def setup
super
- @badbigbbox = %w{ -0.1,-0.1,1.1,1.1 10,10,11,11 }
- @badmalformedbbox = %w{ -0.1 hello
- 10N2W10.1N2.1W }
- @badlatmixedbbox = %w{ 0,0.1,0.1,0 -0.1,80,0.1,70 0.24,54.34,0.25,54.33 }
- @badlonmixedbbox = %w{ 80,-0.1,70,0.1 54.34,0.24,54.33,0.25 }
- #@badlatlonoutboundsbbox = %w{ 191,-0.1,193,0.1 -190.1,89.9,-190,90 }
- @goodbbox = %w{ -0.1,-0.1,0.1,0.1 51.1,-0.1,51.2,0
- -0.1,%20-0.1,%200.1,%200.1 -0.1edcd,-0.1d,0.1,0.1 -0.1E,-0.1E,0.1S,0.1N S0.1,W0.1,N0.1,E0.1}
+ @badbigbbox = %w(-0.1,-0.1,1.1,1.1 10,10,11,11)
+ @badmalformedbbox = %w(-0.1 hello
+ 10N2W10.1N2.1W)
+ @badlatmixedbbox = %w(0,0.1,0.1,0 -0.1,80,0.1,70 0.24,54.34,0.25,54.33)
+ @badlonmixedbbox = %w(80,-0.1,70,0.1 54.34,0.24,54.33,0.25)
+ # @badlatlonoutboundsbbox = %w{ 191,-0.1,193,0.1 -190.1,89.9,-190,90 }
+ @goodbbox = %w(-0.1,-0.1,0.1,0.1 51.1,-0.1,51.2,0
+ -0.1,%20-0.1,%200.1,%200.1 -0.1edcd,-0.1d,0.1,0.1 -0.1E,-0.1E,0.1S,0.1N S0.1,W0.1,N0.1,E0.1)
# That last item in the goodbbox really shouldn't be there, as the API should
# reall reject it, however this is to test to see if the api changes.
end
node = current_nodes(:used_node_1)
# Need to split the min/max lat/lon out into their own variables here
# so that we can test they are returned later.
- minlon = node.lon-0.1
- minlat = node.lat-0.1
- maxlon = node.lon+0.1
- maxlat = node.lat+0.1
+ minlon = node.lon - 0.1
+ minlat = node.lat - 0.1
+ maxlon = node.lon + 0.1
+ maxlat = node.lat + 0.1
bbox = "#{minlon},#{minlat},#{maxlon},#{maxlat}"
get :map, :bbox => bbox
if $VERBOSE
def test_tracepoints
point = gpx_files(:public_trace_file)
- minlon = point.longitude-0.001
- minlat = point.latitude-0.001
- maxlon = point.longitude+0.001
- maxlat = point.latitude+0.001
+ minlon = point.longitude - 0.001
+ minlat = point.latitude - 0.001
+ maxlon = point.longitude + 0.001
+ maxlat = point.latitude + 0.001
bbox = "#{minlon},#{minlat},#{maxlon},#{maxlat}"
get :trackpoints, :bbox => bbox
assert_response :success
def test_tracepoints_trackable
point = gpx_files(:trackable_trace_file)
- minlon = point.longitude-0.002
- minlat = point.latitude-0.002
- maxlon = point.longitude+0.002
- maxlat = point.latitude+0.002
+ minlon = point.longitude - 0.002
+ minlat = point.latitude - 0.002
+ maxlon = point.longitude + 0.002
+ maxlat = point.latitude + 0.002
bbox = "#{minlon},#{minlat},#{maxlon},#{maxlat}"
get :trackpoints, :bbox => bbox
assert_response :success
def test_tracepoints_identifiable
point = gpx_files(:identifiable_trace_file)
- minlon = point.longitude-0.002
- minlat = point.latitude-0.002
- maxlon = point.longitude+0.002
- maxlat = point.latitude+0.002
+ minlon = point.longitude - 0.002
+ minlat = point.latitude - 0.002
+ maxlon = point.longitude + 0.002
+ maxlat = point.latitude + 0.002
bbox = "#{minlon},#{minlat},#{maxlon},#{maxlat}"
get :trackpoints, :bbox => bbox
assert_response :success
end
def test_map_without_bbox
- ["trackpoints", "map"].each do |tq|
+ %w(trackpoints map).each do |tq|
get tq
assert_response :bad_request
assert_equal "The parameter bbox is required, and must be of the form min_lon,min_lat,max_lon,max_lat", @response.body, "A bbox param was expected"
def test_bbox_too_big
@badbigbbox.each do |bbox|
- [ "trackpoints", "map" ].each do |tq|
+ %w(trackpoints map).each do |tq|
get tq, :bbox => bbox
assert_response :bad_request, "The bbox:#{bbox} was expected to be too big"
assert_equal "The maximum bbox size is #{MAX_REQUEST_AREA}, and your request was too large. Either request a smaller area, or use planet.osm", @response.body, "bbox: #{bbox}"
def test_bbox_malformed
@badmalformedbbox.each do |bbox|
- [ "trackpoints", "map" ].each do |tq|
+ %w(trackpoints map).each do |tq|
get tq, :bbox => bbox
assert_response :bad_request, "The bbox:#{bbox} was expected to be malformed"
assert_equal "The parameter bbox is required, and must be of the form min_lon,min_lat,max_lon,max_lat", @response.body, "bbox: #{bbox}"
def test_bbox_lon_mixedup
@badlonmixedbbox.each do |bbox|
- [ "trackpoints", "map" ].each do |tq|
+ %w(trackpoints map).each do |tq|
get tq, :bbox => bbox
assert_response :bad_request, "The bbox:#{bbox} was expected to have the longitude mixed up"
assert_equal "The minimum longitude must be less than the maximum longitude, but it wasn't", @response.body, "bbox: #{bbox}"
def test_bbox_lat_mixedup
@badlatmixedbbox.each do |bbox|
- ["trackpoints", "map"].each do |tq|
+ %w(trackpoints map).each do |tq|
get tq, :bbox => bbox
assert_response :bad_request, "The bbox:#{bbox} was expected to have the latitude mixed up"
assert_equal "The minimum latitude must be less than the maximum latitude, but it wasn't", @response.body, "bbox: #{bbox}"
end
# We can't actually get an out of bounds error, as the bbox is sanitised.
- #def test_latlon_outofbounds
+ # def test_latlon_outofbounds
# @badlatlonoutboundsbbox.each do |bbox|
# [ "trackpoints", "map" ].each do |tq|
# get tq, :bbox => bbox
# assert_equal "The latitudes must be between -90 an 90, and longitudes between -180 and 180", @response.body, "bbox: #{bbox}"
# end
# end
- #end
+ # end
# MySQL and Postgres require that the C based functions are installed for
# this test to work. More information is available from:
Timecop.freeze(Time.parse('2010-04-03 10:55:00'))
get :changes
assert_response :success
- #print @response.body
+ # print @response.body
# As we have loaded the fixtures, we can assume that there are no
# changes at the time we have frozen at
now = Time.now.getutc
end
def test_changes_zoom_invalid
- zoom_to_test = %w{ p -1 0 17 one two }
+ zoom_to_test = %w(p -1 0 17 one two)
zoom_to_test.each do |zoom|
get :changes, :zoom => zoom
assert_response :bad_request
end
def test_hours_invalid
- invalid = %w{ -21 335 -1 0 25 26 100 one two three ping pong : }
+ invalid = %w(-21 335 -1 0 25 26 100 one two three ping pong :)
invalid.each do |hour|
get :changes, :hours => hour
assert_response :bad_request, "Problem with the hour: #{hour}"
projects / rails.git / blobdiff