- select parent_place_id, calculated_country_code, housenumber, rank_search, postcode, name, class, type from placex
- WHERE place_id = in_place_id and rank_address = 30
+ select parent_place_id, country_code, housenumber, rank_search, postcode, name, class, type from placex
+ WHERE place_id = in_place_id and rank_search > 27
INTO for_place_id, searchcountrycode, searchhousenumber, searchrankaddress, searchpostcode, searchhousename, searchclass, searchtype;
END IF;
IF for_place_id IS NULL THEN
- select coalesce(linked_place_id, place_id), calculated_country_code,
+ select coalesce(linked_place_id, place_id), country_code,
housenumber, rank_search, postcode, null
from placex where place_id = in_place_id
INTO for_place_id, searchcountrycode, searchhousenumber, searchrankaddress, searchpostcode, searchhousename;
CASE WHEN class = 'place' and type = 'postcode' THEN hstore('name', postcode) ELSE name END as name,
class, type, admin_level, true as fromarea, true as isaddress,
CASE WHEN rank_address = 0 THEN 100 WHEN rank_address = 11 THEN 5 ELSE rank_address END as rank_address,
- 0 as distance, calculated_country_code, postcode
+ 0 as distance, country_code, postcode
from placex
where place_id = for_place_id
LOOP
--RAISE WARNING '%',location;
- IF searchcountrycode IS NULL AND location.calculated_country_code IS NOT NULL THEN
- searchcountrycode := location.calculated_country_code;
+ IF searchcountrycode IS NULL AND location.country_code IS NOT NULL THEN
+ searchcountrycode := location.country_code;
END IF;
IF searchpostcode IS NOT NULL and location.type = 'postcode' THEN
location.isaddress := FALSE;
CASE WHEN extratags ? 'place' THEN extratags->'place' ELSE type END as type,
admin_level, fromarea, isaddress,
CASE WHEN address_place_id = for_place_id AND rank_address = 0 THEN 100 WHEN rank_address = 11 THEN 5 ELSE rank_address END as rank_address,
- distance,calculated_country_code,postcode
+ distance,country_code,postcode
from place_addressline join placex on (address_place_id = placex.place_id)
where place_addressline.place_id = for_place_id
and (cached_rank_address > 0 AND cached_rank_address < searchrankaddress)
and address_place_id != for_place_id
- and (placex.calculated_country_code IS NULL OR searchcountrycode IS NULL OR placex.calculated_country_code = searchcountrycode)
+ and (placex.country_code IS NULL OR searchcountrycode IS NULL OR placex.country_code = searchcountrycode)
order by rank_address desc,isaddress desc,fromarea desc,distance asc,rank_search desc
LOOP
--RAISE WARNING '%',location;
- IF searchcountrycode IS NULL AND location.calculated_country_code IS NOT NULL THEN
- searchcountrycode := location.calculated_country_code;
+ IF searchcountrycode IS NULL AND location.country_code IS NOT NULL THEN
+ searchcountrycode := location.country_code;
END IF;
IF searchpostcode IS NOT NULL and location.type = 'postcode' THEN
location.isaddress := FALSE;
LANGUAGE plpgsql;
-CREATE OR REPLACE FUNCTION update_place(search_place_id BIGINT) RETURNS BOOLEAN
- AS $$
-DECLARE
- numfeatures integer;
-BEGIN
- update placex set
- name = place.name,
- housenumber = place.housenumber,
- street = place.street,
- addr_place = place.addr_place,
- isin = place.isin,
- postcode = place.postcode,
- country_code = place.country_code,
- parent_place_id = null
- from place
- where placex.place_id = search_place_id
- and place.osm_type = placex.osm_type and place.osm_id = placex.osm_id
- and place.class = placex.class and place.type = placex.type;
- update placex set indexed_status = 2 where place_id = search_place_id;
- update placex set indexed_status = 0 where place_id = search_place_id;
- return true;
-END;
-$$
-LANGUAGE plpgsql;
-
CREATE OR REPLACE FUNCTION get_searchrank_label(rank INTEGER) RETURNS TEXT
AS $$
DECLARE
IF out_parent_place_id IS NULL THEN
FOR location IN SELECT place_id FROM getNearestRoadFeature(out_partition, place_centroid) LOOP
out_parent_place_id := location.place_id;
- END LOOP;
+ END LOOP;
END IF;
out_postcode := in_postcode;
IF ST_GeometryType(placegeom) in ('ST_Polygon','ST_MultiPolygon') THEN
FOR geom IN select split_geometry(placegeom) FROM placex WHERE place_id = placeid LOOP
update placex set indexed_status = 2 where (st_covers(geom, placex.geometry) OR ST_Intersects(geom, placex.geometry))
- AND rank_search > rank and indexed_status = 0 and ST_geometrytype(placex.geometry) = 'ST_Point' and (rank_search < 28 or name is not null or (rank >= 16 and addr_place is not null));
+ AND rank_search > rank and indexed_status = 0 and ST_geometrytype(placex.geometry) = 'ST_Point' and (rank_search < 28 or name is not null or (rank >= 16 and address > 'place'));
update placex set indexed_status = 2 where (st_covers(geom, placex.geometry) OR ST_Intersects(geom, placex.geometry))
- AND rank_search > rank and indexed_status = 0 and ST_geometrytype(placex.geometry) != 'ST_Point' and (rank_search < 28 or name is not null or (rank >= 16 and addr_place is not null));
+ AND rank_search > rank and indexed_status = 0 and ST_geometrytype(placex.geometry) != 'ST_Point' and (rank_search < 28 or name is not null or (rank >= 16 and address ? 'place'));
END LOOP;
ELSE
diameter := 0;
update placex set indexed_status = 2 where indexed_status = 0 and rank_search > rank and ST_DWithin(placex.geometry, placegeom, diameter);
ELSEIF rank >= 16 THEN
-- up to rank 16, street-less addresses may need reparenting
- update placex set indexed_status = 2 where indexed_status = 0 and rank_search > rank and ST_DWithin(placex.geometry, placegeom, diameter) and (rank_search < 28 or name is not null or addr_place is not null);
+ update placex set indexed_status = 2 where indexed_status = 0 and rank_search > rank and ST_DWithin(placex.geometry, placegeom, diameter) and (rank_search < 28 or name is not null or address ? 'place');
ELSE
-- for all other places the search terms may change as well
update placex set indexed_status = 2 where indexed_status = 0 and rank_search > rank and ST_DWithin(placex.geometry, placegeom, diameter) and (rank_search < 28 or name is not null);
projects / nominatim.git / blobdiff