class Changeset < ActiveRecord::Base
- require 'xml/libxml'
+ require "xml/libxml"
- belongs_to :user
+ belongs_to :user, :counter_cache => true
+
+ has_many :changeset_tags
- has_many :changeset_tags, :foreign_key => 'id'
-
has_many :nodes
has_many :ways
has_many :relations
has_many :old_nodes
has_many :old_ways
has_many :old_relations
-
- validates_presence_of :id, :on => :update
- validates_presence_of :user_id, :created_at, :closed_at, :num_changes
- validates_uniqueness_of :id
- validates_numericality_of :id, :on => :update, :integer_only => true
- validates_numericality_of :min_lat, :max_lat, :min_lon, :max_lat, :allow_nil => true, :integer_only => true
- validates_numericality_of :user_id, :integer_only => true
- validates_numericality_of :num_changes, :integer_only => true, :greater_than_or_equal_to => 0
- validates_associated :user
+
+ has_many :comments, -> { where(:visible => true).order(:created_at) }, :class_name => "ChangesetComment"
+ has_and_belongs_to_many :subscribers, :class_name => "User", :join_table => "changesets_subscribers", :association_foreign_key => "subscriber_id"
+
+ validates :id, :uniqueness => true, :presence => { :on => :update },
+ :numericality => { :on => :update, :integer_only => true }
+ validates :user_id, :presence => true,
+ :numericality => { :integer_only => true }
+ validates :num_changes, :presence => true,
+ :numericality => { :integer_only => true,
+ :greater_than_or_equal_to => 0 }
+ validates :created_at, :closed_at, :presence => true
+ validates :min_lat, :max_lat, :min_lon, :max_lat, :allow_nil => true,
+ :numericality => { :integer_only => true }
+
+ before_save :update_closed_at
# over-expansion factor to use when updating the bounding box
EXPAND = 0.1
IDLE_TIMEOUT = 1.hour
# Use a method like this, so that we can easily change how we
- # determine whether a changeset is open, without breaking code in at
+ # determine whether a changeset is open, without breaking code in at
# least 6 controllers
def is_open?
# a changeset is open (that is, it will accept further changes) when
# it has not yet run out of time and its capacity is small enough.
# note that this may not be a hard limit - due to timing changes and
- # concurrency it is possible that some changesets may be slightly
+ # concurrency it is possible that some changesets may be slightly
# longer than strictly allowed or have slightly more changes in them.
- return ((closed_at > Time.now) and (num_changes <= MAX_ELEMENTS))
+ ((closed_at > Time.now.getutc) && (num_changes <= MAX_ELEMENTS))
end
def set_closed_time_now
- if is_open?
- self.closed_at = Time.now
+ self.closed_at = Time.now.getutc if is_open?
+ end
+
+ def self.from_xml(xml, create = false)
+ p = XML::Parser.string(xml, :options => XML::Parser::Options::NOERROR)
+ doc = p.parse
+
+ doc.find("//osm/changeset").each do |pt|
+ return Changeset.from_xml_node(pt, create)
end
+ fail OSM::APIBadXMLError.new("changeset", xml, "XML doesn't contain an osm/changeset element.")
+ rescue LibXML::XML::Error, ArgumentError => ex
+ raise OSM::APIBadXMLError.new("changeset", xml, ex.message)
end
-
- def self.from_xml(xml, create=false)
- begin
- p = XML::Parser.new
- p.string = xml
- doc = p.parse
-
- cs = Changeset.new
-
- doc.find('//osm/changeset').each do |pt|
- if create
- cs.created_at = Time.now
- # initial close time is 1h ahead, but will be increased on each
- # modification.
- cs.closed_at = Time.now + IDLE_TIMEOUT
- # initially we have no changes in a changeset
- cs.num_changes = 0
- end
-
- pt.find('tag').each do |tag|
- cs.add_tag_keyval(tag['k'], tag['v'])
- end
- end
- rescue Exception => ex
- cs = nil
+
+ def self.from_xml_node(pt, create = false)
+ cs = Changeset.new
+ if create
+ cs.created_at = Time.now.getutc
+ # initial close time is 1h ahead, but will be increased on each
+ # modification.
+ cs.closed_at = cs.created_at + IDLE_TIMEOUT
+ # initially we have no changes in a changeset
+ cs.num_changes = 0
+ end
+
+ pt.find("tag").each do |tag|
+ fail OSM::APIBadXMLError.new("changeset", pt, "tag is missing key") if tag["k"].nil?
+ fail OSM::APIBadXMLError.new("changeset", pt, "tag is missing value") if tag["v"].nil?
+ cs.add_tag_keyval(tag["k"], tag["v"])
end
- return cs
+ cs
end
##
# returns the bounding box of the changeset. it is possible that some
# or all of the values will be nil, indicating that they are undefined.
def bbox
- @bbox ||= [ min_lon, min_lat, max_lon, max_lat ]
+ @bbox ||= BoundingBox.new(min_lon, min_lat, max_lon, max_lat)
+ end
+
+ def has_valid_bbox?
+ bbox.complete?
end
##
- # expand the bounding box to include the given bounding box. also,
+ # expand the bounding box to include the given bounding box. also,
# expand a little bit more in the direction of the expansion, so that
- # further expansions may be unnecessary. this is an optimisation
+ # further expansions may be unnecessary. this is an optimisation
# suggested on the wiki page by kleptog.
- def update_bbox!(array)
- # ensure that bbox is cached and has no nils in it. if there are any
- # nils, just use the bounding box update to write over them.
- @bbox = bbox.zip(array).collect { |a, b| a.nil? ? b : a }
-
- # FIXME - this looks nasty and violates DRY... is there any prettier
- # way to do this?
- @bbox[0] = array[0] + EXPAND * (@bbox[0] - @bbox[2]) if array[0] < @bbox[0]
- @bbox[1] = array[1] + EXPAND * (@bbox[1] - @bbox[3]) if array[1] < @bbox[1]
- @bbox[2] = array[2] + EXPAND * (@bbox[2] - @bbox[0]) if array[2] > @bbox[2]
- @bbox[3] = array[3] + EXPAND * (@bbox[3] - @bbox[1]) if array[3] > @bbox[3]
+ def update_bbox!(bbox_update)
+ bbox.expand!(bbox_update, EXPAND)
# update active record. rails 2.1's dirty handling should take care of
# whether this object needs saving or not.
- self.min_lon, self.min_lat, self.max_lon, self.max_lat = @bbox
+ self.min_lon, self.min_lat, self.max_lon, self.max_lat = @bbox.to_a if bbox.complete?
end
##
self.num_changes += elements
end
- def tags_as_hash
- return tags
- end
-
def tags
unless @tags
@tags = {}
- self.changeset_tags.each do |tag|
+ changeset_tags.each do |tag|
@tags[tag.k] = tag.v
end
end
@tags
end
- def tags=(t)
- @tags = t
- end
+ attr_writer :tags
def add_tag_keyval(k, v)
- @tags = Hash.new unless @tags
+ @tags = {} unless @tags
+
+ # duplicate tags are now forbidden, so we can't allow values
+ # in the hash to be overwritten.
+ fail OSM::APIDuplicateTagsError.new("changeset", id, k) if @tags.include? k
+
@tags[k] = v
end
def save_with_tags!
- t = Time.now
-
# do the changeset update and the changeset tags update in the
# same transaction to ensure consistency.
Changeset.transaction do
- # set the auto-close time to be one hour in the future unless
- # that would make it more than 24h long, in which case clip to
- # 24h, as this has been decided is a reasonable time limit.
- if (closed_at - created_at) > (MAX_TIME_OPEN - IDLE_TIMEOUT)
- self.closed_at = created_at + MAX_TIME_OPEN
- else
- self.closed_at = Time.now + IDLE_TIMEOUT
- end
- self.save!
+ save!
tags = self.tags
- ChangesetTag.delete_all(['id = ?', self.id])
+ ChangesetTag.delete_all(:changeset_id => id)
- tags.each do |k,v|
+ tags.each do |k, v|
tag = ChangesetTag.new
+ tag.changeset_id = id
tag.k = k
tag.v = v
- tag.id = self.id
tag.save!
end
end
end
-
- def to_xml
+
+ ##
+ # set the auto-close time to be one hour in the future unless
+ # that would make it more than 24h long, in which case clip to
+ # 24h, as this has been decided is a reasonable time limit.
+ def update_closed_at
+ if is_open?
+ self.closed_at = if (closed_at - created_at) > (MAX_TIME_OPEN - IDLE_TIMEOUT)
+ created_at + MAX_TIME_OPEN
+ else
+ Time.now.getutc + IDLE_TIMEOUT
+ end
+ end
+ end
+
+ def to_xml(include_discussion = false)
doc = OSM::API.new.get_xml_doc
- doc.root << to_xml_node()
- return doc
+ doc.root << to_xml_node(nil, include_discussion)
+ doc
end
-
- def to_xml_node(user_display_name_cache = nil)
- el1 = XML::Node.new 'changeset'
- el1['id'] = self.id.to_s
+
+ def to_xml_node(user_display_name_cache = nil, include_discussion = false)
+ el1 = XML::Node.new "changeset"
+ el1["id"] = id.to_s
user_display_name_cache = {} if user_display_name_cache.nil?
- if user_display_name_cache and user_display_name_cache.key?(self.user_id)
+ if user_display_name_cache && user_display_name_cache.key?(user_id)
# use the cache if available
- elsif self.user.data_public?
- user_display_name_cache[self.user_id] = self.user.display_name
+ elsif user.data_public?
+ user_display_name_cache[user_id] = user.display_name
else
- user_display_name_cache[self.user_id] = nil
+ user_display_name_cache[user_id] = nil
end
- el1['user'] = user_display_name_cache[self.user_id] unless user_display_name_cache[self.user_id].nil?
- el1['uid'] = self.user_id.to_s if self.user.data_public?
+ el1["user"] = user_display_name_cache[user_id] unless user_display_name_cache[user_id].nil?
+ el1["uid"] = user_id.to_s if user.data_public?
- self.tags.each do |k,v|
- el2 = XML::Node.new('tag')
- el2['k'] = k.to_s
- el2['v'] = v.to_s
+ tags.each do |k, v|
+ el2 = XML::Node.new("tag")
+ el2["k"] = k.to_s
+ el2["v"] = v.to_s
+ el1 << el2
+ end
+
+ el1["created_at"] = created_at.xmlschema
+ el1["closed_at"] = closed_at.xmlschema unless is_open?
+ el1["open"] = is_open?.to_s
+
+ bbox.to_unscaled.add_bounds_to(el1, "_") if bbox.complete?
+
+ el1["comments_count"] = comments.count.to_s
+
+ if include_discussion
+ el2 = XML::Node.new("discussion")
+ comments.includes(:author).each do |comment|
+ el3 = XML::Node.new("comment")
+ el3["date"] = comment.created_at.xmlschema
+ el3["uid"] = comment.author.id.to_s if comment.author.data_public?
+ el3["user"] = comment.author.display_name.to_s if comment.author.data_public?
+ el4 = XML::Node.new("text")
+ el4.content = comment.body.to_s
+ el3 << el4
+ el2 << el3
+ end
el1 << el2
end
-
- el1['created_at'] = self.created_at.xmlschema
- el1['closed_at'] = self.closed_at.xmlschema unless is_open?
- el1['open'] = is_open?.to_s
-
- el1['min_lon'] = (bbox[0].to_f / GeoRecord::SCALE).to_s unless bbox[0].nil?
- el1['min_lat'] = (bbox[1].to_f / GeoRecord::SCALE).to_s unless bbox[1].nil?
- el1['max_lon'] = (bbox[2].to_f / GeoRecord::SCALE).to_s unless bbox[2].nil?
- el1['max_lat'] = (bbox[3].to_f / GeoRecord::SCALE).to_s unless bbox[3].nil?
-
+
# NOTE: changesets don't include the XML of the changes within them,
# they are just structures for tagging. to get the osmChange of a
# changeset, see the download method of the controller.
- return el1
+ el1
end
##
# bounding box, only the tags of the changeset.
def update_from(other, user)
# ensure that only the user who opened the changeset may modify it.
- unless user.id == self.user_id
- raise OSM::APIUserChangesetMismatchError
- end
-
+ fail OSM::APIUserChangesetMismatchError.new unless user.id == user_id
+
# can't change a closed changeset
- unless is_open?
- raise OSM::APIChangesetAlreadyClosedError.new(self)
- end
+ fail OSM::APIChangesetAlreadyClosedError.new(self) unless is_open?
# copy the other's tags
self.tags = other.tags