#!/bin/bash
#
+# *Note:* these installation instructions are also available in executable
+# form for use with vagrant under vagrant/install-on-centos-7.sh.
+#
# Installing the Required Software
# ================================
#
-# *Note:* these installation instructions are also available in executable
-# form for use with vagrant in the vagrant/ directory.
-#
# These instructions expect that you have a freshly installed CentOS version 7.
# Make sure all packages are are up-to-date by running:
#
sudo yum update -y
-#
-# Setting up Repositories
-# -----------------------
-#
+
# The standard CentOS repositories don't contain all the required packages,
# you need to enable the EPEL repository as well. To enable it on CentOS,
# install the epel-release RPM by running:
sudo yum install -y epel-release
-#
-# Getting the Software Packages
-# -----------------------------
-#
# Now you can install all packages needed for Nominatim:
sudo yum install -y postgresql-server postgresql-contrib postgresql-devel postgis postgis-utils \
php-pgsql php php-pear php-pear-DB libpqxx-devel proj-epsg \
bzip2-devel proj-devel geos-devel libxml2-devel boost-devel expat-devel zlib-devel
+# If you want to run the test suite, you need to install the following
+# additional packages:
+
+ sudo yum install -y python-pip python-Levenshtein python-psycopg2 \
+ python-numpy php-phpunit-PHPUnit
+ pip install --user --upgrade pip setuptools lettuce==0.2.18 six==1.9 \
+ haversine Shapely pytidylib
+ sudo pear install PHP_CodeSniffer
+
#
# System Configuration
# ====================
#
# **Never, ever run the installation as a root user.** You have been warned.
#
+# Make sure that system servers can read from the home directory:
+
+ chmod a+x $USERHOME
+
# Setting up PostgreSQL
# ---------------------
#
#
# Next tune the postgresql configuration, which is located in
-# `/var/lib/pgsql/data/postgresql.conf`. See
-# [the wiki](http://wiki.openstreetmap.org/wiki/Nominatim/Installation#PostgreSQL_Tuning_and_Configuration) for the parameters to change.
+# `/var/lib/pgsql/data/postgresql.conf`. See section *Postgres Tuning* in
+# [the installation page](Installation.md) for the parameters to change.
#
# Now start the postgresql service after updating this config file.
#
# Finally, we need to add two postgres users: one for the user that does
-# the import and another for the webserver ro access the database:
+# the import and another for the webserver which should access the database
+# only for reading:
#
sudo -u postgres createuser -s $USERNAME
- sudo -u postgres apache
+ sudo -u postgres createuser apache
#
# Setting up the Apache Webserver
# -------------------------------
#
# You need to create an alias to the website directory in your apache
-# configuration. This can be most easily done by XXX
+# configuration. Add a separate nominatim configuration to your webserver:
+
+#DOCS:```
+sudo tee /etc/httpd/conf.d/nominatim.conf << EOFAPACHECONF
+<Directory "$USERHOME/build/website"> #DOCS:<Directory "$USERHOME/Nominatim/build/website">
+ Options FollowSymLinks MultiViews
+ AddType text/html .php
+ DirectoryIndex search.php
+ Require all granted
+</Directory>
+
+Alias /nominatim $USERHOME/build/website #DOCS:Alias /nominatim $USERHOME/Nominatim/build/website
+EOFAPACHECONF
+#DOCS:```
+
+sudo sed -i 's:#.*::' /etc/httpd/conf.d/nominatim.conf #DOCS:
+
+#
+# Then reload apache
+#
+
+ sudo systemctl restart httpd
#
# Adding SELinux Security Settings
#
# Get the source code from Github and change into the source directory
#
+if [ "x$1" == "xyes" ]; then #DOCS:
cd $USERHOME
- sudo -u $USERNAME git clone --recursive git://github.com/twain47/Nominatim.git
+ git clone --recursive git://github.com/openstreetmap/Nominatim.git
+#DOCS: cd Nominatim
+
+else #DOCS:
+ cd $USERHOME #DOCS:
+fi #DOCS:
-# The code is built in a special directory. Create this directory,
+# The code must be built in a separate directory. Create this directory,
# then configure and build Nominatim in there:
-#DOCS: cd Nominatim
- sudo -u $USERNAME mkdir build
+ mkdir build
cd build
- sudo -u $USERNAME cmake ../Nominatim
- sudo -u $USERNAME make
+ cmake $USERHOME/Nominatim
+ make
# You need to create a minimal configuration file that tells nominatim
-# the name of your webserver user:
+# the name of your webserver user and the URL of the website:
#DOCS:```
-sudo -u $USERNAME tee << EOF
+tee settings/local.php << EOF
<?php
@define('CONST_Database_Web_User', 'apache');
+ @define('CONST_Website_BaseURL', '/nominatim/');
EOF
#DOCS:```
-# There are lots of configuration settings you can tweak. Have a look
-# at `settings/settings.php` for a full list. Most should have a sensible default.
-# If you plan to import a large dataset (e.g. Europe, North America, planet),
-# you should also enable flatnode storage of node locations. With this
-# setting enabled, node coordinates are stored in a simple file instead
-# of the database. This will save you import time and disk storage.
-# Add to your settings/local.php:
-#
-# @define('CONST_Osm2pgsql_Flatnode_File', '/path/to/flatnode.file');
-#
-#
-# Downloading additional data
-# ---------------------------
-#
-# The following data is optional but download is strongly recommended:
-#
-# sudo -u $USERNAME wget -O data/wikipedia_article.sql.bin http://www.nominatim.org/data/wikipedia_article.sql.bin
-# sudo -u $USERNAME wget -O data/wikipedia_redirect.sql.bin http://www.nominatim.org/data/wikipedia_redirect.sql.bin
-# sudo -u $USERNAME wget -O data/gb_postcode_data.sql.gz http://www.nominatim.org/data/gb_postcode_data.sql.gz
-#
-#
-# Initial Import of the Data
-# --------------------------
-#
-# **Attention:** first try the import with a small excerpt, for example from Geofabrik.
-#
-# Download the data to import and load the data with the following command:
-#
-# ./utils/setup.php --osm-file <your data file> --all [--osm2pgsql-cache 28000] 2>&1 | tee setup.log
-#
-# The --osm2pgsql-cache parameter is optional but strongly recommended for
-# planet imports. It sets the node cache size for the osm2pgsql import part
-# (see -C parameter in osm2pgsql help). 28GB are recommended for a full planet
-# imports, for excerpts you can use less.
-# Adapt to your available RAM to avoid swapping.
-#
-# The import will take as little as an hour for a small country extract
-# and as much as 10 days for a full-scale planet import on less powerful
-# hardware.
-#
-#
-# Loading Additional Datasets
-# ---------------------------
-#
-# The following commands will create additional entries for countries and POI searches:
-#
-# ./utils/specialphrases.php --countries > data/specialphrases_countries.sql
-# psql -d nominatim -f data/specialphrases_countries.sql
-# ./utils/specialphrases.php --wiki-import > data/specialphrases.sql
-# psql -d nominatim -f data/specialphrases.sql
+# Nominatim is now ready to use. Continue with
+# [importing a database from OSM data](Import_and_update.md).
projects / nominatim.git / blobdiff