Merge pull request #3367 from lonvia/address-word-counts

[nominatim.git] / docs / admin / Installation.md

diff --git a/docs/admin/Installation.md b/docs/admin/Installation.md
index 98cfe573c6018fb088b22726d566a7da38819dad..ef6bd08112532a07c00e1c1577f6a1fc850d4873 100644 (file)
--- a/docs/admin/Installation.md
+++ b/docs/admin/Installation.md
@@ -4,10 +4,8 @@ This page contains generic installation instructions for Nominatim and its
 prerequisites. There are also step-by-step instructions available for
 the following operating systems:
 
 prerequisites. There are also step-by-step instructions available for
 the following operating systems:
 

+  * [Ubuntu 22.04](../appendix/Install-on-Ubuntu-22.md)

   * [Ubuntu 20.04](../appendix/Install-on-Ubuntu-20.md)
   * [Ubuntu 20.04](../appendix/Install-on-Ubuntu-20.md)

-  * [Ubuntu 18.04](../appendix/Install-on-Ubuntu-18.md)
-  * [CentOS 8](../appendix/Install-on-Centos-8.md)
-  * [CentOS 7.2](../appendix/Install-on-Centos-7.md)

 
 These OS-specific instructions can also be found in executable form
 in the `vagrant/` directory.
 
 These OS-specific instructions can also be found in executable form
 in the `vagrant/` directory.


@@ -17,12 +15,18 @@ and can't offer support.
 
   * [Docker](https://github.com/mediagis/nominatim-docker)
   * [Docker on Kubernetes](https://github.com/peter-evans/nominatim-k8s)
 
   * [Docker](https://github.com/mediagis/nominatim-docker)
   * [Docker on Kubernetes](https://github.com/peter-evans/nominatim-k8s)

+  * [Kubernetes with Helm](https://github.com/robjuz/helm-charts/blob/master/charts/nominatim/README.md)

   * [Ansible](https://github.com/synthesio/infra-ansible-nominatim)
 
 ## Prerequisites
 
 ### Software
 
   * [Ansible](https://github.com/synthesio/infra-ansible-nominatim)
 
 ## Prerequisites
 
 ### Software
 

+!!! Warning
+    For larger installations you **must have** PostgreSQL 11+ and PostGIS 3+
+    otherwise import and queries will be slow to the point of being unusable.
+    Query performance has marked improvements with PostgreSQL 13+ and PostGIS 3.2+.
+

 For compiling:
 
   * [cmake](https://cmake.org/)
 For compiling:
 
   * [cmake](https://cmake.org/)


@@ -30,51 +34,62 @@ For compiling:
   * [proj](https://proj.org/)
   * [bzip2](http://www.bzip.org/)
   * [zlib](https://www.zlib.net/)
   * [proj](https://proj.org/)
   * [bzip2](http://www.bzip.org/)
   * [zlib](https://www.zlib.net/)

+  * [ICU](http://site.icu-project.org/)
+  * [nlohmann/json](https://json.nlohmann.me/)

   * [Boost libraries](https://www.boost.org/), including system and filesystem
   * PostgreSQL client libraries
   * a recent C++ compiler (gcc 5+ or Clang 3.8+)
 
 For running Nominatim:
 
   * [Boost libraries](https://www.boost.org/), including system and filesystem
   * PostgreSQL client libraries
   * a recent C++ compiler (gcc 5+ or Clang 3.8+)
 
 For running Nominatim:
 

-  * [PostgreSQL](https://www.postgresql.org) (9.3 - 11)
-  * [PostGIS](https://postgis.org) (2.2 - 2.5)
-  * [Python 3](https://www.python.org/)
-  * [Psycopg2](https://initd.org/psycopg)
-  * [PHP](https://php.net) (7.0 or later)
-  * PHP-pgsql
-  * PHP-intl (bundled with PHP)
-  * a webserver (apache or nginx are recommended)
-
-!!! danger "Important"
-    Postgresql 12+ and Postgis 3.0+ are known to cause performance issues. They are
-    not recommended for a production installation at the moment.
+  * [PostgreSQL](https://www.postgresql.org) (9.6+ will work, 11+ strongly recommended)
+  * [PostGIS](https://postgis.net) (2.2+ will work, 3.0+ strongly recommended)
+  * [Python 3](https://www.python.org/) (3.7+)
+  * [Psycopg2](https://www.psycopg.org) (2.7+)
+  * [Python Dotenv](https://github.com/theskumar/python-dotenv)
+  * [psutil](https://github.com/giampaolo/psutil)
+  * [Jinja2](https://palletsprojects.com/p/jinja/)
+  * [SQLAlchemy](https://www.sqlalchemy.org/) (1.4.31+ with greenlet support)
+  * [asyncpg](https://magicstack.github.io/asyncpg) (0.8+)
+  * [PyICU](https://pypi.org/project/PyICU/)
+  * [PyYaml](https://pyyaml.org/) (5.1+)
+  * [datrie](https://github.com/pytries/datrie)

 
 For running continuous updates:
 
 
 For running continuous updates:
 

-  * [pyosmium](https://osmcode.org/pyosmium/) (with Python 3)
+  * [pyosmium](https://osmcode.org/pyosmium/)
+
+For running the Python frontend:
+
+  * one of the following web frameworks:
+    * [falcon](https://falconframework.org/) (3.0+)
+    * [starlette](https://www.starlette.io/)
+  * [uvicorn](https://www.uvicorn.org/)
+
+For running the legacy PHP frontend:
+
+  * [PHP](https://php.net) (7.3+)
+  * PHP-pgsql
+  * PHP-intl (bundled with PHP)

 
 

-For running tests:

 
 

-  * [behave](http://pythonhosted.org/behave/)
-  * [nose](https://nose.readthedocs.io)
-  * [phpunit](https://phpunit.de) >= 7.3
+For dependencies for running tests and building documentation, see
+the [Development section](../develop/Development-Environment.md).

 
 ### Hardware
 
 A minimum of 2GB of RAM is required or installation will fail. For a full
 
 ### Hardware
 
 A minimum of 2GB of RAM is required or installation will fail. For a full

-planet import 64GB of RAM or more are strongly recommended. Do not report
+planet import 128GB of RAM or more are strongly recommended. Do not report

 out of memory problems if you have less than 64GB RAM.
 
 out of memory problems if you have less than 64GB RAM.
 

-For a full planet install you will need at least 800GB of hard disk space
-(take into account that the OSM database is growing fast). SSD disks
-will help considerably to speed up import and queries.
+For a full planet install you will need at least 1TB of hard disk space.
+Take into account that the OSM database is growing fast.
+Fast disks are essential. Using NVME disks is recommended.

 
 Even on a well configured machine the import of a full planet takes
 
 Even on a well configured machine the import of a full planet takes

-at least 2 days. Without SSDs 7-8 days are more realistic.
+around 2 days. When using traditional SSDs, 4-5 days are more realistic.

 
 

-## Setup of the server
-
-### PostgreSQL tuning
+## Tuning the PostgreSQL database

 
 You might want to tune your PostgreSQL installation so that the later steps
 make best use of your hardware. You should tune the following parameters in
 
 You might want to tune your PostgreSQL installation so that the later steps
 make best use of your hardware. You should tune the following parameters in


@@ -86,8 +101,7 @@ your `postgresql.conf` file.
     work_mem = (50MB)
     effective_cache_size = (24GB)
     synchronous_commit = off
     work_mem = (50MB)
     effective_cache_size = (24GB)
     synchronous_commit = off

-    checkpoint_segments = 100 # only for postgresql <= 9.4
-    max_wal_size = 1GB # postgresql > 9.4
+    max_wal_size = 1GB

     checkpoint_timeout = 10min
     checkpoint_completion_target = 0.9
 
     checkpoint_timeout = 10min
     checkpoint_completion_target = 0.9
 


@@ -105,87 +119,65 @@ you might consider setting:
 and even reduce `autovacuum_work_mem` further. This will reduce the amount
 of memory that autovacuum takes away from the import process.
 
 and even reduce `autovacuum_work_mem` further. This will reduce the amount
 of memory that autovacuum takes away from the import process.
 

-For the initial import, you should also set:
-
-    fsync = off
-    full_page_writes = off
-
-Don't forget to reenable them after the initial import or you risk database
-corruption.
-
-
-### Webserver setup
-
-The `website/` directory in the build directory contains the configured
-website. Include the directory into your webbrowser to serve php files
-from there.
+## Downloading and building Nominatim

 
 

-#### Configure for use with Apache
+### Downloading the latest release

 
 

-Make sure your Apache configuration contains the required permissions for the
-directory and create an alias:
+You can download the [latest release from nominatim.org](https://nominatim.org/downloads/).
+The release contains all necessary files. Just unpack it.

 
 

-    <Directory "/srv/nominatim/build/website">
-      Options FollowSymLinks MultiViews
-      AddType text/html   .php
-      DirectoryIndex search.php
-      Require all granted
-    </Directory>
-    Alias /nominatim /srv/nominatim/build/website
+### Downloading the latest development version

 
 

-`/srv/nominatim/build` should be replaced with the location of your
-build directory.
+If you want to install latest development version from github, make sure to
+also check out the osm2pgsql subproject:

 
 

-After making changes in the apache config you need to restart apache.
-The website should now be available on http://localhost/nominatim.
+```
+git clone --recursive https://github.com/openstreetmap/Nominatim.git
+```

 
 

-#### Configure for use with Nginx
+The development version does not include the country grid. Download it separately:

 
 

-Use php-fpm as a deamon for serving PHP cgi. Install php-fpm together with nginx.
+```
+wget -O Nominatim/data/country_osm_grid.sql.gz https://nominatim.org/data/country_grid.sql.gz
+```

 
 

-By default php listens on a network socket. If you want it to listen to a
-Unix socket instead, change the pool configuration (`pool.d/www.conf`) as
-follows:
+### Building Nominatim

 
 

-    ; Comment out the tcp listener and add the unix socket
-    ;listen = 127.0.0.1:9000
-    listen = /var/run/php5-fpm.sock
+The code must be built in a separate directory. Create the directory and
+change into it.

 
 

-    ; Ensure that the daemon runs as the correct user
-    listen.owner = www-data
-    listen.group = www-data
-    listen.mode = 0666
+```
+mkdir build
+cd build
+```

 
 

-Tell nginx that php files are special and to fastcgi_pass to the php-fpm
-unix socket by adding the location definition to the default configuration.
+Nominatim uses cmake and make for building. Assuming that you have created the
+build at the same level as the Nominatim source directory run:

 
 

-    root /srv/nominatim/build/website;
-    index search.php;
-    location / {
-        try_files $uri $uri/ @php;
-    }
+```
+cmake ../Nominatim
+make
+sudo make install
+```

 
 

-    location @php {
-        fastcgi_param SCRIPT_FILENAME "$document_root$uri.php";
-        fastcgi_param PATH_TRANSLATED "$document_root$uri.php";
-        fastcgi_param QUERY_STRING    $args;
-        fastcgi_pass unix:/var/run/php/php7.3-fpm.sock;
-        fastcgi_index index.php;
-        include fastcgi_params;
-    }
+!!! warning
+    The default installation no longer compiles the PostgreSQL module that
+    is needed for the legacy tokenizer from older Nominatim versions. If you
+    are upgrading an older database or want to run the
+    [legacy tokenizer](../customize/Tokenizers.md#legacy-tokenizer) for
+    some other reason, you need to enable the PostgreSQL module via
+    cmake: `cmake -DBUILD_MODULE=on ../Nominatim`. To compile the module
+    you need to have the server development headers for PostgreSQL installed.
+    On Ubuntu/Debian run: `sudo apt install postgresql-server-dev-<postgresql version>`

 
 

-    location ~ [^/]\.php(/|$) {
-        fastcgi_split_path_info ^(.+?\.php)(/.*)$;
-        if (!-f $document_root$fastcgi_script_name) {
-            return 404;
-        }
-        fastcgi_pass unix:/var/run/php7.3-fpm.sock;
-        fastcgi_index search.php;
-        include fastcgi.conf;
-    }

 
 

-Restart the nginx and php5-fpm services and the website should now be available
-at `http://localhost/`.
+Nominatim installs itself into `/usr/local` per default. To choose a different
+installation directory add `-DCMAKE_INSTALL_PREFIX=<install root>` to the
+cmake command. Make sure that the `bin` directory is available in your path
+in that case, e.g.

 
 

+```
+export PATH=<install root>/bin:$PATH
+```

 
 

-Now continue with [importing the database](Import-and-Update.md).
+Now continue with [importing the database](Import.md).