+ assert_select "gpx[version=1.0][creator=OpenStreetMap.org][xmlns=http://www.topografix.com/GPX/1/0/]:root", :count => 1 do
+ assert_select "trk" do
+ assert_select "trkseg"
+ end
+ end
+ end
+
+ def test_map_without_bbox
+ ["trackpoints", "map"].each do |tq|
+ get tq
+ assert_response :bad_request
+ assert_equal "The parameter bbox is required, and must be of the form min_lon,min_lat,max_lon,max_lat", @response.body, "A bbox param was expected"
+ end
+ end
+
+ def test_traces_page_less_than_0
+ -10.upto(-1) do |i|
+ get :trackpoints, :page => i, :bbox => "-0.1,-0.1,0.1,0.1"
+ assert_response :bad_request
+ assert_equal "Page number must be greater than or equal to 0", @response.body, "The page number was #{i}"
+ end
+ 0.upto(10) do |i|
+ get :trackpoints, :page => i, :bbox => "-0.1,-0.1,0.1,0.1"
+ assert_response :success, "The page number was #{i} and should have been accepted"
+ end
+ end
+
+ def test_bbox_too_big
+ @badbigbbox.each do |bbox|
+ [ "trackpoints", "map" ].each do |tq|
+ get tq, :bbox => bbox
+ assert_response :bad_request, "The bbox:#{bbox} was expected to be too big"
+ assert_equal "The maximum bbox size is #{APP_CONFIG['max_request_area']}, and your request was too large. Either request a smaller area, or use planet.osm", @response.body, "bbox: #{bbox}"
+ end
+ end
+ end
+
+ def test_bbox_malformed
+ @badmalformedbbox.each do |bbox|
+ [ "trackpoints", "map" ].each do |tq|
+ get tq, :bbox => bbox
+ assert_response :bad_request, "The bbox:#{bbox} was expected to be malformed"
+ assert_equal "The parameter bbox is required, and must be of the form min_lon,min_lat,max_lon,max_lat", @response.body, "bbox: #{bbox}"
+ end
+ end
+ end
+
+ def test_bbox_lon_mixedup
+ @badlonmixedbbox.each do |bbox|
+ [ "trackpoints", "map" ].each do |tq|
+ get tq, :bbox => bbox
+ assert_response :bad_request, "The bbox:#{bbox} was expected to have the longitude mixed up"
+ assert_equal "The minimum longitude must be less than the maximum longitude, but it wasn't", @response.body, "bbox: #{bbox}"
+ end
+ end
+ end
+
+ def test_bbox_lat_mixedup
+ @badlatmixedbbox.each do |bbox|
+ ["trackpoints", "map"].each do |tq|
+ get tq, :bbox => bbox
+ assert_response :bad_request, "The bbox:#{bbox} was expected to have the latitude mixed up"
+ assert_equal "The minimum latitude must be less than the maximum latitude, but it wasn't", @response.body, "bbox: #{bbox}"
+ end
+ end
+ end
+
+ # We can't actually get an out of bounds error, as the bbox is sanitised.
+ #def test_latlon_outofbounds
+ # @badlatlonoutboundsbbox.each do |bbox|
+ # [ "trackpoints", "map" ].each do |tq|
+ # get tq, :bbox => bbox
+ # #print @request.to_yaml
+ # assert_response :bad_request, "The bbox #{bbox} was expected to be out of range"
+ # assert_equal "The latitudes must be between -90 an 90, and longitudes between -180 and 180", @response.body, "bbox: #{bbox}"
+ # end
+ # end
+ #end
+
+ # MySQL and Postgres require that the C based functions are installed for
+ # this test to work. More information is available from:
+ # http://wiki.openstreetmap.org/wiki/Rails#Installing_the_quadtile_functions
+ # or by looking at the readme in db/README
+ def test_changes_simple
+ get :changes
+ assert_response :success
+ #print @response.body
+ # As we have loaded the fixtures, we can assume that there are no
+ # changes recently
+ now = Time.now.getutc
+ hourago = now - 1.hour
+ # Note that this may fail on a very slow machine, so isn't a great test
+ assert_select "osm[version='#{API_VERSION}'][generator='#{GENERATOR}']:root", :count => 1 do
+ assert_select "changes[starttime='#{hourago.xmlschema}'][endtime='#{now.xmlschema}']", :count => 1
+ end
+ end
+
+ def test_changes_zoom_invalid
+ zoom_to_test = %w{ p -1 0 17 one two }
+ zoom_to_test.each do |zoom|
+ get :changes, :zoom => zoom
+ assert_response :bad_request
+ assert_equal @response.body, "Requested zoom is invalid, or the supplied start is after the end time, or the start duration is more than 24 hours"
+ end
+ end
+
+ def test_changes_zoom_valid
+ 1.upto(16) do |zoom|
+ get :changes, :zoom => zoom
+ assert_response :success
+ # NOTE: there was a test here for the timing, but it was too sensitive to be a good test
+ # and it was annoying.
+ assert_select "osm[version='#{API_VERSION}'][generator='#{GENERATOR}']:root", :count => 1 do
+ assert_select "changes", :count => 1
+ end
+ end
+ end
+
+ def test_start_end_time_invalid
+
+ end
+
+ def test_start_end_time_invalid
+
+ end
+
+ def test_hours_invalid
+ invalid = %w{ -21 335 -1 0 25 26 100 one two three ping pong : }
+ invalid.each do |hour|
+ get :changes, :hours => hour
+ assert_response :bad_request, "Problem with the hour: #{hour}"
+ assert_equal @response.body, "Requested zoom is invalid, or the supplied start is after the end time, or the start duration is more than 24 hours", "Problem with the hour: #{hour}."
+ end
+ end
+
+ def test_hours_valid
+ 1.upto(24) do |hour|
+ get :changes, :hours => hour
+ assert_response :success
+ end
+ end
+
+ def test_capabilities
+ get :capabilities
+ assert_response :success
+ assert_select "osm:root[version='#{API_VERSION}'][generator='#{GENERATOR}']", :count => 1 do
+ assert_select "api", :count => 1 do
+ assert_select "version[minimum=#{API_VERSION}][maximum=#{API_VERSION}]", :count => 1
+ assert_select "area[maximum=#{APP_CONFIG['max_request_area']}]", :count => 1
+ assert_select "tracepoints[per_page=#{APP_CONFIG['tracepoints_per_page']}]", :count => 1
+ assert_select "changesets[maximum_elements=#{Changeset::MAX_ELEMENTS}]", :count => 1
+ end
+ end
projects / rails.git / blobdiff