# Installation
-These instructions are designed for setting up The Rails Port for development and testing.
+These instructions are designed for setting up `openstreetmap-website` for development and testing.
If you want to deploy the software for your own project, then see the notes at the end.
You can install the software directly on your machine, which is the traditional and probably best-supported approach. However, there
* **Vagrant** This installs the software into a virtual machine. For Vagrant instructions see [VAGRANT.md](VAGRANT.md).
* **Docker** This installs the software using containerization. For Docker instructions see [DOCKER.md](DOCKER.md).
-These instructions are based on Ubuntu 20.04 LTS, which is the platform used by the OSMF servers.
+These instructions are based on Ubuntu 24.04 LTS, which is the platform used by the OSMF servers.
The instructions also work, with only minor amendments, for all other current Ubuntu releases, Fedora and MacOSX
-We don't recommend attempting to develop or deploy this software on Windows. If you need to use Windows, then try developing this software using Ubuntu in a virtual machine, or use [Vagrant](VAGRANT.md).
+We don't recommend attempting to develop or deploy this software on Windows. Some Ruby gems may not be supported. If you need to use Windows the easiest solutions in order are [Docker](DOCKER.md), [Vagrant](VAGRANT.md), and Ubuntu in a virtual machine.
## Dependencies
## Minimum requirements
-* Ruby 2.7+
-* PostgreSQL 9.1+
-* ImageMagick
+* Ruby 3.1+
+* PostgreSQL 13+
* Bundler (see note below about [developer Ruby setup](#rbenv))
* Javascript Runtime
-These can be installed on Ubuntu 20.04 or later with:
+These can be installed on Ubuntu 24.04 or later with:
```
sudo apt-get update
-sudo apt-get install ruby2.7 libruby2.7 ruby2.7-dev \
- libmagickwand-dev libxml2-dev libxslt1-dev nodejs \
- apache2 apache2-dev build-essential git-core firefox-geckodriver \
+sudo apt-get install ruby ruby-dev ruby-bundler \
+ libvips-dev libxml2-dev libxslt1-dev nodejs \
+ build-essential git-core \
postgresql postgresql-contrib libpq-dev libsasl2-dev \
- imagemagick libffi-dev libgd-dev libarchive-dev libbz2-dev yarnpkg
-sudo gem2.7 install bundler
+ libffi-dev libgd-dev libarchive-dev libyaml-dev libbz2-dev npm
+sudo npm install --global yarn
```
### Alternative platforms
libxml2-devel nodejs \
gcc gcc-c++ git \
postgresql postgresql-server postgresql-contrib libpq-devel \
- perl-podlators ImageMagick libffi-devel gd-devel libarchive-devel \
- bzip2-devel nodejs-yarn
+ perl-podlators libffi-devel gd-devel libarchive-devel \
+ libyaml-devel bzip2-devel nodejs-yarn vips-devel
```
If you didn't already have PostgreSQL installed then create a PostgreSQL instance and start the server:
* Install Homebrew from https://brew.sh/
* Install the latest version of Ruby: `brew install ruby`
-* Install other dependencies: `brew install imagemagick libxml2 gd yarn pngcrush optipng pngquant jhead jpegoptim gifsicle svgo`
+* Install other dependencies: `brew install libxml2 gd yarn pngcrush optipng pngquant jhead jpegoptim gifsicle svgo advancecomp vips`
* Install Bundler: `gem install bundler` (you might need to `sudo gem install bundler` if you get an error about permissions - or see note below about [developer Ruby setup](#rbenv))
You will need to tell `bundler` that `libxml2` is installed in a Homebrew location. If it uses the system-installed one then you will get errors installing the `libxml-ruby` gem later on<a name="macosx-bundle-config"></a>.
If you want to run the tests, you need `geckodriver` as well:
```
-brew tap homebrew/cask
-brew cask install geckodriver
+brew install geckodriver
```
Note that OS X does not have a /home directory by default, so if you are using the GPX functions, you will need to change the directories specified in config/application.yml.
## Ruby gems
-We use [Bundler](http://gembundler.com/) to manage the rubygems required for the project.
+We use [Bundler](https://bundler.io/) to manage the rubygems required for the project.
```
cd openstreetmap-website
We use [Yarn](https://yarnpkg.com/) to manage the Node.js modules required for the project.
```
-bundle exec rake yarn:install
+bundle exec bin/yarn install
```
## Prepare local settings file
## Storage setup
-The Rails port needs to be configured with an object storage facility - for
+`openstreetmap-website` needs to be configured with an object storage facility - for
development and testing purposes you can use the example configuration:
```
## Database setup
-The Rails Port uses three databases - one for development, one for testing, and one for production. The database-specific configuration
+`openstreetmap-website` uses three databases - one for development, one for testing, and one for production. The database-specific configuration
options are stored in `config/database.yml`, which we need to create from the example template.
```
To create the three databases - for development, testing and production - run:
```
-bundle exec rake db:create
-```
-
-### PostgreSQL Btree-gist Extension
-
-We need to load the `btree-gist` extension, which is needed for showing changesets on the history tab.
-
-```
-psql -d openstreetmap -c "CREATE EXTENSION btree_gist"
-```
-
-### PostgreSQL Functions
-
-We need to install some special functions into the PostgreSQL database:
-
-```
-psql -d openstreetmap -f db/functions/functions.sql
+bundle exec rails db:create
```
### Database structure
To create all the tables, indexes and constraints, run:
```
-bundle exec rake db:migrate
+bundle exec rails db:migrate
```
## Running the tests
After installing this software, you may need to carry out some [configuration steps](CONFIGURE.md), depending on your tasks.
-# Installing compiled shared library database functions (optional)
-
-There are special database functions required by a (little-used) API call, the migrations and diff replication. The former two are provided as *either* pure SQL functions or a compiled shared library. The SQL versions are installed as part of the recommended install procedure above and the shared library versions are recommended only if you are running a production server and need the diff replication functionality.
-
-If you aren't sure which you need, stick with the SQL versions.
-
-Before installing the functions, it's necessary to install the PostgreSQL server development packages. On Ubuntu this means:
-
-```
-sudo apt-get install postgresql-server-dev-all
-```
-
-On Fedora:
-
-```
-sudo dnf install postgresql-devel
-```
-
-The library then needs compiling.
-
-```
-cd db/functions
-make libpgosm.so
-cd ../..
-```
-
-If you previously installed the SQL versions of these functions, we'll need to delete those before adding the new ones:
-
-```
-psql -d openstreetmap -c "DROP FUNCTION IF EXISTS tile_for_point"
-```
-
-Then we create the functions within each database. We're using `pwd` to substitute in the current working directory, since PostgreSQL needs the full path.
-
-```
-psql -d openstreetmap -c "CREATE FUNCTION tile_for_point(int4, int4) RETURNS int8 AS '`pwd`/db/functions/libpgosm', 'tile_for_point' LANGUAGE C STRICT"
-psql -d openstreetmap -c "CREATE FUNCTION xid_to_int4(xid) RETURNS int4 AS '`pwd`/db/functions/libpgosm', 'xid_to_int4' LANGUAGE C STRICT"
-```
-
# Ruby development install and versions<a name="rbenv"></a> (optional)
-For simplicity, this document explains how to install all the website dependencies as "system" dependencies. While this is simpler, and usually faster, you might want more control over the process or the ability to install multiple different versions of software alongside eachother. For many developers, [`rbenv`](https://github.com/rbenv/rbenv) is the easiest way to manage multiple different Ruby versions on the same computer - with the added advantage that the installs are all in your home directory, so you don't need administrator permissions.
+For simplicity, this document explains how to install all the website dependencies as "system" dependencies. While this is simpler, and usually faster, you might want more control over the process or the ability to install multiple different versions of software alongside each other. For many developers, [`rbenv`](https://github.com/rbenv/rbenv) is the easiest way to manage multiple different Ruby versions on the same computer - with the added advantage that the installs are all in your home directory, so you don't need administrator permissions.
If you choose to install Ruby and Bundler via `rbenv`, then you do not need to install the system libraries for Ruby:
-* For Ubuntu, you do not need to install the following packages: `ruby2.7 libruby2.7 ruby2.7-dev bundler`,
+* For Ubuntu, you do not need to install the following packages: `ruby ruby-dev ruby-bundler`,
* For Fedora, you do not need to install the following packages: `ruby ruby-devel rubygem-rdoc rubygem-bundler rubygems`
* For MacOSX, you do not need to `brew install ruby` - but make sure you've installed a version of Ruby using `rbenv` before running `gem install bundler`!
projects / rails.git / blobdiff