# frozen_string_literal: true
-Rails.application.reloader.to_prepare do
- Doorkeeper.configure do
- # Change the ORM that doorkeeper will use (requires ORM extensions installed).
- # Check the list of supported ORMs here: https://github.com/doorkeeper-gem/doorkeeper#orms
- orm :active_record
-
- # This block will be called to check whether the resource owner is authenticated or not.
- resource_owner_authenticator do
- current_user
- end
-
- # If you didn't skip applications controller from Doorkeeper routes in your application routes.rb
- # file then you need to declare this block in order to restrict access to the web interface for
- # adding oauth authorized applications. In other case it will return 403 Forbidden response
- # every time somebody will try to access the admin web interface.
-
- admin_authenticator do
- current_user
- end
-
- # You can use your own model classes if you need to extend (or even override) default
- # Doorkeeper models such as `Application`, `AccessToken` and `AccessGrant.
- #
- # Be default Doorkeeper ActiveRecord ORM uses it's own classes:
- #
- # access_token_class "Doorkeeper::AccessToken"
- # access_grant_class "Doorkeeper::AccessGrant"
- # application_class "Doorkeeper::Application"
- #
- # Don't forget to include Doorkeeper ORM mixins into your custom models:
- #
- # * ::Doorkeeper::Orm::ActiveRecord::Mixins::AccessToken - for access token
- # * ::Doorkeeper::Orm::ActiveRecord::Mixins::AccessGrant - for access grant
- # * ::Doorkeeper::Orm::ActiveRecord::Mixins::Application - for application (OAuth2 clients)
- #
- # For example:
- #
- # access_token_class "MyAccessToken"
- #
- # class MyAccessToken < ApplicationRecord
- # include ::Doorkeeper::Orm::ActiveRecord::Mixins::AccessToken
- #
- # self.table_name = "hey_i_wanna_my_name"
- #
- # def destroy_me!
- # destroy
- # end
- # end
-
- application_class "Oauth2Application" unless Settings.status == "database_offline"
-
- # Enables polymorphic Resource Owner association for Access Tokens and Access Grants.
- # By default this option is disabled.
- #
- # Make sure you properly setup you database and have all the required columns (run
- # `bundle exec rails generate doorkeeper:enable_polymorphic_resource_owner` and execute Rails
- # migrations).
- #
- # If this option enabled, Doorkeeper will store not only Resource Owner primary key
- # value, but also it's type (class name). See "Polymorphic Associations" section of
- # Rails guides: https://guides.rubyonrails.org/association_basics.html#polymorphic-associations
- #
- # [NOTE] If you apply this option on already existing project don't forget to manually
- # update `resource_owner_type` column in the database and fix migration template as it will
- # set NOT NULL constraint for Access Grants table.
- #
- # use_polymorphic_resource_owner
-
- # If you are planning to use Doorkeeper in Rails 5 API-only application, then you might
- # want to use API mode that will skip all the views management and change the way how
- # Doorkeeper responds to a requests.
- #
- # api_only
-
- # Enforce token request content type to application/x-www-form-urlencoded.
- # It is not enabled by default to not break prior versions of the gem.
-
- enforce_content_type
-
- # Authorization Code expiration time (default: 10 minutes).
- #
- # authorization_code_expires_in 10.minutes
-
- # Access token expiration time (default: 2 hours).
- # If you want to disable expiration, set this to `nil`.
-
- access_token_expires_in nil
-
- # Assign custom TTL for access tokens. Will be used instead of access_token_expires_in
- # option if defined. In case the block returns `nil` value Doorkeeper fallbacks to
- # +access_token_expires_in+ configuration option value. If you really need to issue a
- # non-expiring access token (which is not recommended) then you need to return
- # Float::INFINITY from this block.
- #
- # `context` has the following properties available:
- #
- # * `client` - the OAuth client application (see Doorkeeper::OAuth::Client)
- # * `grant_type` - the grant type of the request (see Doorkeeper::OAuth)
- # * `scopes` - the requested scopes (see Doorkeeper::OAuth::Scopes)
- # * `resource_owner` - authorized resource owner instance (if present)
- #
- # custom_access_token_expires_in do |context|
- # context.client.additional_settings.implicit_oauth_expiration
- # end
-
- # Use a custom class for generating the access token.
- # See https://doorkeeper.gitbook.io/guides/configuration/other-configurations#custom-access-token-generator
- #
- # access_token_generator '::Doorkeeper::JWT'
-
- # The controller +Doorkeeper::ApplicationController+ inherits from.
- # Defaults to +ActionController::Base+ unless +api_only+ is set, which changes the default to
- # +ActionController::API+. The return value of this option must be a stringified class name.
- # See https://doorkeeper.gitbook.io/guides/configuration/other-configurations#custom-controllers
-
- base_controller "ApplicationController"
-
- # Reuse access token for the same resource owner within an application (disabled by default).
- #
- # This option protects your application from creating new tokens before old valid one becomes
- # expired so your database doesn't bloat. Keep in mind that when this option is `on` Doorkeeper
- # doesn't updates existing token expiration time, it will create a new token instead.
- # Rationale: https://github.com/doorkeeper-gem/doorkeeper/issues/383
- #
- # You can not enable this option together with +hash_token_secrets+.
-
- reuse_access_token
-
- # In case you enabled `reuse_access_token` option Doorkeeper will try to find matching
- # token using `matching_token_for` Access Token API that searches for valid records
- # in batches in order not to pollute the memory with all the database records. By default
- # Doorkeeper uses batch size of 10 000 records. You can increase or decrease this value
- # depending on your needs and server capabilities.
- #
- # token_lookup_batch_size 10_000
-
- # Set a limit for token_reuse if using reuse_access_token option
- #
- # This option limits token_reusability to some extent.
- # If not set then access_token will be reused unless it expires.
- # Rationale: https://github.com/doorkeeper-gem/doorkeeper/issues/1189
- #
- # This option should be a percentage(i.e. (0,100])
- #
- # token_reuse_limit 100
-
- # Only allow one valid access token obtained via client credentials
- # per client. If a new access token is obtained before the old one
- # expired, the old one gets revoked (disabled by default)
- #
- # When enabling this option, make sure that you do not expect multiple processes
- # using the same credentials at the same time (e.g. web servers spanning
- # multiple machines and/or processes).
- #
- # revoke_previous_client_credentials_token
-
- # Hash access and refresh tokens before persisting them.
- # This will disable the possibility to use +reuse_access_token+
- # since plain values can no longer be retrieved.
- #
- # Note: If you are already a user of doorkeeper and have existing tokens
- # in your installation, they will be invalid without adding 'fallback: :plain'.
- #
- # hash_token_secrets
- # By default, token secrets will be hashed using the
- # +Doorkeeper::Hashing::SHA256+ strategy.
- #
- # If you wish to use another hashing implementation, you can override
- # this strategy as follows:
-
- hash_token_secrets :using => "::Doorkeeper::SecretStoring::Plain",
- :fallback => "::Doorkeeper::SecretStoring::Sha256Hash"
-
- # Keep in mind that changing the hashing function will invalidate all existing
- # secrets, if there are any.
-
- # Hash application secrets before persisting them.
-
- hash_application_secrets
-
- # By default, applications will be hashed
- # with the +Doorkeeper::SecretStoring::SHA256+ strategy.
- #
- # If you wish to use bcrypt for application secret hashing, uncomment
- # this line instead:
- #
- # hash_application_secrets using: '::Doorkeeper::SecretStoring::BCrypt'
-
- # When the above option is enabled, and a hashed token or secret is not found,
- # you can allow to fall back to another strategy. For users upgrading
- # doorkeeper and wishing to enable hashing, you will probably want to enable
- # the fallback to plain tokens.
- #
- # This will ensure that old access tokens and secrets
- # will remain valid even if the hashing above is enabled.
- #
- # This can be done by adding 'fallback: plain', e.g. :
- #
- # hash_application_secrets using: '::Doorkeeper::SecretStoring::BCrypt', fallback: :plain
-
- # Issue access tokens with refresh token (disabled by default), you may also
- # pass a block which accepts `context` to customize when to give a refresh
- # token or not. Similar to +custom_access_token_expires_in+, `context` has
- # the following properties:
- #
- # `client` - the OAuth client application (see Doorkeeper::OAuth::Client)
- # `grant_type` - the grant type of the request (see Doorkeeper::OAuth)
- # `scopes` - the requested scopes (see Doorkeeper::OAuth::Scopes)
- #
- # use_refresh_token
-
- # Provide support for an owner to be assigned to each registered application (disabled by default)
- # Optional parameter confirmation: true (default: false) if you want to enforce ownership of
- # a registered application
- # NOTE: you must also run the rails g doorkeeper:application_owner generator
- # to provide the necessary support
-
- enable_application_owner :confirmation => true
-
- # Define access token scopes for your provider
- # For more information go to
- # https://doorkeeper.gitbook.io/guides/ruby-on-rails/scopes
-
- # default_scopes :public
- optional_scopes(*Oauth::SCOPES, *Oauth::PRIVILEGED_SCOPES)
-
- # Allows to restrict only certain scopes for grant_type.
- # By default, all the scopes will be available for all the grant types.
- #
- # Keys to this hash should be the name of grant_type and
- # values should be the array of scopes for that grant type.
- # Note: scopes should be from configured_scopes (i.e. default or optional)
- #
- # scopes_by_grant_type password: [:write], client_credentials: [:update]
-
- # Forbids creating/updating applications with arbitrary scopes that are
- # not in configuration, i.e. +default_scopes+ or +optional_scopes+.
- # (disabled by default)
-
- enforce_configured_scopes
-
- # Change the way client credentials are retrieved from the request object.
- # By default it retrieves first from the `HTTP_AUTHORIZATION` header, then
- # falls back to the `:client_id` and `:client_secret` params from the `params` object.
- # Check out https://github.com/doorkeeper-gem/doorkeeper/wiki/Changing-how-clients-are-authenticated
- # for more information on customization
- #
- # client_credentials :from_basic, :from_params
-
- # Change the way access token is authenticated from the request object.
- # By default it retrieves first from the `HTTP_AUTHORIZATION` header, then
- # falls back to the `:access_token` or `:bearer_token` params from the `params` object.
- # Check out https://github.com/doorkeeper-gem/doorkeeper/wiki/Changing-how-clients-are-authenticated
- # for more information on customization
-
- access_token_methods :from_bearer_authorization
-
- # Forces the usage of the HTTPS protocol in non-native redirect uris (enabled
- # by default in non-development environments). OAuth2 delegates security in
- # communication to the HTTPS protocol so it is wise to keep this enabled.
- #
- # Callable objects such as proc, lambda, block or any object that responds to
- # #call can be used in order to allow conditional checks (to allow non-SSL
- # redirects to localhost for example).
-
- force_ssl_in_redirect_uri do |uri|
- !Rails.env.development? && uri.host != "127.0.0.1"
- end
-
- # Specify what redirect URI's you want to block during Application creation.
- # Any redirect URI is whitelisted by default.
- #
- # You can use this option in order to forbid URI's with 'javascript' scheme
- # for example.
- #
- # forbid_redirect_uri { |uri| uri.scheme.to_s.downcase == 'javascript' }
-
- # Allows to set blank redirect URIs for Applications in case Doorkeeper configured
- # to use URI-less OAuth grant flows like Client Credentials or Resource Owner
- # Password Credentials. The option is on by default and checks configured grant
- # types, but you **need** to manually drop `NOT NULL` constraint from `redirect_uri`
- # column for `oauth_applications` database table.
- #
- # You can completely disable this feature with:
- #
- # allow_blank_redirect_uri false
- #
- # Or you can define your custom check:
- #
- # allow_blank_redirect_uri do |grant_flows, client|
- # client.superapp?
- # end
-
- # Specify how authorization errors should be handled.
- # By default, doorkeeper renders json errors when access token
- # is invalid, expired, revoked or has invalid scopes.
- #
- # If you want to render error response yourself (i.e. rescue exceptions),
- # set +handle_auth_errors+ to `:raise` and rescue Doorkeeper::Errors::InvalidToken
- # or following specific errors:
- #
- # Doorkeeper::Errors::TokenForbidden, Doorkeeper::Errors::TokenExpired,
- # Doorkeeper::Errors::TokenRevoked, Doorkeeper::Errors::TokenUnknown
- #
- # handle_auth_errors :raise
-
- # Customize token introspection response.
- # Allows to add your own fields to default one that are required by the OAuth spec
- # for the introspection response. It could be `sub`, `aud` and so on.
- # This configuration option can be a proc, lambda or any Ruby object responds
- # to `.call` method and result of it's invocation must be a Hash.
- #
- # custom_introspection_response do |token, context|
- # {
- # "sub": "Z5O3upPC88QrAjx00dis",
- # "aud": "https://protected.example.net/resource",
- # "username": User.find(token.resource_owner_id).username
- # }
- # end
- #
- # or
- #
- # custom_introspection_response CustomIntrospectionResponder
-
- # Specify what grant flows are enabled in array of Strings. The valid
- # strings and the flows they enable are:
- #
- # "authorization_code" => Authorization Code Grant Flow
- # "implicit" => Implicit Grant Flow
- # "password" => Resource Owner Password Credentials Grant Flow
- # "client_credentials" => Client Credentials Grant Flow
- #
- # If not specified, Doorkeeper enables authorization_code and
- # client_credentials.
- #
- # implicit and password grant flows have risks that you should understand
- # before enabling:
- # http://tools.ietf.org/html/rfc6819#section-4.4.2
- # http://tools.ietf.org/html/rfc6819#section-4.4.3
-
- grant_flows %w[authorization_code]
-
- # Allows to customize OAuth grant flows that +each+ application support.
- # You can configure a custom block (or use a class respond to `#call`) that must
- # return `true` in case Application instance supports requested OAuth grant flow
- # during the authorization request to the server. This configuration +doesn't+
- # set flows per application, it only allows to check if application supports
- # specific grant flow.
- #
- # For example you can add an additional database column to `oauth_applications` table,
- # say `t.array :grant_flows, default: []`, and store allowed grant flows that can
- # be used with this application there. Then when authorization requested Doorkeeper
- # will call this block to check if specific Application (passed with client_id and/or
- # client_secret) is allowed to perform the request for the specific grant type
- # (authorization, password, client_credentials, etc).
- #
- # Example of the block:
- #
- # ->(flow, client) { client.grant_flows.include?(flow) }
- #
- # In case this option invocation result is `false`, Doorkeeper server returns
- # :unauthorized_client error and stops the request.
- #
- # @param allow_grant_flow_for_client [Proc] Block or any object respond to #call
- # @return [Boolean] `true` if allow or `false` if forbid the request
- #
- # allow_grant_flow_for_client do |grant_flow, client|
- # # `grant_flows` is an Array column with grant
- # # flows that application supports
- #
- # client.grant_flows.include?(grant_flow)
- # end
-
- # If you need arbitrary Resource Owner-Client authorization you can enable this option
- # and implement the check your need. Config option must respond to #call and return
- # true in case resource owner authorized for the specific application or false in other
- # cases.
- #
- # Be default all Resource Owners are authorized to any Client (application).
- #
- # authorize_resource_owner_for_client do |client, resource_owner|
- # resource_owner.admin? || client.owners_whitelist.include?(resource_owner)
- # end
-
- # Hook into the strategies' request & response life-cycle in case your
- # application needs advanced customization or logging:
- #
- # before_successful_strategy_response do |request|
- # puts "BEFORE HOOK FIRED! #{request}"
- # end
- #
- # after_successful_strategy_response do |request, response|
- # puts "AFTER HOOK FIRED! #{request}, #{response}"
- # end
-
- # Hook into Authorization flow in order to implement Single Sign Out
- # or add any other functionality. Inside the block you have an access
- # to `controller` (authorizations controller instance) and `context`
- # (Doorkeeper::OAuth::Hooks::Context instance) which provides pre auth
- # or auth objects with issued token based on hook type (before or after).
- #
- # before_successful_authorization do |controller, context|
- # Rails.logger.info(controller.request.params.inspect)
- #
- # Rails.logger.info(context.pre_auth.inspect)
- # end
- #
- # after_successful_authorization do |controller, context|
- # controller.session[:logout_urls] <<
- # Doorkeeper::Application
- # .find_by(controller.request.params.slice(:redirect_uri))
- # .logout_uri
- #
- # Rails.logger.info(context.auth.inspect)
- # Rails.logger.info(context.issued_token)
- # end
-
- # Under some circumstances you might want to have applications auto-approved,
- # so that the user skips the authorization step.
- # For example if dealing with a trusted application.
-
- skip_authorization do |_, client|
- client.scopes.include?("skip_authorization")
- end
-
- # Configure custom constraints for the Token Introspection request.
- # By default this configuration option allows to introspect a token by another
- # token of the same application, OR to introspect the token that belongs to
- # authorized client (from authenticated client) OR when token doesn't
- # belong to any client (public token). Otherwise requester has no access to the
- # introspection and it will return response as stated in the RFC.
- #
- # Block arguments:
- #
- # @param token [Doorkeeper::AccessToken]
- # token to be introspected
- #
- # @param authorized_client [Doorkeeper::Application]
- # authorized client (if request is authorized using Basic auth with
- # Client Credentials for example)
- #
- # @param authorized_token [Doorkeeper::AccessToken]
- # Bearer token used to authorize the request
- #
- # In case the block returns `nil` or `false` introspection responses with 401 status code
- # when using authorized token to introspect, or you'll get 200 with { "active": false } body
- # when using authorized client to introspect as stated in the
- # RFC 7662 section 2.2. Introspection Response.
- #
- # Using with caution:
- # Keep in mind that these three parameters pass to block can be nil as following case:
- # `authorized_client` is nil if and only if `authorized_token` is present, and vice versa.
- # `token` will be nil if and only if `authorized_token` is present.
- # So remember to use `&` or check if it is present before calling method on
- # them to make sure you doesn't get NoMethodError exception.
- #
- # You can define your custom check:
- #
- # allow_token_introspection do |token, authorized_client, authorized_token|
- # if authorized_token
- # # customize: require `introspection` scope
- # authorized_token.application == token&.application ||
- # authorized_token.scopes.include?("introspection")
- # elsif token.application
- # # `protected_resource` is a new database boolean column, for example
- # authorized_client == token.application || authorized_client.protected_resource?
- # else
- # # public token (when token.application is nil, token doesn't belong to any application)
- # true
- # end
- # end
- #
- # Or you can completely disable any token introspection:
- #
- # allow_token_introspection false
- #
- # If you need to block the request at all, then configure your routes.rb or web-server
- # like nginx to forbid the request.
-
- # WWW-Authenticate Realm (default: "Doorkeeper").
- #
- # realm "Doorkeeper"
+require_relative "../../lib/oauth"
+
+Doorkeeper.configure do
+ # Change the ORM that doorkeeper will use (requires ORM extensions installed).
+ # Check the list of supported ORMs here: https://github.com/doorkeeper-gem/doorkeeper#orms
+ orm :active_record
+
+ # This block will be called to check whether the resource owner is authenticated or not.
+ resource_owner_authenticator do
+ current_user
+ end
+
+ # If you didn't skip applications controller from Doorkeeper routes in your application routes.rb
+ # file then you need to declare this block in order to restrict access to the web interface for
+ # adding oauth authorized applications. In other case it will return 403 Forbidden response
+ # every time somebody will try to access the admin web interface.
+
+ admin_authenticator do
+ current_user
end
+
+ # You can use your own model classes if you need to extend (or even override) default
+ # Doorkeeper models such as `Application`, `AccessToken` and `AccessGrant.
+ #
+ # Be default Doorkeeper ActiveRecord ORM uses it's own classes:
+ #
+ # access_token_class "Doorkeeper::AccessToken"
+ # access_grant_class "Doorkeeper::AccessGrant"
+ # application_class "Doorkeeper::Application"
+ #
+ # Don't forget to include Doorkeeper ORM mixins into your custom models:
+ #
+ # * ::Doorkeeper::Orm::ActiveRecord::Mixins::AccessToken - for access token
+ # * ::Doorkeeper::Orm::ActiveRecord::Mixins::AccessGrant - for access grant
+ # * ::Doorkeeper::Orm::ActiveRecord::Mixins::Application - for application (OAuth2 clients)
+ #
+ # For example:
+ #
+ # access_token_class "MyAccessToken"
+ #
+ # class MyAccessToken < ApplicationRecord
+ # include ::Doorkeeper::Orm::ActiveRecord::Mixins::AccessToken
+ #
+ # self.table_name = "hey_i_wanna_my_name"
+ #
+ # def destroy_me!
+ # destroy
+ # end
+ # end
+
+ application_class "Oauth2Application" unless Settings.status == "database_offline"
+
+ # Enables polymorphic Resource Owner association for Access Tokens and Access Grants.
+ # By default this option is disabled.
+ #
+ # Make sure you properly setup you database and have all the required columns (run
+ # `bundle exec rails generate doorkeeper:enable_polymorphic_resource_owner` and execute Rails
+ # migrations).
+ #
+ # If this option enabled, Doorkeeper will store not only Resource Owner primary key
+ # value, but also it's type (class name). See "Polymorphic Associations" section of
+ # Rails guides: https://guides.rubyonrails.org/association_basics.html#polymorphic-associations
+ #
+ # [NOTE] If you apply this option on already existing project don't forget to manually
+ # update `resource_owner_type` column in the database and fix migration template as it will
+ # set NOT NULL constraint for Access Grants table.
+ #
+ # use_polymorphic_resource_owner
+
+ # If you are planning to use Doorkeeper in Rails 5 API-only application, then you might
+ # want to use API mode that will skip all the views management and change the way how
+ # Doorkeeper responds to a requests.
+ #
+ # api_only
+
+ # Enforce token request content type to application/x-www-form-urlencoded.
+ # It is not enabled by default to not break prior versions of the gem.
+
+ enforce_content_type
+
+ # Authorization Code expiration time (default: 10 minutes).
+ #
+ # authorization_code_expires_in 10.minutes
+
+ # Access token expiration time (default: 2 hours).
+ # If you want to disable expiration, set this to `nil`.
+
+ access_token_expires_in nil
+
+ # Assign custom TTL for access tokens. Will be used instead of access_token_expires_in
+ # option if defined. In case the block returns `nil` value Doorkeeper fallbacks to
+ # +access_token_expires_in+ configuration option value. If you really need to issue a
+ # non-expiring access token (which is not recommended) then you need to return
+ # Float::INFINITY from this block.
+ #
+ # `context` has the following properties available:
+ #
+ # * `client` - the OAuth client application (see Doorkeeper::OAuth::Client)
+ # * `grant_type` - the grant type of the request (see Doorkeeper::OAuth)
+ # * `scopes` - the requested scopes (see Doorkeeper::OAuth::Scopes)
+ # * `resource_owner` - authorized resource owner instance (if present)
+ #
+ # custom_access_token_expires_in do |context|
+ # context.client.additional_settings.implicit_oauth_expiration
+ # end
+
+ # Use a custom class for generating the access token.
+ # See https://doorkeeper.gitbook.io/guides/configuration/other-configurations#custom-access-token-generator
+ #
+ # access_token_generator '::Doorkeeper::JWT'
+
+ # The controller +Doorkeeper::ApplicationController+ inherits from.
+ # Defaults to +ActionController::Base+ unless +api_only+ is set, which changes the default to
+ # +ActionController::API+. The return value of this option must be a stringified class name.
+ # See https://doorkeeper.gitbook.io/guides/configuration/other-configurations#custom-controllers
+
+ base_controller "ApplicationController"
+
+ # Reuse access token for the same resource owner within an application (disabled by default).
+ #
+ # This option protects your application from creating new tokens before old valid one becomes
+ # expired so your database doesn't bloat. Keep in mind that when this option is `on` Doorkeeper
+ # doesn't updates existing token expiration time, it will create a new token instead.
+ # Rationale: https://github.com/doorkeeper-gem/doorkeeper/issues/383
+ #
+ # You can not enable this option together with +hash_token_secrets+.
+
+ reuse_access_token
+
+ # In case you enabled `reuse_access_token` option Doorkeeper will try to find matching
+ # token using `matching_token_for` Access Token API that searches for valid records
+ # in batches in order not to pollute the memory with all the database records. By default
+ # Doorkeeper uses batch size of 10 000 records. You can increase or decrease this value
+ # depending on your needs and server capabilities.
+ #
+ # token_lookup_batch_size 10_000
+
+ # Set a limit for token_reuse if using reuse_access_token option
+ #
+ # This option limits token_reusability to some extent.
+ # If not set then access_token will be reused unless it expires.
+ # Rationale: https://github.com/doorkeeper-gem/doorkeeper/issues/1189
+ #
+ # This option should be a percentage(i.e. (0,100])
+ #
+ # token_reuse_limit 100
+
+ # Only allow one valid access token obtained via client credentials
+ # per client. If a new access token is obtained before the old one
+ # expired, the old one gets revoked (disabled by default)
+ #
+ # When enabling this option, make sure that you do not expect multiple processes
+ # using the same credentials at the same time (e.g. web servers spanning
+ # multiple machines and/or processes).
+ #
+ # revoke_previous_client_credentials_token
+
+ # Hash access and refresh tokens before persisting them.
+ # This will disable the possibility to use +reuse_access_token+
+ # since plain values can no longer be retrieved.
+ #
+ # Note: If you are already a user of doorkeeper and have existing tokens
+ # in your installation, they will be invalid without adding 'fallback: :plain'.
+ #
+ # hash_token_secrets
+ # By default, token secrets will be hashed using the
+ # +Doorkeeper::Hashing::SHA256+ strategy.
+ #
+ # If you wish to use another hashing implementation, you can override
+ # this strategy as follows:
+
+ hash_token_secrets :using => "::Doorkeeper::SecretStoring::Plain",
+ :fallback => "::Doorkeeper::SecretStoring::Sha256Hash"
+
+ # Keep in mind that changing the hashing function will invalidate all existing
+ # secrets, if there are any.
+
+ # Hash application secrets before persisting them.
+
+ hash_application_secrets
+
+ # By default, applications will be hashed
+ # with the +Doorkeeper::SecretStoring::SHA256+ strategy.
+ #
+ # If you wish to use bcrypt for application secret hashing, uncomment
+ # this line instead:
+ #
+ # hash_application_secrets using: '::Doorkeeper::SecretStoring::BCrypt'
+
+ # When the above option is enabled, and a hashed token or secret is not found,
+ # you can allow to fall back to another strategy. For users upgrading
+ # doorkeeper and wishing to enable hashing, you will probably want to enable
+ # the fallback to plain tokens.
+ #
+ # This will ensure that old access tokens and secrets
+ # will remain valid even if the hashing above is enabled.
+ #
+ # This can be done by adding 'fallback: plain', e.g. :
+ #
+ # hash_application_secrets using: '::Doorkeeper::SecretStoring::BCrypt', fallback: :plain
+
+ # Issue access tokens with refresh token (disabled by default), you may also
+ # pass a block which accepts `context` to customize when to give a refresh
+ # token or not. Similar to +custom_access_token_expires_in+, `context` has
+ # the following properties:
+ #
+ # `client` - the OAuth client application (see Doorkeeper::OAuth::Client)
+ # `grant_type` - the grant type of the request (see Doorkeeper::OAuth)
+ # `scopes` - the requested scopes (see Doorkeeper::OAuth::Scopes)
+ #
+ # use_refresh_token
+
+ # Provide support for an owner to be assigned to each registered application (disabled by default)
+ # Optional parameter confirmation: true (default: false) if you want to enforce ownership of
+ # a registered application
+ # NOTE: you must also run the rails g doorkeeper:application_owner generator
+ # to provide the necessary support
+
+ enable_application_owner :confirmation => true
+
+ # Define access token scopes for your provider
+ # For more information go to
+ # https://doorkeeper.gitbook.io/guides/ruby-on-rails/scopes
+
+ # default_scopes :public
+ optional_scopes(*Oauth::SCOPES, *Oauth::PRIVILEGED_SCOPES, *Oauth::OAUTH2_SCOPES)
+
+ # Allows to restrict only certain scopes for grant_type.
+ # By default, all the scopes will be available for all the grant types.
+ #
+ # Keys to this hash should be the name of grant_type and
+ # values should be the array of scopes for that grant type.
+ # Note: scopes should be from configured_scopes (i.e. default or optional)
+ #
+ # scopes_by_grant_type password: [:write], client_credentials: [:update]
+
+ # Forbids creating/updating applications with arbitrary scopes that are
+ # not in configuration, i.e. +default_scopes+ or +optional_scopes+.
+ # (disabled by default)
+
+ enforce_configured_scopes
+
+ # Change the way client credentials are retrieved from the request object.
+ # By default it retrieves first from the `HTTP_AUTHORIZATION` header, then
+ # falls back to the `:client_id` and `:client_secret` params from the `params` object.
+ # Check out https://github.com/doorkeeper-gem/doorkeeper/wiki/Changing-how-clients-are-authenticated
+ # for more information on customization
+ #
+ # client_credentials :from_basic, :from_params
+
+ # Change the way access token is authenticated from the request object.
+ # By default it retrieves first from the `HTTP_AUTHORIZATION` header, then
+ # falls back to the `:access_token` or `:bearer_token` params from the `params` object.
+ # Check out https://github.com/doorkeeper-gem/doorkeeper/wiki/Changing-how-clients-are-authenticated
+ # for more information on customization
+
+ access_token_methods :from_bearer_authorization
+
+ # Forces the usage of the HTTPS protocol in non-native redirect uris (enabled
+ # by default in non-development environments). OAuth2 delegates security in
+ # communication to the HTTPS protocol so it is wise to keep this enabled.
+ #
+ # Callable objects such as proc, lambda, block or any object that responds to
+ # #call can be used in order to allow conditional checks (to allow non-SSL
+ # redirects to localhost for example).
+
+ force_ssl_in_redirect_uri do |uri|
+ !Rails.env.development? && uri.host != "127.0.0.1"
+ end
+
+ # Specify what redirect URI's you want to block during Application creation.
+ # Any redirect URI is whitelisted by default.
+ #
+ # You can use this option in order to forbid URI's with 'javascript' scheme
+ # for example.
+ #
+ # forbid_redirect_uri { |uri| uri.scheme.to_s.downcase == 'javascript' }
+
+ # Allows to set blank redirect URIs for Applications in case Doorkeeper configured
+ # to use URI-less OAuth grant flows like Client Credentials or Resource Owner
+ # Password Credentials. The option is on by default and checks configured grant
+ # types, but you **need** to manually drop `NOT NULL` constraint from `redirect_uri`
+ # column for `oauth_applications` database table.
+ #
+ # You can completely disable this feature with:
+ #
+ # allow_blank_redirect_uri false
+ #
+ # Or you can define your custom check:
+ #
+ # allow_blank_redirect_uri do |grant_flows, client|
+ # client.superapp?
+ # end
+
+ # Specify how authorization errors should be handled.
+ # By default, doorkeeper renders json errors when access token
+ # is invalid, expired, revoked or has invalid scopes.
+ #
+ # If you want to render error response yourself (i.e. rescue exceptions),
+ # set +handle_auth_errors+ to `:raise` and rescue Doorkeeper::Errors::InvalidToken
+ # or following specific errors:
+ #
+ # Doorkeeper::Errors::TokenForbidden, Doorkeeper::Errors::TokenExpired,
+ # Doorkeeper::Errors::TokenRevoked, Doorkeeper::Errors::TokenUnknown
+ #
+ # handle_auth_errors :raise
+
+ # Customize token introspection response.
+ # Allows to add your own fields to default one that are required by the OAuth spec
+ # for the introspection response. It could be `sub`, `aud` and so on.
+ # This configuration option can be a proc, lambda or any Ruby object responds
+ # to `.call` method and result of it's invocation must be a Hash.
+ #
+ # custom_introspection_response do |token, context|
+ # {
+ # "sub": "Z5O3upPC88QrAjx00dis",
+ # "aud": "https://protected.example.net/resource",
+ # "username": User.find(token.resource_owner_id).username
+ # }
+ # end
+ #
+ # or
+ #
+ # custom_introspection_response CustomIntrospectionResponder
+
+ # Specify what grant flows are enabled in array of Strings. The valid
+ # strings and the flows they enable are:
+ #
+ # "authorization_code" => Authorization Code Grant Flow
+ # "implicit" => Implicit Grant Flow
+ # "password" => Resource Owner Password Credentials Grant Flow
+ # "client_credentials" => Client Credentials Grant Flow
+ #
+ # If not specified, Doorkeeper enables authorization_code and
+ # client_credentials.
+ #
+ # implicit and password grant flows have risks that you should understand
+ # before enabling:
+ # http://tools.ietf.org/html/rfc6819#section-4.4.2
+ # http://tools.ietf.org/html/rfc6819#section-4.4.3
+
+ grant_flows %w[authorization_code]
+
+ # Allows to customize OAuth grant flows that +each+ application support.
+ # You can configure a custom block (or use a class respond to `#call`) that must
+ # return `true` in case Application instance supports requested OAuth grant flow
+ # during the authorization request to the server. This configuration +doesn't+
+ # set flows per application, it only allows to check if application supports
+ # specific grant flow.
+ #
+ # For example you can add an additional database column to `oauth_applications` table,
+ # say `t.array :grant_flows, default: []`, and store allowed grant flows that can
+ # be used with this application there. Then when authorization requested Doorkeeper
+ # will call this block to check if specific Application (passed with client_id and/or
+ # client_secret) is allowed to perform the request for the specific grant type
+ # (authorization, password, client_credentials, etc).
+ #
+ # Example of the block:
+ #
+ # ->(flow, client) { client.grant_flows.include?(flow) }
+ #
+ # In case this option invocation result is `false`, Doorkeeper server returns
+ # :unauthorized_client error and stops the request.
+ #
+ # @param allow_grant_flow_for_client [Proc] Block or any object respond to #call
+ # @return [Boolean] `true` if allow or `false` if forbid the request
+ #
+ # allow_grant_flow_for_client do |grant_flow, client|
+ # # `grant_flows` is an Array column with grant
+ # # flows that application supports
+ #
+ # client.grant_flows.include?(grant_flow)
+ # end
+
+ # If you need arbitrary Resource Owner-Client authorization you can enable this option
+ # and implement the check your need. Config option must respond to #call and return
+ # true in case resource owner authorized for the specific application or false in other
+ # cases.
+ #
+ # Be default all Resource Owners are authorized to any Client (application).
+ #
+ # authorize_resource_owner_for_client do |client, resource_owner|
+ # resource_owner.admin? || client.owners_whitelist.include?(resource_owner)
+ # end
+
+ # Hook into the strategies' request & response life-cycle in case your
+ # application needs advanced customization or logging:
+ #
+ # before_successful_strategy_response do |request|
+ # puts "BEFORE HOOK FIRED! #{request}"
+ # end
+ #
+ # after_successful_strategy_response do |request, response|
+ # puts "AFTER HOOK FIRED! #{request}, #{response}"
+ # end
+
+ # Hook into Authorization flow in order to implement Single Sign Out
+ # or add any other functionality. Inside the block you have an access
+ # to `controller` (authorizations controller instance) and `context`
+ # (Doorkeeper::OAuth::Hooks::Context instance) which provides pre auth
+ # or auth objects with issued token based on hook type (before or after).
+ #
+ # before_successful_authorization do |controller, context|
+ # Rails.logger.info(controller.request.params.inspect)
+ #
+ # Rails.logger.info(context.pre_auth.inspect)
+ # end
+ #
+ # after_successful_authorization do |controller, context|
+ # controller.session[:logout_urls] <<
+ # Doorkeeper::Application
+ # .find_by(controller.request.params.slice(:redirect_uri))
+ # .logout_uri
+ #
+ # Rails.logger.info(context.auth.inspect)
+ # Rails.logger.info(context.issued_token)
+ # end
+
+ # Under some circumstances you might want to have applications auto-approved,
+ # so that the user skips the authorization step.
+ # For example if dealing with a trusted application.
+
+ skip_authorization do |_, client|
+ client.scopes.include?("skip_authorization")
+ end
+
+ # Configure custom constraints for the Token Introspection request.
+ # By default this configuration option allows to introspect a token by another
+ # token of the same application, OR to introspect the token that belongs to
+ # authorized client (from authenticated client) OR when token doesn't
+ # belong to any client (public token). Otherwise requester has no access to the
+ # introspection and it will return response as stated in the RFC.
+ #
+ # Block arguments:
+ #
+ # @param token [Doorkeeper::AccessToken]
+ # token to be introspected
+ #
+ # @param authorized_client [Doorkeeper::Application]
+ # authorized client (if request is authorized using Basic auth with
+ # Client Credentials for example)
+ #
+ # @param authorized_token [Doorkeeper::AccessToken]
+ # Bearer token used to authorize the request
+ #
+ # In case the block returns `nil` or `false` introspection responses with 401 status code
+ # when using authorized token to introspect, or you'll get 200 with { "active": false } body
+ # when using authorized client to introspect as stated in the
+ # RFC 7662 section 2.2. Introspection Response.
+ #
+ # Using with caution:
+ # Keep in mind that these three parameters pass to block can be nil as following case:
+ # `authorized_client` is nil if and only if `authorized_token` is present, and vice versa.
+ # `token` will be nil if and only if `authorized_token` is present.
+ # So remember to use `&` or check if it is present before calling method on
+ # them to make sure you doesn't get NoMethodError exception.
+ #
+ # You can define your custom check:
+ #
+ # allow_token_introspection do |token, authorized_client, authorized_token|
+ # if authorized_token
+ # # customize: require `introspection` scope
+ # authorized_token.application == token&.application ||
+ # authorized_token.scopes.include?("introspection")
+ # elsif token.application
+ # # `protected_resource` is a new database boolean column, for example
+ # authorized_client == token.application || authorized_client.protected_resource?
+ # else
+ # # public token (when token.application is nil, token doesn't belong to any application)
+ # true
+ # end
+ # end
+ #
+ # Or you can completely disable any token introspection:
+ #
+ # allow_token_introspection false
+ #
+ # If you need to block the request at all, then configure your routes.rb or web-server
+ # like nginx to forbid the request.
+
+ # WWW-Authenticate Realm (default: "Doorkeeper").
+ #
+ # realm "Doorkeeper"
end
projects / rails.git / blobdiff