replace pylint with flake8 everywhere

[nominatim.git] / docs / admin / Installation.md

diff --git a/docs/admin/Installation.md b/docs/admin/Installation.md
index 2ae594baadc4e8cf4a36a1ab8e09baf44dbc5239..78062908c9ca230179023a960008a6f04fd9deb1 100644 (file)
--- a/docs/admin/Installation.md
+++ b/docs/admin/Installation.md
@@ -4,10 +4,8 @@ This page contains generic installation instructions for Nominatim and its
 prerequisites. There are also step-by-step instructions available for
 the following operating systems:
 
 prerequisites. There are also step-by-step instructions available for
 the following operating systems:
 

-  * [Ubuntu 20.04](../appendix/Install-on-Ubuntu-20.md)
-  * [Ubuntu 18.04](../appendix/Install-on-Ubuntu-18.md)
-  * [CentOS 8](../appendix/Install-on-Centos-8.md)
-  * [CentOS 7.2](../appendix/Install-on-Centos-7.md)
+  * [Ubuntu 24.04](Install-on-Ubuntu-24.md)
+  * [Ubuntu 22.04](Install-on-Ubuntu-22.md)

 
 These OS-specific instructions can also be found in executable form
 in the `vagrant/` directory.
 
 These OS-specific instructions can also be found in executable form
 in the `vagrant/` directory.


@@ -25,57 +23,70 @@ and can't offer support.
 ### Software
 
 !!! Warning
 ### Software
 
 !!! Warning

-    For larger installations you **must have** PostgreSQL 11+ and Postgis 3+
+    For larger installations you **must have** PostgreSQL 11+ and PostGIS 3+

     otherwise import and queries will be slow to the point of being unusable.
     otherwise import and queries will be slow to the point of being unusable.

-
-For compiling:
-
-  * [cmake](https://cmake.org/)
-  * [expat](https://libexpat.github.io/)
-  * [proj](https://proj.org/)
-  * [bzip2](http://www.bzip.org/)
-  * [zlib](https://www.zlib.net/)
-  * [ICU](http://site.icu-project.org/)
-  * [Boost libraries](https://www.boost.org/), including system and filesystem
-  * PostgreSQL client libraries
-  * a recent C++ compiler (gcc 5+ or Clang 3.8+)
+    Query performance has marked improvements with PostgreSQL 13+ and PostGIS 3.2+.

 
 For running Nominatim:
 
 
 For running Nominatim:
 

-  * [PostgreSQL](https://www.postgresql.org) (9.5+ will work, 11+ strongly recommended)
+  * [PostgreSQL](https://www.postgresql.org) (9.6+ will work, 11+ strongly recommended)

   * [PostGIS](https://postgis.net) (2.2+ will work, 3.0+ strongly recommended)
   * [PostGIS](https://postgis.net) (2.2+ will work, 3.0+ strongly recommended)

-  * [Python 3](https://www.python.org/) (3.6+)
-  * [Psycopg2](https://www.psycopg.org) (2.7+)
+  * [osm2pgsql](https://osm2pgsql.org) (1.8+, optional when building with CMake)
+  * [Python 3](https://www.python.org/) (3.7+)
+
+Furthermore the following Python libraries are required:
+
+  * [Psycopg3](https://www.psycopg.org)

   * [Python Dotenv](https://github.com/theskumar/python-dotenv)
   * [psutil](https://github.com/giampaolo/psutil)
   * [Jinja2](https://palletsprojects.com/p/jinja/)
   * [PyICU](https://pypi.org/project/PyICU/)
   * [PyYaml](https://pyyaml.org/) (5.1+)
   * [datrie](https://github.com/pytries/datrie)
   * [Python Dotenv](https://github.com/theskumar/python-dotenv)
   * [psutil](https://github.com/giampaolo/psutil)
   * [Jinja2](https://palletsprojects.com/p/jinja/)
   * [PyICU](https://pypi.org/project/PyICU/)
   * [PyYaml](https://pyyaml.org/) (5.1+)
   * [datrie](https://github.com/pytries/datrie)

-  * [PHP](https://php.net) (7.0 or later)
-  * PHP-pgsql
-  * PHP-intl (bundled with PHP)
-  * PHP-cgi (for running queries from the command line)
+
+These will be installed automatically when using pip installation.
+
+When using legacy CMake-based installation:
+
+  * [cmake](https://cmake.org/)
+  * [expat](https://libexpat.github.io/)
+  * [proj](https://proj.org/)
+  * [bzip2](http://www.bzip.org/)
+  * [zlib](https://www.zlib.net/)
+  * [ICU](http://site.icu-project.org/)
+  * [nlohmann/json](https://json.nlohmann.me/)
+  * [Boost libraries](https://www.boost.org/), including system and file system
+  * PostgreSQL client libraries
+  * a recent C++ compiler (gcc 5+ or Clang 3.8+)

 
 For running continuous updates:
 
   * [pyosmium](https://osmcode.org/pyosmium/)
 
 
 For running continuous updates:
 
   * [pyosmium](https://osmcode.org/pyosmium/)
 

+For running the Python frontend:
+
+  * [SQLAlchemy](https://www.sqlalchemy.org/) (1.4.31+ with greenlet support)
+  * [asyncpg](https://magicstack.github.io/asyncpg) (0.8+, only when using SQLAlchemy < 2.0)
+  * one of the following web frameworks:
+    * [falcon](https://falconframework.org/) (3.0+)
+    * [starlette](https://www.starlette.io/)
+  * [uvicorn](https://www.uvicorn.org/)
+

 For dependencies for running tests and building documentation, see
 the [Development section](../develop/Development-Environment.md).
 
 ### Hardware
 
 A minimum of 2GB of RAM is required or installation will fail. For a full
 For dependencies for running tests and building documentation, see
 the [Development section](../develop/Development-Environment.md).
 
 ### Hardware
 
 A minimum of 2GB of RAM is required or installation will fail. For a full

-planet import 64GB of RAM or more are strongly recommended. Do not report
+planet import 128GB of RAM or more are strongly recommended. Do not report

 out of memory problems if you have less than 64GB RAM.
 
 out of memory problems if you have less than 64GB RAM.
 

-For a full planet install you will need at least 900GB of hard disk space.
+For a full planet install you will need at least 1TB of hard disk space.

 Take into account that the OSM database is growing fast.
 Fast disks are essential. Using NVME disks is recommended.
 
 Even on a well configured machine the import of a full planet takes
 Take into account that the OSM database is growing fast.
 Fast disks are essential. Using NVME disks is recommended.
 
 Even on a well configured machine the import of a full planet takes

-around 2 days. On traditional spinning disks, 7-8 days are more realistic.
+around 2.5 days. When using traditional SSDs, 4-5 days are more realistic.

 
 ## Tuning the PostgreSQL database
 
 
 ## Tuning the PostgreSQL database
 


@@ -87,15 +98,16 @@ your `postgresql.conf` file.
     maintenance_work_mem = (10GB)
     autovacuum_work_mem = 2GB
     work_mem = (50MB)
     maintenance_work_mem = (10GB)
     autovacuum_work_mem = 2GB
     work_mem = (50MB)

-    effective_cache_size = (24GB)

     synchronous_commit = off
     synchronous_commit = off

-    checkpoint_segments = 100 # only for postgresql <= 9.4
-    max_wal_size = 1GB # postgresql > 9.4
-    checkpoint_timeout = 10min
+    max_wal_size = 1GB
+    checkpoint_timeout = 60min

     checkpoint_completion_target = 0.9
     checkpoint_completion_target = 0.9

+    random_page_cost = 1.0
+    wal_level = minimal
+    max_wal_senders = 0

 
 The numbers in brackets behind some parameters seem to work fine for
 
 The numbers in brackets behind some parameters seem to work fine for

-64GB RAM machine. Adjust to your setup. A higher number for `max_wal_size`
+128GB RAM machine. Adjust to your setup. A higher number for `max_wal_size`

 means that PostgreSQL needs to run checkpoints less often but it does require
 the additional space on your disk.
 
 means that PostgreSQL needs to run checkpoints less often but it does require
 the additional space on your disk.
 


@@ -108,15 +120,6 @@ you might consider setting:
 and even reduce `autovacuum_work_mem` further. This will reduce the amount
 of memory that autovacuum takes away from the import process.
 
 and even reduce `autovacuum_work_mem` further. This will reduce the amount
 of memory that autovacuum takes away from the import process.
 

-For the initial import, you should also set:
-
-    fsync = off
-    full_page_writes = off
-
-Don't forget to reenable them after the initial import or you risk database
-corruption.
-
-

 ## Downloading and building Nominatim
 
 ### Downloading the latest release
 ## Downloading and building Nominatim
 
 ### Downloading the latest release


@@ -130,17 +133,34 @@ If you want to install latest development version from github, make sure to
 also check out the osm2pgsql subproject:
 
 ```
 also check out the osm2pgsql subproject:
 
 ```

-git clone --recursive git://github.com/openstreetmap/Nominatim.git
+git clone --recursive https://github.com/openstreetmap/Nominatim.git

 ```
 
 The development version does not include the country grid. Download it separately:
 
 ```
 ```
 
 The development version does not include the country grid. Download it separately:
 
 ```

-wget -O Nominatim/data/country_osm_grid.sql.gz https://www.nominatim.org/data/country_grid.sql.gz
+wget -O Nominatim/data/country_osm_grid.sql.gz https://nominatim.org/data/country_grid.sql.gz

 ```
 
 ### Building Nominatim
 
 ```
 
 ### Building Nominatim
 

+#### Building the latest development version with pip
+
+Nominatim is easiest to run from its own virtual environment. To create one, run:
+
+    sudo apt-get install virtualenv
+    virtualenv /srv/nominatim-venv
+
+To install Nominatim directly from the source tree into the virtual environment, run:
+
+    /srv/nominatim-venv/bin/pip install packaging/nominatim-{db,api}
+
+#### Building in legacy CMake mode
+
+!!! warning
+    Installing Nominatim through CMake is now deprecated. The infrastructure
+    will be removed in Nominatim 5.0. Please switch to pip installation.
+

 The code must be built in a separate directory. Create the directory and
 change into it.
 
 The code must be built in a separate directory. Create the directory and
 change into it.