class ApiController < ApplicationController
- session :off
+ skip_before_filter :verify_authenticity_token
+ before_filter :check_api_readable, :except => [:capabilities]
+ before_filter :setup_user_auth, :only => [:permissions]
after_filter :compress_output
+ around_filter :api_call_handle_error, :api_call_timeout
- #COUNT is the number of map requests to allow before exiting and starting a new process
- @@count = COUNT
-
- # The maximum area you're allowed to request, in square degrees
- MAX_REQUEST_AREA = 0.25
-
-
- # Number of GPS trace/trackpoints returned per-page
- TRACEPOINTS_PER_PAGE = 5000
-
+ # Get an XML response containing a list of tracepoints that have been uploaded
+ # within the specified bounding box, and in the specified page.
def trackpoints
- @@count+=1
#retrieve the page number
- page = params['page'].to_i
- unless page
- page = 0;
- end
+ page = params['page'].to_s.to_i
unless page >= 0
report_error("Page number must be greater than or equal to 0")
offset = page * TRACEPOINTS_PER_PAGE
# Figure out the bbox
- bbox = params['bbox']
- unless bbox and bbox.count(',') == 3
- report_error("The parameter bbox is required, and must be of the form min_lon,min_lat,max_lon,max_lat")
- return
- end
-
- bbox = bbox.split(',')
-
- min_lon = bbox[0].to_f
- min_lat = bbox[1].to_f
- max_lon = bbox[2].to_f
- max_lat = bbox[3].to_f
-
- # check the bbox is sane
- unless min_lon <= max_lon
- report_error("The minimum longitude must be less than the maximum longitude, but it wasn't")
- return
- end
- unless min_lat <= max_lat
- report_error("The minimum latitude must be less than the maximum latitude, but it wasn't")
- return
- end
- unless min_lon >= -180 && min_lat >= -90 && max_lon <= 180 && max_lat <= 90
- report_error("The latitudes must be between -90 and 90, and longitudes between -180 and 180")
- return
- end
-
- # check the bbox isn't too large
- requested_area = (max_lat-min_lat)*(max_lon-min_lon)
- if requested_area > MAX_REQUEST_AREA
- report_error("The maximum bbox size is " + MAX_REQUEST_AREA.to_s + ", and your request was too large. Either request a smaller area, or use planet.osm")
+ # check boundary is sane and area within defined
+ # see /config/application.yml
+ begin
+ bbox = BoundingBox.from_bbox_params(params)
+ bbox.check_boundaries
+ bbox.check_size
+ rescue Exception => err
+ report_error(err.message)
return
end
# get all the points
- points = Tracepoint.find_by_area(min_lat, min_lon, max_lat, max_lon, :offset => offset, :limit => TRACEPOINTS_PER_PAGE, :order => "timestamp DESC" )
+ points = Tracepoint.bbox(bbox).offset(offset).limit(TRACEPOINTS_PER_PAGE).order("gpx_id DESC, trackid ASC, timestamp ASC")
doc = XML::Document.new
- doc.encoding = 'UTF-8'
+ doc.encoding = XML::Encoding::UTF_8
root = XML::Node.new 'gpx'
root['version'] = '1.0'
root['creator'] = 'OpenStreetMap.org'
- root['xmlns'] = "http://www.topografix.com/GPX/1/0/"
+ root['xmlns'] = "http://www.topografix.com/GPX/1/0"
doc.root = root
- track = XML::Node.new 'trk'
- doc.root << track
-
- trkseg = XML::Node.new 'trkseg'
- track << trkseg
+ # initialise these variables outside of the loop so that they
+ # stay in scope and don't get free'd up by the GC during the
+ # loop.
+ gpx_id = -1
+ trackid = -1
+ track = nil
+ trkseg = nil
+ anon_track = nil
+ anon_trkseg = nil
+ gpx_file = nil
+ timestamps = false
points.each do |point|
- trkseg << point.to_xml_node()
- end
+ if gpx_id != point.gpx_id
+ gpx_id = point.gpx_id
+ trackid = -1
+ gpx_file = Trace.find(gpx_id)
+
+ if gpx_file.trackable?
+ track = XML::Node.new 'trk'
+ doc.root << track
+ timestamps = true
+
+ if gpx_file.identifiable?
+ track << (XML::Node.new("name") << gpx_file.name)
+ track << (XML::Node.new("desc") << gpx_file.description)
+ track << (XML::Node.new("url") << url_for(:controller => 'trace', :action => 'view', :display_name => gpx_file.user.display_name, :id => gpx_file.id))
+ end
+ else
+ # use the anonymous track segment if the user hasn't allowed
+ # their GPX points to be tracked.
+ timestamps = false
+ if anon_track.nil?
+ anon_track = XML::Node.new 'trk'
+ doc.root << anon_track
+ end
+ track = anon_track
+ end
+ end
+
+ if trackid != point.trackid
+ if gpx_file.trackable?
+ trkseg = XML::Node.new 'trkseg'
+ track << trkseg
+ trackid = point.trackid
+ else
+ if anon_trkseg.nil?
+ anon_trkseg = XML::Node.new 'trkseg'
+ anon_track << anon_trkseg
+ end
+ trkseg = anon_trkseg
+ end
+ end
- #exit when we have too many requests
- if @@count > MAX_COUNT
- render :text => doc.to_s, :content_type => "text/xml"
- @@count = COUNT
- exit!
+ trkseg << point.to_xml_node(timestamps)
end
- render :text => doc.to_s, :content_type => "text/xml"
+ response.headers["Content-Disposition"] = "attachment; filename=\"tracks.gpx\""
+ render :text => doc.to_s, :content_type => "text/xml"
end
+ # This is probably the most common call of all. It is used for getting the
+ # OSM data for a specified bounding box, usually for editing. First the
+ # bounding box (bbox) is checked to make sure that it is sane. All nodes
+ # are searched, then all the ways that reference those nodes are found.
+ # All Nodes that are referenced by those ways are fetched and added to the list
+ # of nodes.
+ # Then all the relations that reference the already found nodes and ways are
+ # fetched. All the nodes and ways that are referenced by those ways are then
+ # fetched. Finally all the xml is returned.
def map
- GC.start
- @@count+=1
-
# Figure out the bbox
- bbox = params['bbox']
- unless bbox and bbox.count(',') == 3
- report_error("The parameter bbox is required, and must be of the form min_lon,min_lat,max_lon,max_lat")
- return
- end
-
- bbox = bbox.split(',')
-
- min_lon = bbox[0].to_f
- min_lat = bbox[1].to_f
- max_lon = bbox[2].to_f
- max_lat = bbox[3].to_f
-
- # check the bbox is sane
- unless min_lon <= max_lon
- report_error("The minimum longitude must be less than the maximum longitude, but it wasn't")
- return
- end
- unless min_lat <= max_lat
- report_error("The minimum latitude must be less than the maximum latitude, but it wasn't")
- return
- end
- unless min_lon >= -180 && min_lat >= -90 && max_lon <= 180 && max_lat <= 90
- report_error("The latitudes must be between -90 and 90, and longitudes between -180 and 180")
+ # check boundary is sane and area within defined
+ # see /config/application.yml
+ begin
+ bbox = BoundingBox.from_bbox_params(params)
+ bbox.check_boundaries
+ bbox.check_size
+ rescue Exception => err
+ report_error(err.message)
return
end
- # check the bbox isn't too large
- requested_area = (max_lat-min_lat)*(max_lon-min_lon)
- if requested_area > MAX_REQUEST_AREA
- report_error("The maximum bbox size is " + MAX_REQUEST_AREA.to_s +
- ", and your request was too large. Either request a smaller area, or use planet.osm")
- return
- end
-
- # get all the nodes
- nodes = Node.find(:all, :conditions => ['latitude BETWEEN ? AND ? AND longitude BETWEEN ? AND ? AND visible = 1', min_lat, max_lat, min_lon, max_lon])
-
- node_ids = nodes.collect {|node| node.id }
+ @nodes = Node.bbox(bbox).where(:visible => true).includes(:node_tags).limit(MAX_NUMBER_OF_NODES+1)
- if node_ids.length > 50_000
- report_error("You requested too many nodes (limit is 50,000). Either request a smaller area, or use planet.osm")
+ node_ids = @nodes.collect(&:id)
+ if node_ids.length > MAX_NUMBER_OF_NODES
+ report_error("You requested too many nodes (limit is #{MAX_NUMBER_OF_NODES}). Either request a smaller area, or use planet.osm")
return
end
-
if node_ids.length == 0
- render :text => "<osm version='0.5'></osm>", :content_type => "text/xml"
+ render :text => "<osm version='#{API_VERSION}' generator='#{GENERATOR}'></osm>", :content_type => "text/xml"
return
end
- relations = Array.new
-
doc = OSM::API.new.get_xml_doc
+ # add bounds
+ doc.root << bbox.add_bounds_to(XML::Node.new 'bounds')
+
# get ways
# find which ways are needed
ways = Array.new
if node_ids.length > 0
- way_nodes = WayNode.find_all_by_node_id(node_ids)
- way_ids = way_nodes.collect {|way_node| way_node.id }
- ways = Way.find(way_ids)
+ way_nodes = WayNode.where(:node_id => node_ids)
+ way_ids = way_nodes.collect { |way_node| way_node.id[0] }
+ ways = Way.preload(:way_nodes, :way_tags).find(way_ids)
list_of_way_nodes = ways.collect { |way|
- way.way_nodes.collect { |way_node| way_node.node_id }
+ way.way_nodes.collect { |way_node| way_node.node_id }
}
list_of_way_nodes.flatten!
nodes_to_fetch = (list_of_way_nodes.uniq - node_ids) - [0]
if nodes_to_fetch.length > 0
- nodes += Node.find(nodes_to_fetch)
+ @nodes += Node.includes(:node_tags).find(nodes_to_fetch)
end
visible_nodes = {}
+ changeset_cache = {}
user_display_name_cache = {}
- nodes.each do |node|
+ @nodes.each do |node|
if node.visible?
- doc.root << node.to_xml_node(user_display_name_cache)
+ doc.root << node.to_xml_node(changeset_cache, user_display_name_cache)
visible_nodes[node.id] = node
end
end
way_ids = Array.new
ways.each do |way|
if way.visible?
- doc.root << way.to_xml_node(visible_nodes, user_display_name_cache)
+ doc.root << way.to_xml_node(visible_nodes, changeset_cache, user_display_name_cache)
way_ids << way.id
end
end
- # collect relationships. currently done in one big block at the end;
- # may need to move this upwards if people want automatic completion of
- # relationships, i.e. deliver referenced objects like we do with ways...
- relations = Relation.find_by_sql("select e.* from current_relations e,current_relation_members em where " +
- "e.visible=1 and " +
- "em.id = e.id and em.member_type='node' and em.member_id in (#{visible_nodes.keys.join(',')})")
- relations += Relation.find_by_sql("select e.* from current_relations e,current_relation_members em where " +
- "e.visible=1 and " +
- "em.id = e.id and em.member_type='way' and em.member_id in (#{way_ids.join(',')})")
+ relations = Relation.nodes(visible_nodes.keys).visible +
+ Relation.ways(way_ids).visible
+
# we do not normally return the "other" partners referenced by an relation,
# e.g. if we return a way A that is referenced by relation X, and there's
# another way B also referenced, that is not returned. But we do make
# an exception for cases where an relation references another *relation*;
# in that case we return that as well (but we don't go recursive here)
- relation_ids = relations.collect { |relation| relation.id }
- if relation_ids.length > 0
- relations += Relation.find_by_sql("select e.* from current_relations e,current_relation_members em where " +
- "e.visible=1 and " +
- "em.id = e.id and em.member_type='relation' and em.member_id in (#{relation_ids.join(',')})")
- end
+ relations += Relation.relations(relations.collect { |r| r.id }).visible
# this "uniq" may be slightly inefficient; it may be better to first collect and output
# all node-related relations, then find the *not yet covered* way-related ones etc.
relations.uniq.each do |relation|
- doc.root << relation.to_xml_node(user_display_name_cache)
+ doc.root << relation.to_xml_node(nil, changeset_cache, user_display_name_cache)
end
+ response.headers["Content-Disposition"] = "attachment; filename=\"map.osm\""
+
render :text => doc.to_s, :content_type => "text/xml"
-
- #exit when we have too many requests
- if @@count > MAX_COUNT
- @@count = COUNT
-
- exit!
+ end
+
+ # Get a list of the tiles that have changed within a specified time
+ # period
+ def changes
+ zoom = (params[:zoom] || '12').to_i
+
+ if params.include?(:start) and params.include?(:end)
+ starttime = Time.parse(params[:start])
+ endtime = Time.parse(params[:end])
+ else
+ hours = (params[:hours] || '1').to_i.hours
+ endtime = Time.now.getutc
+ starttime = endtime - hours
+ end
+
+ if zoom >= 1 and zoom <= 16 and
+ endtime > starttime and endtime - starttime <= 24.hours
+ mask = (1 << zoom) - 1
+
+ tiles = Node.where(:timestamp => starttime .. endtime).group("maptile_for_point(latitude, longitude, #{zoom})").count
+
+ doc = OSM::API.new.get_xml_doc
+ changes = XML::Node.new 'changes'
+ changes["starttime"] = starttime.xmlschema
+ changes["endtime"] = endtime.xmlschema
+
+ tiles.each do |tile, count|
+ x = (tile.to_i >> zoom) & mask
+ y = tile.to_i & mask
+
+ t = XML::Node.new 'tile'
+ t["x"] = x.to_s
+ t["y"] = y.to_s
+ t["z"] = zoom.to_s
+ t["changes"] = count.to_s
+
+ changes << t
+ end
+
+ doc.root << changes
+
+ render :text => doc.to_s, :content_type => "text/xml"
+ else
+ render :text => "Requested zoom is invalid, or the supplied start is after the end time, or the start duration is more than 24 hours", :status => :bad_request
end
end
+ # External apps that use the api are able to query the api to find out some
+ # parameters of the API. It currently returns:
+ # * minimum and maximum API versions that can be used.
+ # * maximum area that can be requested in a bbox request in square degrees
+ # * number of tracepoints that are returned in each tracepoints page
def capabilities
doc = OSM::API.new.get_xml_doc
api = XML::Node.new 'api'
version = XML::Node.new 'version'
- version['minimum'] = '0.5';
- version['maximum'] = '0.5';
+ version['minimum'] = "#{API_VERSION}";
+ version['maximum'] = "#{API_VERSION}";
api << version
area = XML::Node.new 'area'
area['maximum'] = MAX_REQUEST_AREA.to_s;
api << area
-
+ tracepoints = XML::Node.new 'tracepoints'
+ tracepoints['per_page'] = TRACEPOINTS_PER_PAGE.to_s
+ api << tracepoints
+ waynodes = XML::Node.new 'waynodes'
+ waynodes['maximum'] = MAX_NUMBER_OF_WAY_NODES.to_s
+ api << waynodes
+ changesets = XML::Node.new 'changesets'
+ changesets['maximum_elements'] = Changeset::MAX_ELEMENTS.to_s
+ api << changesets
+ timeout = XML::Node.new 'timeout'
+ timeout['seconds'] = API_TIMEOUT.to_s
+ api << timeout
+ status = XML::Node.new 'status'
+ status['database'] = database_status.to_s
+ status['api'] = api_status.to_s
+ status['gpx'] = gpx_status.to_s
+ api << status
+
doc.root << api
render :text => doc.to_s, :content_type => "text/xml"
end
+
+ # External apps that use the api are able to query which permissions
+ # they have. This currently returns a list of permissions granted to the current user:
+ # * if authenticated via OAuth, this list will contain all permissions granted by the user to the access_token.
+ # * if authenticated via basic auth all permissions are granted, so the list will contain all permissions.
+ # * unauthenticated users have no permissions, so the list will be empty.
+ def permissions
+ @permissions = case
+ when current_token.present?
+ ClientApplication.all_permissions.select { |p| current_token.read_attribute(p) }
+ when @user
+ ClientApplication.all_permissions
+ else
+ []
+ end
+ end
end
projects / rails.git / blobdiff