X-Git-Url: https://git.openstreetmap.org./rails.git/blobdiff_plain/2c1a3d59405176426ecc92574922f8854e3ceb74..29020530a8fabe1d02e3bc9c41970c9030efc380:/config/environments/production.rb

diff --git a/config/environments/production.rb b/config/environments/production.rb
index 5c72d449c..5ce25fc2c 100644
--- a/config/environments/production.rb
+++ b/config/environments/production.rb
@@ -4,7 +4,7 @@ Rails.application.configure do
   # Settings specified here will take precedence over those in config/application.rb.
 
   # Code is not reloaded between requests.
-  config.cache_classes = true
+  config.enable_reloading = false
 
   # Eager load code on boot. This eager loads most of Rails and
   # your application in memory, allowing both threaded web servers
@@ -16,13 +16,12 @@ Rails.application.configure do
   config.consider_all_requests_local       = false
   config.action_controller.perform_caching = true
 
-  # Ensures that a master key has been made available in either ENV["RAILS_MASTER_KEY"]
-  # or in config/master.key. This key is used to decrypt credentials (and other encrypted files).
+  # Ensures that a master key has been made available in ENV["RAILS_MASTER_KEY"], config/master.key, or an environment
+  # key such as config/credentials/production.key. This key is used to decrypt credentials (and other encrypted files).
   # config.require_master_key = true
 
-  # Disable serving static files from the `/public` folder by default since
-  # Apache or NGINX already handles this.
-  config.public_file_server.enabled = ENV["RAILS_SERVE_STATIC_FILES"].present?
+  # Enable static file serving from the `/public` folder (turn off if using NGINX/Apache for it).
+  config.public_file_server.enabled = true
 
   # Compress JavaScripts and CSS.
   config.assets.js_compressor = Terser.new
@@ -32,30 +31,40 @@ Rails.application.configure do
   config.assets.compile = false
 
   # Enable serving of images, stylesheets, and JavaScripts from an asset server.
-  # config.asset_host = 'http://assets.example.com'
+  # config.asset_host = "http://assets.example.com"
 
   # Specifies the header that your server uses for sending files.
-  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
+  # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for Apache
+  # config.action_dispatch.x_sendfile_header = "X-Accel-Redirect" # for NGINX
 
   # Store uploaded files on the local file system (see config/storage.yml for options).
-  config.active_storage.service = Settings.storage_service.to_sym
+  config.active_storage.service = :local
 
   # Mount Action Cable outside main process or domain.
   # config.action_cable.mount_path = nil
-  # config.action_cable.url = 'wss://example.com/cable'
-  # config.action_cable.allowed_request_origins = [ 'http://example.com', /http:\/\/example.*/ ]
+  # config.action_cable.url = "wss://example.com/cable"
+  # config.action_cable.allowed_request_origins = [ "http://example.com", /http:\/\/example.*/ ]
+
+  # Assume all access to the app is happening through a SSL-terminating reverse proxy.
+  # Can be used together with config.force_ssl for Strict-Transport-Security and secure cookies.
+  # config.assume_ssl = true
 
   # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
   # config.force_ssl = true
 
-  # Include generic and useful information about system operation, but avoid logging too much
-  # information to avoid inadvertent exposure of personally identifiable information (PII).
-  config.log_level = :info
+  # Log to STDOUT by default
+  # config.logger = ActiveSupport::Logger.new($stdout)
+  #                                      .tap  { |logger| logger.formatter = Logger::Formatter.new }
+  #                                      .then { |logger| ActiveSupport::TaggedLogging.new(logger) }
 
   # Prepend all log lines with the following tags.
   config.log_tags = [:request_id]
 
+  # Info include generic and useful information about system operation, but avoids logging too much
+  # information to avoid inadvertent exposure of personally identifiable information (PII). If you
+  # want to log everything, set the level to "debug".
+  config.log_level = ENV.fetch("RAILS_LOG_LEVEL", "info")
+
   # Use a different log path in production.
   config.paths["log"] = Settings.log_path if Settings.key?(:log_path)
 
@@ -79,54 +88,19 @@ Rails.application.configure do
   # the I18n.default_locale when a translation cannot be found).
   config.i18n.fallbacks = true
 
-  # Send deprecation notices to registered listeners.
-  config.active_support.deprecation = :notify
-
-  # Log disallowed deprecations.
-  config.active_support.disallowed_deprecation = :log
-
-  # Tell Active Support which deprecation messages to disallow.
-  config.active_support.disallowed_deprecation_warnings = []
-
-  # Use default logging formatter so that PID and timestamp are not suppressed.
-  config.log_formatter = ::Logger::Formatter.new
-
-  # Use a different logger for distributed setups.
-  # require 'syslog/logger'
-  # config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new 'app-name')
-
-  if ENV["RAILS_LOG_TO_STDOUT"].present?
-    logger           = ActiveSupport::Logger.new($stdout)
-    logger.formatter = config.log_formatter
-    config.logger    = ActiveSupport::TaggedLogging.new(logger)
-  end
+  # Don't log any deprecations.
+  config.active_support.report_deprecations = false
 
   # Do not dump schema after migrations.
   config.active_record.dump_schema_after_migration = false unless Settings.status == "database_offline"
 
-  # Inserts middleware to perform automatic connection switching.
-  # The `database_selector` hash is used to pass options to the DatabaseSelector
-  # middleware. The `delay` is used to determine how long to wait after a write
-  # to send a subsequent read to the primary.
-  #
-  # The `database_resolver` class is used by the middleware to determine which
-  # database is appropriate to use based on the time delay.
-  #
-  # The `database_resolver_context` class is used by the middleware to set
-  # timestamps for the last write to the primary. The resolver uses the context
-  # class timestamps to determine how long to wait before reading from the
-  # replica.
-  #
-  # By default Rails will store a last write timestamp in the session. The
-  # DatabaseSelector middleware is designed as such you can define your own
-  # strategy for connection switching and pass that into the middleware through
-  # these configuration options.
-  # config.active_record.database_selector = { delay: 2.seconds }
-  # config.active_record.database_resolver = ActiveRecord::Middleware::DatabaseSelector::Resolver
-  # config.active_record.database_resolver_context = ActiveRecord::Middleware::DatabaseSelector::Resolver::Session
-
-  # Enable autoloading of dependencies.
-  config.enable_dependency_loading = true
+  # Enable DNS rebinding protection and other `Host` header attacks.
+  # config.hosts = [
+  #   "example.com",     # Allow requests from example.com
+  #   /.*\.example\.com/ # Allow requests from subdomains like `www.example.com`
+  # ]
+  # Skip DNS rebinding protection for the default health check endpoint.
+  # config.host_authorization = { exclude: ->(request) { request.path == "/up" } }
 
   # Use delayed job to queue jobs in production.
   config.active_job.queue_adapter = :delayed_job