before_filter :check_read_availability, :except => [:capabilities]
after_filter :compress_output
+ # Help methods for checking boundary sanity and area size
+ include MapBoundary
+
#COUNT is the number of map requests to allow before exiting and starting a new process
@@count = COUNT
# The maximum area you're allowed to request, in square degrees
MAX_REQUEST_AREA = 0.25
-
# Number of GPS trace/trackpoints returned per-page
TRACEPOINTS_PER_PAGE = 5000
+
def trackpoints
@@count+=1
end
bbox = bbox.split(',')
-
- min_lon = bbox[0].to_f
- min_lat = bbox[1].to_f
- max_lon = bbox[2].to_f
- max_lat = bbox[3].to_f
-
- # check the bbox is sane
- unless min_lon <= max_lon
- report_error("The minimum longitude must be less than the maximum longitude, but it wasn't")
- return
- end
- unless min_lat <= max_lat
- report_error("The minimum latitude must be less than the maximum latitude, but it wasn't")
- return
- end
- unless min_lon >= -180 && min_lat >= -90 && max_lon <= 180 && max_lat <= 90
- report_error("The latitudes must be between -90 and 90, and longitudes between -180 and 180")
- return
- end
-
- # check the bbox isn't too large
- requested_area = (max_lat-min_lat)*(max_lon-min_lon)
- if requested_area > MAX_REQUEST_AREA
- report_error("The maximum bbox size is " + MAX_REQUEST_AREA.to_s + ", and your request was too large. Either request a smaller area, or use planet.osm")
+ min_lon, min_lat, max_lon, max_lat = sanitise_boundaries(bbox)
+ # check boundary is sane and area within defined
+ # see /config/application.yml
+ begin
+ check_boundaries(min_lon, min_lat, max_lon, max_lat)
+ rescue Exception => err
+ report_error(err.message)
return
end
def map
GC.start
@@count+=1
-
# Figure out the bbox
bbox = params['bbox']
+
unless bbox and bbox.count(',') == 3
+ # alternatively: report_error(TEXT['boundary_parameter_required']
report_error("The parameter bbox is required, and must be of the form min_lon,min_lat,max_lon,max_lat")
return
end
bbox = bbox.split(',')
- min_lon = bbox[0].to_f
- min_lat = bbox[1].to_f
- max_lon = bbox[2].to_f
- max_lat = bbox[3].to_f
+ min_lon, min_lat, max_lon, max_lat = sanitise_boundaries(bbox)
- # check the bbox is sane
- unless min_lon <= max_lon
- report_error("The minimum longitude must be less than the maximum longitude, but it wasn't")
- return
- end
- unless min_lat <= max_lat
- report_error("The minimum latitude must be less than the maximum latitude, but it wasn't")
+ # check boundary is sane and area within defined
+ # see /config/application.yml
+ begin
+ check_boundaries(min_lon, min_lat, max_lon, max_lat)
+ rescue Exception => err
+ report_error(err.message)
return
end
- unless min_lon >= -180 && min_lat >= -90 && max_lon <= 180 && max_lat <= 90
- report_error("The latitudes must be between -90 and 90, and longitudes between -180 and 180")
- return
- end
-
- # check the bbox isn't too large
- requested_area = (max_lat-min_lat)*(max_lon-min_lon)
- if requested_area > MAX_REQUEST_AREA
- report_error("The maximum bbox size is " + MAX_REQUEST_AREA.to_s +
- ", and your request was too large. Either request a smaller area, or use planet.osm")
- return
- end
-
- # get all the nodes
- nodes = Node.find_by_area(min_lat, min_lon, max_lat, max_lon, :conditions => "visible = 1")
- node_ids = nodes.collect {|node| node.id }
+ @nodes = Node.find_by_area(min_lat, min_lon, max_lat, max_lon, :conditions => "visible = 1", :limit => APP_CONFIG['max_number_of_nodes']+1)
+ # get all the nodes, by tag not yet working, waiting for change from NickB
+ # need to be @nodes (instance var) so tests in /spec can be performed
+ #@nodes = Node.search(bbox, params[:tag])
- if node_ids.length > 50_000
+ node_ids = @nodes.collect(&:id)
+ if node_ids.length > APP_CONFIG['max_number_of_nodes']
report_error("You requested too many nodes (limit is 50,000). Either request a smaller area, or use planet.osm")
return
end
-
if node_ids.length == 0
render :text => "<osm version='0.5'></osm>", :content_type => "text/xml"
return
ways = Array.new
if node_ids.length > 0
way_nodes = WayNode.find_all_by_node_id(node_ids)
- way_ids = way_nodes.collect {|way_node| way_node.id }
+ way_ids = way_nodes.collect { |way_node| way_node.id[0] }
ways = Way.find(way_ids)
list_of_way_nodes = ways.collect { |way|
- way.way_nodes.collect { |way_node| way_node.node_id }
+ way.way_nodes.collect { |way_node| way_node.node_id }
}
list_of_way_nodes.flatten!
nodes_to_fetch = (list_of_way_nodes.uniq - node_ids) - [0]
if nodes_to_fetch.length > 0
- nodes += Node.find(nodes_to_fetch)
+ @nodes += Node.find(nodes_to_fetch)
end
visible_nodes = {}
user_display_name_cache = {}
- nodes.each do |node|
+ @nodes.each do |node|
if node.visible?
doc.root << node.to_xml_node(user_display_name_cache)
visible_nodes[node.id] = node
end
end
- # collect relationships. currently done in one big block at the end;
- # may need to move this upwards if people want automatic completion of
- # relationships, i.e. deliver referenced objects like we do with ways...
- relations = Array.new
- if visible_nodes.length > 0
- relations += Relation.find_by_sql("select e.* from current_relations e,current_relation_members em where " +
- "e.visible=1 and " +
- "em.id = e.id and em.member_type='node' and em.member_id in (#{visible_nodes.keys.join(',')})")
- end
- if way_ids.length > 0
- relations += Relation.find_by_sql("select e.* from current_relations e,current_relation_members em where " +
- "e.visible=1 and " +
- "em.id = e.id and em.member_type='way' and em.member_id in (#{way_ids.join(',')})")
- end
+ relations = Relation.find_for_nodes_and_ways(visible_nodes.keys, way_ids)
+
# we do not normally return the "other" partners referenced by an relation,
# e.g. if we return a way A that is referenced by relation X, and there's
# another way B also referenced, that is not returned. But we do make
projects / rails.git / blobdiff