Update bundle

[rails.git] / app / controllers / api_controller.rb

diff --git a/app/controllers/api_controller.rb b/app/controllers/api_controller.rb
index f0ba325682c567f400c94d6bd0d398f1f9b9f804..df7cfe93be97d9ffa704db88d759be75523ffc32 100644 (file)
--- a/app/controllers/api_controller.rb
+++ b/app/controllers/api_controller.rb
@@ -1,292 +1,88 @@
 class ApiController < ApplicationController
 class ApiController < ApplicationController

+  skip_before_action :verify_authenticity_token

 
 

-  session :off
-  before_filter :check_read_availability, :except => [:capabilities]
-  after_filter :compress_output
+  private

 
 

-  # Help methods for checking boundary sanity and area size
-  include MapBoundary
+  def authorize(realm = "Web Password", errormessage = "Couldn't authenticate you")
+    # make the current_user object from any auth sources we have
+    setup_user_auth

 
 

-  #COUNT is the number of map requests to allow before exiting and starting a new process
-  @@count = COUNT
-
-  # The maximum area you're allowed to request, in square degrees
-  MAX_REQUEST_AREA = APP_CONFIG['max_request_area']
-
-  # Number of GPS trace/trackpoints returned per-page
-  TRACEPOINTS_PER_PAGE = APP_CONFIG['tracepoints_per_page']
-
-  # Get an XML response containing a list of tracepoints that have been uploaded
-  # within the specified bounding box, and in the specified page.
-  def trackpoints
-    @@count+=1
-    #retrieve the page number
-    page = params['page'].to_i
-    unless page
-        page = 0;
-    end
-
-    unless page >= 0
-        report_error("Page number must be greater than or equal to 0")
-        return
+    # handle authenticate pass/fail
+    unless current_user
+      # no auth, the user does not exist or the password was wrong
+      response.headers["WWW-Authenticate"] = "Basic realm=\"#{realm}\""
+      render :plain => errormessage, :status => :unauthorized
+      return false

     end
     end

-
-    offset = page * TRACEPOINTS_PER_PAGE
-
-    # Figure out the bbox
-    bbox = params['bbox']
-    unless bbox and bbox.count(',') == 3
-      report_error("The parameter bbox is required, and must be of the form min_lon,min_lat,max_lon,max_lat")
-      return
-    end
-
-    bbox = bbox.split(',')
-    min_lon, min_lat, max_lon, max_lat = sanitise_boundaries(bbox)
-    # check boundary is sane and area within defined
-    # see /config/application.yml
-    begin
-      check_boundaries(min_lon, min_lat, max_lon, max_lat)
-    rescue Exception => err
-      report_error(err.message)
-      return
-    end
-
-    # get all the points
-    points = Tracepoint.find_by_area(min_lat, min_lon, max_lat, max_lon, :offset => offset, :limit => TRACEPOINTS_PER_PAGE, :order => "timestamp DESC" )
-
-    doc = XML::Document.new
-    doc.encoding = XML::Encoding::UTF_8
-    root = XML::Node.new 'gpx'
-    root['version'] = '1.0'
-    root['creator'] = 'OpenStreetMap.org'
-    root['xmlns'] = "http://www.topografix.com/GPX/1/0/"
-    
-    doc.root = root
-
-    track = XML::Node.new 'trk'
-    doc.root << track
-
-    trkseg = XML::Node.new 'trkseg'
-    track << trkseg
-
-    points.each do |point|
-      trkseg << point.to_xml_node()
-    end
-
-    #exit when we have too many requests
-    if @@count > MAX_COUNT
-      render :text => doc.to_s, :content_type => "text/xml"
-      @@count = COUNT
-      exit!
-    end
-
-    response.headers["Content-Disposition"] = "attachment; filename=\"map.osm\""
-
-    render :text => doc.to_s, :content_type => "text/xml"

   end
 
   end
 

-  # This is probably the most common call of all. It is used for getting the 
-  # OSM data for a specified bounding box, usually for editing. First the
-  # bounding box (bbox) is checked to make sure that it is sane. All nodes 
-  # are searched, then all the ways that reference those nodes are found.
-  # All Nodes that are referenced by those ways are fetched and added to the list
-  # of nodes.
-  # Then all the relations that reference the already found nodes and ways are
-  # fetched. All the nodes and ways that are referenced by those ways are then 
-  # fetched. Finally all the xml is returned.
-  def map
-    GC.start
-    @@count+=1
-    # Figure out the bbox
-    bbox = params['bbox']
-
-    unless bbox and bbox.count(',') == 3
-      # alternatively: report_error(TEXT['boundary_parameter_required']
-      report_error("The parameter bbox is required, and must be of the form min_lon,min_lat,max_lon,max_lat")
-      return
-    end
-
-    bbox = bbox.split(',')
-
-    min_lon, min_lat, max_lon, max_lat = sanitise_boundaries(bbox)
-
-    # check boundary is sane and area within defined
-    # see /config/application.yml
-    begin
-      check_boundaries(min_lon, min_lat, max_lon, max_lat)
-    rescue Exception => err
-      report_error(err.message)
-      return
-    end
-
-    # FIXME um why is this area using a different order for the lat/lon from above???
-    @nodes = Node.find_by_area(min_lat, min_lon, max_lat, max_lon, :conditions => {:visible => true}, :limit => APP_CONFIG['max_number_of_nodes']+1)
-    # get all the nodes, by tag not yet working, waiting for change from NickB
-    # need to be @nodes (instance var) so tests in /spec can be performed
-    #@nodes = Node.search(bbox, params[:tag])
-
-    node_ids = @nodes.collect(&:id)
-    if node_ids.length > APP_CONFIG['max_number_of_nodes']
-      report_error("You requested too many nodes (limit is #{APP_CONFIG['max_number_of_nodes']}). Either request a smaller area, or use planet.osm")
-      return
-    end
-    if node_ids.length == 0
-      render :text => "<osm version='#{API_VERSION}' generator='#{GENERATOR}'></osm>", :content_type => "text/xml"
-      return
-    end
-
-    doc = OSM::API.new.get_xml_doc
-
-    # add bounds
-    bounds = XML::Node.new 'bounds'
-    bounds['minlat'] = min_lat.to_s
-    bounds['minlon'] = min_lon.to_s
-    bounds['maxlat'] = max_lat.to_s
-    bounds['maxlon'] = max_lon.to_s
-    doc.root << bounds
-
-    # get ways
-    # find which ways are needed
-    ways = Array.new
-    if node_ids.length > 0
-      way_nodes = WayNode.find_all_by_node_id(node_ids)
-      way_ids = way_nodes.collect { |way_node| way_node.id[0] }
-      ways = Way.find(way_ids)
-
-      list_of_way_nodes = ways.collect { |way|
-        way.way_nodes.collect { |way_node| way_node.node_id }
-      }
-      list_of_way_nodes.flatten!
-
+  def current_ability
+    # Use capabilities from the oauth token if it exists and is a valid access token
+    if Authenticator.new(self, [:token]).allow?
+      ApiAbility.new(nil).merge(ApiCapability.new(current_token))

     else
     else

-      list_of_way_nodes = Array.new
-    end
-
-    # - [0] in case some thing links to node 0 which doesn't exist. Shouldn't actually ever happen but it does. FIXME: file a ticket for this
-    nodes_to_fetch = (list_of_way_nodes.uniq - node_ids) - [0]
-
-    if nodes_to_fetch.length > 0
-      @nodes += Node.find(nodes_to_fetch)
-    end
-
-    visible_nodes = {}
-    user_display_name_cache = {}
-
-    @nodes.each do |node|
-      if node.visible?
-        doc.root << node.to_xml_node(user_display_name_cache)
-        visible_nodes[node.id] = node
-      end
-    end
-
-    way_ids = Array.new
-    ways.each do |way|
-      if way.visible?
-        doc.root << way.to_xml_node(visible_nodes, user_display_name_cache)
-        way_ids << way.id
-      end
-    end 
-
-    relations = Relation.find_for_nodes(visible_nodes.keys, :conditions => {:visible => true}) +
-                Relation.find_for_ways(way_ids, :conditions => {:visible => true})
-
-    # we do not normally return the "other" partners referenced by an relation, 
-    # e.g. if we return a way A that is referenced by relation X, and there's 
-    # another way B also referenced, that is not returned. But we do make 
-    # an exception for cases where an relation references another *relation*; 
-    # in that case we return that as well (but we don't go recursive here)
-    relations += Relation.find_for_relations(relations.collect { |r| r.id }, :conditions => {:visible => true})
-
-    # this "uniq" may be slightly inefficient; it may be better to first collect and output
-    # all node-related relations, then find the *not yet covered* way-related ones etc.
-    relations.uniq.each do |relation|
-      doc.root << relation.to_xml_node(user_display_name_cache)
-    end
-
-    response.headers["Content-Disposition"] = "attachment; filename=\"map.osm\""
-
-    render :text => doc.to_s, :content_type => "text/xml"
-    
-    #exit when we have too many requests
-    if @@count > MAX_COUNT
-      @@count = COUNT
-      
-      exit!
+      ApiAbility.new(current_user)

     end
   end
 
     end
   end
 

-  # Get a list of the tiles that have changed within a specified time
-  # period
-  def changes
-    zoom = (params[:zoom] || '12').to_i
-
-    if params.include?(:start) and params.include?(:end)
-      starttime = Time.parse(params[:start])
-      endtime = Time.parse(params[:end])
+  def deny_access(_exception)
+    if current_token
+      set_locale
+      report_error t("oauth.permissions.missing"), :forbidden
+    elsif current_user
+      head :forbidden

     else
     else

-      hours = (params[:hours] || '1').to_i.hours
-      endtime = Time.now.getutc
-      starttime = endtime - hours
+      realm = "Web Password"
+      errormessage = "Couldn't authenticate you"
+      response.headers["WWW-Authenticate"] = "Basic realm=\"#{realm}\""
+      render :plain => errormessage, :status => :unauthorized

     end
     end

+  end

 
 

-    if zoom >= 1 and zoom <= 16 and
-       endtime > starttime and endtime - starttime <= 24.hours
-      mask = (1 << zoom) - 1
-
-      tiles = Node.count(:conditions => ["timestamp BETWEEN ? AND ?", starttime, endtime],
-                         :group => "maptile_for_point(latitude, longitude, #{zoom})")
-
-      doc = OSM::API.new.get_xml_doc
-      changes = XML::Node.new 'changes'
-      changes["starttime"] = starttime.xmlschema
-      changes["endtime"] = endtime.xmlschema
-
-      tiles.each do |tile, count|
-        x = (tile.to_i >> zoom) & mask
-        y = tile.to_i & mask
-
-        t = XML::Node.new 'tile'
-        t["x"] = x.to_s
-        t["y"] = y.to_s
-        t["z"] = zoom.to_s
-        t["changes"] = count.to_s
+  def gpx_status
+    status = database_status
+    status = "offline" if status == "online" && Settings.status == "gpx_offline"
+    status
+  end

 
 

-        changes << t
+  ##
+  # sets up the current_user for use by other methods. this is mostly called
+  # from the authorize method, but can be called elsewhere if authorisation
+  # is optional.
+  def setup_user_auth
+    # try and setup using OAuth
+    unless Authenticator.new(self, [:token]).allow?
+      username, passwd = get_auth_data # parse from headers
+      # authenticate per-scheme
+      self.current_user = if username.nil?
+                            nil # no authentication provided - perhaps first connect (client should retry after 401)
+                          elsif username == "token"
+                            User.authenticate(:token => passwd) # preferred - random token for user from db, passed in basic auth
+                          else
+                            User.authenticate(:username => username, :password => passwd) # basic auth
+                          end
+    end
+
+    # have we identified the user?
+    if current_user
+      # check if the user has been banned
+      user_block = current_user.blocks.active.take
+      unless user_block.nil?
+        set_locale
+        if user_block.zero_hour?
+          report_error t("application.setup_user_auth.blocked_zero_hour"), :forbidden
+        else
+          report_error t("application.setup_user_auth.blocked"), :forbidden
+        end

       end
 
       end
 

-      doc.root << changes
-
-      render :text => doc.to_s, :content_type => "text/xml"
-    else
-      render :text => "Requested zoom is invalid, or the supplied start is after the end time, or the start duration is more than 24 hours", :status => :bad_request
+      # if the user hasn't seen the contributor terms then don't
+      # allow editing - they have to go to the web site and see
+      # (but can decline) the CTs to continue.
+      if !current_user.terms_seen && flash[:skip_terms].nil?
+        set_locale
+        report_error t("application.setup_user_auth.need_to_see_terms"), :forbidden
+      end

     end
   end
     end
   end

-
-  # External apps that use the api are able to query the api to find out some 
-  # parameters of the API. It currently returns: 
-  # * minimum and maximum API versions that can be used.
-  # * maximum area that can be requested in a bbox request in square degrees
-  # * number of tracepoints that are returned in each tracepoints page
-  def capabilities
-    doc = OSM::API.new.get_xml_doc
-
-    api = XML::Node.new 'api'
-    version = XML::Node.new 'version'
-    version['minimum'] = "#{API_VERSION}";
-    version['maximum'] = "#{API_VERSION}";
-    api << version
-    area = XML::Node.new 'area'
-    area['maximum'] = MAX_REQUEST_AREA.to_s;
-    api << area
-    tracepoints = XML::Node.new 'tracepoints'
-    tracepoints['per_page'] = APP_CONFIG['tracepoints_per_page'].to_s
-    api << tracepoints
-    waynodes = XML::Node.new 'waynodes'
-    waynodes['maximum'] = APP_CONFIG['max_number_of_way_nodes'].to_s
-    api << waynodes
-    
-    doc.root << api
-
-    render :text => doc.to_s, :content_type => "text/xml"
-  end

 end
 end