X-Git-Url: https://git.openstreetmap.org./rails.git/blobdiff_plain/9c01c4cb639775f4f93f477546124247a33f80d2..5fbc8ad3f471fde8c5defedc41bbb8374e13abdb:/app/controllers/api_controller.rb?ds=inline

diff --git a/app/controllers/api_controller.rb b/app/controllers/api_controller.rb
index 3555260d2..c17ff6798 100644
--- a/app/controllers/api_controller.rb
+++ b/app/controllers/api_controller.rb
@@ -4,15 +4,18 @@ class ApiController < ApplicationController
   before_filter :check_read_availability, :except => [:capabilities]
   after_filter :compress_output
 
+  # Help methods for checking boundary sanity and area size
+  include MapBoundary
+
   #COUNT is the number of map requests to allow before exiting and starting a new process
   @@count = COUNT
 
   # The maximum area you're allowed to request, in square degrees
   MAX_REQUEST_AREA = 0.25
 
-
   # Number of GPS trace/trackpoints returned per-page
   TRACEPOINTS_PER_PAGE = 5000
+
   
   def trackpoints
     @@count+=1
@@ -37,30 +40,13 @@ class ApiController < ApplicationController
     end
 
     bbox = bbox.split(',')
-
-    min_lon = bbox[0].to_f
-    min_lat = bbox[1].to_f
-    max_lon = bbox[2].to_f
-    max_lat = bbox[3].to_f
-
-    # check the bbox is sane
-    unless min_lon <= max_lon
-      report_error("The minimum longitude must be less than the maximum longitude, but it wasn't")
-      return
-    end
-    unless min_lat <= max_lat
-      report_error("The minimum latitude must be less than the maximum latitude, but it wasn't")
-      return
-    end
-    unless min_lon >= -180 && min_lat >= -90 && max_lon <= 180 && max_lat <= 90
-      report_error("The latitudes must be between -90 and 90, and longitudes between -180 and 180")
-      return
-    end
-
-    # check the bbox isn't too large
-    requested_area = (max_lat-min_lat)*(max_lon-min_lon)
-    if requested_area > MAX_REQUEST_AREA
-      report_error("The maximum bbox size is " + MAX_REQUEST_AREA.to_s + ", and your request was too large. Either request a smaller area, or use planet.osm")
+    min_lon, min_lat, max_lon, max_lat = sanitise_boundaries(bbox)
+    # check boundary is sane and area within defined
+    # see /config/application.yml
+    begin
+      check_boundaries(min_lon, min_lat, max_lon, max_lat)
+    rescue Exception => err
+      report_error(err.message)
       return
     end
 
@@ -100,137 +86,120 @@ class ApiController < ApplicationController
   def map
     GC.start
     @@count+=1
-
     # Figure out the bbox
     bbox = params['bbox']
+
     unless bbox and bbox.count(',') == 3
+      # alternatively: report_error(TEXT['boundary_parameter_required']
       report_error("The parameter bbox is required, and must be of the form min_lon,min_lat,max_lon,max_lat")
       return
     end
 
     bbox = bbox.split(',')
 
-    min_lon = bbox[0].to_f
-    min_lat = bbox[1].to_f
-    max_lon = bbox[2].to_f
-    max_lat = bbox[3].to_f
-
-    # check the bbox is sane
-    unless min_lon <= max_lon
-      report_error("The minimum longitude must be less than the maximum longitude, but it wasn't")
-      return
-    end
-    unless min_lat <= max_lat
-      report_error("The minimum latitude must be less than the maximum latitude, but it wasn't")
-      return
-    end
-    unless min_lon >= -180 && min_lat >= -90 && max_lon <= 180 && max_lat <= 90
-      report_error("The latitudes must be between -90 and 90, and longitudes between -180 and 180")
-      return
-    end
+    min_lon, min_lat, max_lon, max_lat = sanitise_boundaries(bbox)
 
-    # check the bbox isn't too large
-    requested_area = (max_lat-min_lat)*(max_lon-min_lon)
-    if requested_area > MAX_REQUEST_AREA
-      report_error("The maximum bbox size is " + MAX_REQUEST_AREA.to_s + ", and your request was too large. Either request a smaller area, or use planet.osm")
+    # check boundary is sane and area within defined
+    # see /config/application.yml
+    begin
+      check_boundaries(min_lon, min_lat, max_lon, max_lat)
+    rescue Exception => err
+      report_error(err.message)
       return
     end
 
-    # get all the nodes
-    nodes = Node.find(:all, :conditions => ['latitude BETWEEN ? AND ? AND longitude BETWEEN ? AND ? AND visible = 1', min_lat, max_lat, min_lon, max_lon])
+    @nodes = Node.find_by_area(min_lat, min_lon, max_lat, max_lon, :conditions => "visible = 1", :limit => APP_CONFIG['max_number_of_nodes']+1)
+    # get all the nodes, by tag not yet working, waiting for change from NickB
+    # need to be @nodes (instance var) so tests in /spec can be performed
+    #@nodes = Node.search(bbox, params[:tag])
 
-    node_ids = nodes.collect {|node| node.id }
-
-    if node_ids.length > 50_000
+    node_ids = @nodes.collect(&:id)
+    if node_ids.length > APP_CONFIG['max_number_of_nodes']
       report_error("You requested too many nodes (limit is 50,000). Either request a smaller area, or use planet.osm")
       return
     end
-
     if node_ids.length == 0
-      render :text => "<osm version='0.4'></osm>", :content_type => "text/xml"
+      render :text => "<osm version='0.5'></osm>", :content_type => "text/xml"
       return
     end
 
-    # grab the segments
-    segments = Array.new
-    if node_ids.length > 0
-      node_ids_sql = "(#{node_ids.join(',')})"
-      # get the referenced segments
-      segments = Segment.find_by_sql "select * from current_segments where visible = 1 and (node_a in #{node_ids_sql} or node_b in #{node_ids_sql})"
-    end
-    # see if we have any missing nodes
-    segments_nodes = segments.collect {|segment| segment.node_a }
-    segments_nodes += segments.collect {|segment| segment.node_b }
-
-    segments_nodes.uniq!
-
-    missing_nodes = segments_nodes - node_ids
-
-    # get missing nodes if there are any
-    nodes += Node.find(missing_nodes) if missing_nodes.length > 0
+    relations = Array.new
 
     doc = OSM::API.new.get_xml_doc
 
     # get ways
     # find which ways are needed
-    segment_ids = segments.collect {|segment| segment.id }
     ways = Array.new
-    if segment_ids.length > 0
-      way_segments = WaySegment.find_all_by_segment_id(segment_ids)
-      way_ids = way_segments.collect {|way_segment| way_segment.id }
-      ways = Way.find(way_ids) # NB: doesn't pick up segments, tags from db until accessed via way.way_segments etc.
-
-      # seg_ids = way_segments.collect {|way_segment| way_segment.segment_id }
-
-      list_of_way_segs = ways.collect {|way| way.way_segments}
-      list_of_way_segs.flatten!
+    if node_ids.length > 0
+      way_nodes = WayNode.find_all_by_node_id(node_ids)
+      way_ids = way_nodes.collect { |way_node| way_node.id[0] }
+      ways = Way.find(way_ids)
 
-      list_of_way_segments = list_of_way_segs.collect { |way_seg| way_seg.segment_id }
+      list_of_way_nodes = ways.collect { |way|
+        way.way_nodes.collect { |way_node| way_node.node_id }
+      }
+      list_of_way_nodes.flatten!
 
-	else
-	  list_of_way_segments = Array.new
+    else
+      list_of_way_nodes = Array.new
     end
 
-    # - [0] in case some thing links to segment 0 which doesn't exist. Shouldn't actually ever happen but it does. FIXME: file a ticket for this
-    segments_to_fetch = (list_of_way_segments.uniq - segment_ids) - [0]
+    # - [0] in case some thing links to node 0 which doesn't exist. Shouldn't actually ever happen but it does. FIXME: file a ticket for this
+    nodes_to_fetch = (list_of_way_nodes.uniq - node_ids) - [0]
 
-    if segments_to_fetch.length > 0
-      segments += Segment.find(segments_to_fetch)
+    if nodes_to_fetch.length > 0
+      @nodes += Node.find(nodes_to_fetch)
     end
 
-    # get more nodes
-    #
-
-    segments_nodes = segments.collect {|segment| segment.node_a }
-    segments_nodes += segments.collect {|segment| segment.node_b }
-
-    node_ids_a = nodes.collect {|node| node.id }
-
-    nodes_to_get = segments_nodes - node_ids_a
-    nodes += Node.find(nodes_to_get) if nodes_to_get.length > 0
-
     visible_nodes = {}
     user_display_name_cache = {}
 
-    nodes.each do |node|
+    @nodes.each do |node|
       if node.visible?
         doc.root << node.to_xml_node(user_display_name_cache)
         visible_nodes[node.id] = node
       end
     end
 
-    visible_segments = {}
-
-    segments.each do |segment|
-      if visible_nodes[segment.node_a] and visible_nodes[segment.node_b] and segment.visible?
-        doc.root << segment.to_xml_node(user_display_name_cache) 
-        visible_segments[segment.id] = segment
+    way_ids = Array.new
+    ways.each do |way|
+      if way.visible?
+        doc.root << way.to_xml_node(visible_nodes, user_display_name_cache)
+        way_ids << way.id
       end
+    end 
+
+    # collect relationships. currently done in one big block at the end;
+    # may need to move this upwards if people want automatic completion of
+    # relationships, i.e. deliver referenced objects like we do with ways...
+    relations = Array.new
+    if visible_nodes.length > 0
+        relations += Relation.find_by_sql("select e.* from current_relations e,current_relation_members em where " +
+            "e.visible=1 and " +
+            "em.id = e.id and em.member_type='node' and em.member_id in (#{visible_nodes.keys.join(',')})")
+    end
+    if way_ids.length > 0
+        relations += Relation.find_by_sql("select e.* from current_relations e,current_relation_members em where " +
+            "e.visible=1 and " +
+            "em.id = e.id and em.member_type='way' and em.member_id in (#{way_ids.join(',')})")
+    end
+    # we do not normally return the "other" partners referenced by an relation, 
+    # e.g. if we return a way A that is referenced by relation X, and there's 
+    # another way B also referenced, that is not returned. But we do make 
+    # an exception for cases where an relation references another *relation*; 
+    # in that case we return that as well (but we don't go recursive here)
+    relation_ids = relations.collect { |relation| relation.id }
+    if relation_ids.length > 0
+        relations += Relation.find_by_sql("select e.* from current_relations e,current_relation_members em where " +
+            "e.visible=1 and " +
+            "em.id = e.id and em.member_type='relation' and em.member_id in (#{relation_ids.join(',')})")
     end
 
-    ways.each do |way|
-      doc.root << way.to_xml_node(visible_segments, user_display_name_cache) if way.visible?
-    end 
+    # this "uniq" may be slightly inefficient; it may be better to first collect and output
+    # all node-related relations, then find the *not yet covered* way-related ones etc.
+    relations.uniq.each do |relation|
+      doc.root << relation.to_xml_node(user_display_name_cache)
+    end
 
     render :text => doc.to_s, :content_type => "text/xml"
     
@@ -242,13 +211,58 @@ class ApiController < ApplicationController
     end
   end
 
+  def changes
+    zoom = (params[:zoom] || '12').to_i
+
+    if params.include?(:start) and params.include?(:end)
+      starttime = Time.parse(params[:start])
+      endtime = Time.parse(params[:end])
+    else
+      hours = (params[:hours] || '1').to_i.hours
+      endtime = Time.now
+      starttime = endtime - hours
+    end
+
+    if zoom >= 1 and zoom <= 16 and
+       endtime >= starttime and endtime - starttime <= 24.hours
+      mask = (1 << zoom) - 1
+
+      tiles = Node.count(:conditions => ["timestamp BETWEEN ? AND ?", starttime, endtime],
+                         :group => "maptile_for_point(latitude, longitude, #{zoom})")
+
+      doc = OSM::API.new.get_xml_doc
+      changes = XML::Node.new 'changes'
+      changes["starttime"] = starttime.xmlschema
+      changes["endtime"] = endtime.xmlschema
+
+      tiles.each do |tile, count|
+        x = (tile.to_i >> zoom) & mask
+        y = tile.to_i & mask
+
+        t = XML::Node.new 'tile'
+        t["x"] = x.to_s
+        t["y"] = y.to_s
+        t["z"] = zoom.to_s
+        t["changes"] = count.to_s
+
+        changes << t
+      end
+
+      doc.root << changes
+
+      render :text => doc.to_s, :content_type => "text/xml"
+    else
+      render :nothing => true, :status => :bad_request
+    end
+  end
+
   def capabilities
     doc = OSM::API.new.get_xml_doc
 
     api = XML::Node.new 'api'
     version = XML::Node.new 'version'
-    version['minimum'] = '0.4';
-    version['maximum'] = '0.4';
+    version['minimum'] = '0.5';
+    version['maximum'] = '0.5';
     api << version
     area = XML::Node.new 'area'
     area['maximum'] = MAX_REQUEST_AREA.to_s;