Add a privileged scope that allows authorization to be skipped

[rails.git] / INSTALL.md

diff --git a/INSTALL.md b/INSTALL.md
index 3dca16677e84d80eea3fe80a91b99fe77ead73d6..1faf4bf2232a1fead17b43029eb52fd98c1392e7 100644 (file)
--- a/INSTALL.md
+++ b/INSTALL.md
@@ -3,9 +3,13 @@
 These instructions are designed for setting up The Rails Port for development and testing.
 If you want to deploy the software for your own project, then see the notes at the end.
 
 These instructions are designed for setting up The Rails Port for development and testing.
 If you want to deploy the software for your own project, then see the notes at the end.
 

-You can install the software directly on your machine, which is the traditional and probably best-supported approach. However, there is an alternative which may be easier: Vagrant. This installs the software into a virtual machine, which makes it easier to get a consistent development environment and may avoid installation difficulties. For Vagrant instructions, see [VAGRANT.md](VAGRANT.md).
+You can install the software directly on your machine, which is the traditional and probably best-supported approach. However, there
+are two alternatives which make it easier to get a consistent development environment and may avoid installation difficulties:

 
 

-These instructions are based on Ubuntu 18.04 LTS, which is the platform used by the OSMF servers.
+* **Vagrant** This installs the software into a virtual machine. For Vagrant instructions see [VAGRANT.md](VAGRANT.md).
+* **Docker** This installs the software using containerization. For Docker instructions see [DOCKER.md](DOCKER.md).
+
+These instructions are based on Ubuntu 20.04 LTS, which is the platform used by the OSMF servers.

 The instructions also work, with only minor amendments, for all other current Ubuntu releases, Fedora and MacOSX
 
 We don't recommend attempting to develop or deploy this software on Windows. If you need to use Windows, then try developing this software using Ubuntu in a virtual machine, or use [Vagrant](VAGRANT.md).
 The instructions also work, with only minor amendments, for all other current Ubuntu releases, Fedora and MacOSX
 
 We don't recommend attempting to develop or deploy this software on Windows. If you need to use Windows, then try developing this software using Ubuntu in a virtual machine, or use [Vagrant](VAGRANT.md).


@@ -18,22 +22,22 @@ of packages required before you can get the various gems installed.
 
 ## Minimum requirements
 
 
 ## Minimum requirements
 

-* Ruby 2.5+
+* Ruby 2.7+

 * PostgreSQL 9.1+
 * ImageMagick
 * Bundler (see note below about [developer Ruby setup](#rbenv))
 * Javascript Runtime
 
 * PostgreSQL 9.1+
 * ImageMagick
 * Bundler (see note below about [developer Ruby setup](#rbenv))
 * Javascript Runtime
 

-These can be installed on Ubuntu 18.04 or later with:
+These can be installed on Ubuntu 20.04 or later with:

 
 ```
 sudo apt-get update
 
 ```
 sudo apt-get update

-sudo apt-get install ruby2.5 libruby2.5 ruby2.5-dev bundler \
+sudo apt-get install ruby2.7 libruby2.7 ruby2.7-dev \

                      libmagickwand-dev libxml2-dev libxslt1-dev nodejs \
                      libmagickwand-dev libxml2-dev libxslt1-dev nodejs \

-                     apache2 apache2-dev build-essential git-core phantomjs \
+                     apache2 apache2-dev build-essential git-core firefox-geckodriver \

                      postgresql postgresql-contrib libpq-dev libsasl2-dev \
                      postgresql postgresql-contrib libpq-dev libsasl2-dev \

-                     imagemagick libffi-dev libgd-dev libarchive-dev libbz2-dev
-sudo gem2.5 install bundler
+                     imagemagick libffi-dev libgd-dev libarchive-dev libbz2-dev yarnpkg
+sudo gem2.7 install bundler

 ```
 
 ### Alternative platforms
 ```
 
 ### Alternative platforms


@@ -44,9 +48,9 @@ For Fedora, you can install the minimum requirements with:
 
 ```
 sudo dnf install ruby ruby-devel rubygem-rdoc rubygem-bundler rubygems \
 
 ```
 sudo dnf install ruby ruby-devel rubygem-rdoc rubygem-bundler rubygems \

-                 libxml2-devel js \
+                 libxml2-devel nodejs \

                  gcc gcc-c++ git \
                  gcc gcc-c++ git \

-                 postgresql postgresql-server postgresql-contrib \
+                 postgresql postgresql-server postgresql-contrib libpq-devel \

                  perl-podlators ImageMagick libffi-devel gd-devel libarchive-devel \
                  bzip2-devel nodejs-yarn
 ```
                  perl-podlators ImageMagick libffi-devel gd-devel libarchive-devel \
                  bzip2-devel nodejs-yarn
 ```


@@ -95,11 +99,11 @@ You will need to tell `bundler` that `libxml2` is installed in a Homebrew locati
 bundle config build.libxml-ruby --with-xml2-config=/usr/local/opt/libxml2/bin/xml2-config
 ```
 
 bundle config build.libxml-ruby --with-xml2-config=/usr/local/opt/libxml2/bin/xml2-config
 ```
 

-If you want to run the tests, you need `phantomjs` as well:
+If you want to run the tests, you need `geckodriver` as well:

 
 ```
 brew tap homebrew/cask
 
 ```
 brew tap homebrew/cask

-brew cask install phantomjs
+brew cask install geckodriver

 ```
 
 Note that OS X does not have a /home directory by default, so if you are using the GPX functions, you will need to change the directories specified in config/application.yml.
 ```
 
 Note that OS X does not have a /home directory by default, so if you are using the GPX functions, you will need to change the directories specified in config/application.yml.


@@ -215,7 +219,7 @@ bundle exec rake db:migrate
 To ensure that everything is set up properly, you should now run:
 
 ```
 To ensure that everything is set up properly, you should now run:
 
 ```

-bundle exec rake test:db
+bundle exec rails test:all

 ```
 
 This test will take a few minutes, reporting tests run, assertions, and any errors. If you receive no errors, then your installation is successful.
 ```
 
 This test will take a few minutes, reporting tests run, assertions, and any errors. If you receive no errors, then your installation is successful.


@@ -240,7 +244,7 @@ After installing this software, you may need to carry out some [configuration st
 
 # Installing compiled shared library database functions (optional)
 
 
 # Installing compiled shared library database functions (optional)
 

-There are special database functions required by a (little-used) API call, the migrations and diff replication. The former two are provided as *either* pure SQL functions or a compiled shared library. The SQL versions are installed as part of the recommended install procedure above and the shared library versions are recommended only if you are running a production server making a lot of `/changes` API calls or need the diff replication functionality.
+There are special database functions required by a (little-used) API call, the migrations and diff replication. The former two are provided as *either* pure SQL functions or a compiled shared library. The SQL versions are installed as part of the recommended install procedure above and the shared library versions are recommended only if you are running a production server and need the diff replication functionality.

 
 If you aren't sure which you need, stick with the SQL versions.
 
 
 If you aren't sure which you need, stick with the SQL versions.
 


@@ -267,16 +271,13 @@ cd ../..
 If you previously installed the SQL versions of these functions, we'll need to delete those before adding the new ones:
 
 ```
 If you previously installed the SQL versions of these functions, we'll need to delete those before adding the new ones:
 
 ```

-psql -d openstreetmap -c "DROP FUNCTION IF EXISTS maptile_for_point"

 psql -d openstreetmap -c "DROP FUNCTION IF EXISTS tile_for_point"
 ```
 
 Then we create the functions within each database. We're using `pwd` to substitute in the current working directory, since PostgreSQL needs the full path.
 
 ```
 psql -d openstreetmap -c "DROP FUNCTION IF EXISTS tile_for_point"
 ```
 
 Then we create the functions within each database. We're using `pwd` to substitute in the current working directory, since PostgreSQL needs the full path.
 
 ```

-psql -d openstreetmap -c "CREATE FUNCTION maptile_for_point(int8, int8, int4) RETURNS int4 AS '`pwd`/db/functions/libpgosm', 'maptile_for_point' LANGUAGE C STRICT"

 psql -d openstreetmap -c "CREATE FUNCTION tile_for_point(int4, int4) RETURNS int8 AS '`pwd`/db/functions/libpgosm', 'tile_for_point' LANGUAGE C STRICT"
 psql -d openstreetmap -c "CREATE FUNCTION tile_for_point(int4, int4) RETURNS int8 AS '`pwd`/db/functions/libpgosm', 'tile_for_point' LANGUAGE C STRICT"

-psql -d openstreetmap -c "CREATE FUNCTION xid_to_int4(xid) RETURNS int4 AS '`pwd`/db/functions/libpgosm', 'xid_to_int4' LANGUAGE C STRICT"

 ```
 
 # Ruby development install and versions<a name="rbenv"></a> (optional)
 ```
 
 # Ruby development install and versions<a name="rbenv"></a> (optional)


@@ -285,7 +286,7 @@ For simplicity, this document explains how to install all the website dependenci
 
 If you choose to install Ruby and Bundler via `rbenv`, then you do not need to install the system libraries for Ruby:
 
 
 If you choose to install Ruby and Bundler via `rbenv`, then you do not need to install the system libraries for Ruby:
 

-* For Ubuntu, you do not need to install the following packages: `ruby2.5 libruby2.5 ruby2.5-dev bundler`,
+* For Ubuntu, you do not need to install the following packages: `ruby2.7 libruby2.7 ruby2.7-dev bundler`,

 * For Fedora, you do not need to install the following packages: `ruby ruby-devel rubygem-rdoc rubygem-bundler rubygems`
 * For MacOSX, you do not need to `brew install ruby` - but make sure you've installed a version of Ruby using `rbenv` before running `gem install bundler`!
 
 * For Fedora, you do not need to install the following packages: `ruby ruby-devel rubygem-rdoc rubygem-bundler rubygems`
 * For MacOSX, you do not need to `brew install ruby` - but make sure you've installed a version of Ruby using `rbenv` before running `gem install bundler`!