+require File.dirname(__FILE__) + '/../test_helper'
+
+class BoundingBoxTest < ActiveSupport::TestCase
+ def setup
+ @size_error_message = "The maximum bbox size is 0.25, and your request was too large. Either request a smaller area, or use planet.osm"
+ @malformed_error_message = "The parameter bbox is required, and must be of the form min_lon,min_lat,max_lon,max_lat"
+ @lon_order_error_message = "The minimum longitude must be less than the maximum longitude, but it wasn't"
+ @lat_order_error_message = "The minimum latitude must be less than the maximum latitude, but it wasn't"
+ @bbox_out_of_limits_error_message = "The latitudes must be between -90.0 and 90.0, and longitudes between -180.0 and 180.0"
+ @nil_error_message = "Should not contain nil"
+
+ @bbox_from_nils = BoundingBox.new(nil, nil, nil, nil)
+ @bbox_expand = BoundingBox.new(0,0,0,0)
+ @bbox_expand_ten = BoundingBox.new(10,10,10,10)
+ @bbox_expand_minus_two = BoundingBox.new(-2,-2,-2,-2)
+ @bbox_from_string = BoundingBox.from_s("1,2,3,4")
+ @min_lon = 1.0
+ @min_lat = 2.0
+ @max_lon = 3.0
+ @max_lat = 4.0
+
+ @bad_positive_boundary_bbox = %w{ 181,91,0,0 0,0,181,91 }
+ @bad_negative_boundary_bbox = %w{ -181,-91,0,0 0,0,-181,-91 }
+ @bad_big_bbox = %w{ -0.1,-0.1,1.1,1.1 10,10,11,11 }
+ @bad_malformed_bbox = %w{ -0.1 hello 10N2W10.1N2.1W }
+ @bad_lat_mixed_bbox = %w{ 0,0.1,0.1,0 -0.1,80,0.1,70 0.24,54.34,0.25,54.33 }
+ @bad_lon_mixed_bbox = %w{ 80,-0.1,70,0.1 54.34,0.24,54.33,0.25 }
+ @bad_limit_bbox = %w{ -180.1,-90,180,90 -180,-90.1,180,90 -180,-90,180.1,90 -180,-90,180,90.1}
+ @good_bbox = %w{ -0.1,-0.1,0.1,0.1 51.1,-0.1,51.2,0 -0.1,%20-0.1,%200.1,%200.1
+ -0.1edcd,-0.1d,0.1,0.1 -0.1E,-0.1E,0.1S,0.1N S0.1,W0.1,N0.1,E0.1}
+
+ @expand_min_lon_array = %w{ 2,10,10,10 1,10,10,10 0,10,10,10 -1,10,10,10 -2,10,10,10 -8,10,10,10 }
+ @expand_min_lat_array = %w{ 10,2,10,10 10,1,10,10 10,0,10,10 10,-1,10,10 10,-2,10,10 10,-8,10,10 }
+ @expand_max_lon_array = %w{ -2,-2,-1,-2 -2,-2,0,-2 -2,-2,1,-2 -2,-2,2,-2 }
+ @expand_max_lat_array = %w{ -2,-2,-2,-1 -2,-2,-2,0 -2,-2,-2,1 -2,-2,-2,2 }
+ @expand_min_lon_margin_response = [[2,10,10,10], [-7,10,10,10], [-7,10,10,10], [-7,10,10,10], [-7,10,10,10], [-25,10,10,10]]
+ @expand_min_lat_margin_response = [[10,2,10,10], [10,-7,10,10], [10,-7,10,10], [10,-7,10,10], [10,-7,10,10], [10,-25,10,10]]
+ @expand_max_lon_margin_response = [[-2,-2,-1,-2], [-2,-2,1,-2], [-2,-2,1,-2], [-2,-2,5,-2]]
+ @expand_max_lat_margin_response = [[-2,-2,-2,-1], [-2,-2,-2,1], [-2,-2,-2,1], [-2,-2,-2,5]]
+ end
+
+ def test_good_bbox_from_string
+ @good_bbox.each do |string|
+ bbox = BoundingBox.from_s(string)
+ array = string.split(',').collect {|s| s.to_f}
+ check_bbox(bbox, array)
+ end
+ end
+
+ def test_bbox_from_s_malformed
+ @bad_malformed_bbox.each do |bbox_string|
+ bbox = BoundingBox.from_s(bbox_string)
+ assert_nil bbox
+ end
+ end
+
+ def test_good_bbox_from_params
+ @good_bbox.each do |string|
+ bbox = BoundingBox.from_bbox_params({:bbox => string})
+ array = string.split(',').collect {|s| s.to_f}
+ check_bbox(bbox, array)
+ end
+ end
+
+ def test_good_bbox_from_lon_lat_params
+ @good_bbox.each do |string|
+ array = string.split(',')
+ bbox = BoundingBox.from_lon_lat_params({:minlon => array[0], :minlat => array[1], :maxlon => array[2], :maxlat => array[3]})
+ check_bbox(bbox, array.collect {|s| s.to_f})
+ end
+ end
+
+ def test_bbox_from_params_malformed
+ @bad_malformed_bbox.each do |bbox_string|
+ exception = assert_raise(OSM::APIBadUserInput) {BoundingBox.from_bbox_params({:bbox => bbox_string})}
+ assert_equal(@malformed_error_message, exception.message)
+ end
+ end
+
+ def test_good_bbox_from_new
+ @good_bbox.each do |string|
+ array = string.split(',')
+ bbox = BoundingBox.new(array[0], array[1], array[2], array[3])
+ check_bbox(bbox, array.collect {|s| s.to_f})
+ end
+ end
+
+ def test_creation_from_new_with_nils
+ check_bbox(@bbox_from_nils, [nil, nil, nil, nil])
+ end
+
+ def test_expand_min_lon_boundary
+ @bbox_expand.expand!(BoundingBox.new(-1810000000,0,0,0))
+ check_expand(@bbox_expand, "-1800000000,0,0,0")
+ end
+
+ def test_expand_min_lat_boundary
+ @bbox_expand.expand!(BoundingBox.new(0,-910000000,0,0))
+ check_expand(@bbox_expand, "0,-900000000,0,0")
+ end
+
+ def test_expand_max_lon_boundary
+ @bbox_expand.expand!(BoundingBox.new(0,0,1810000000,0))
+ check_expand(@bbox_expand, "0,0,1800000000,0")
+ end
+
+ def test_expand_max_lat_boundary
+ @bbox_expand.expand!(BoundingBox.new(0,0,0,910000000))
+ check_expand(@bbox_expand, "0,0,0,900000000")
+ end
+
+ def test_expand_min_lon_without_margin
+ @expand_min_lon_array.each {|array_string| check_expand(@bbox_expand_ten, array_string)}
+ end
+
+ def test_expand_min_lon_with_margin
+ @expand_min_lon_array.each_with_index do |array_string, index|
+ check_expand(@bbox_expand_ten, array_string, 1, @expand_min_lon_margin_response[index])
+ end
+ end
+
+ def test_expand_min_lat_without_margin
+ @expand_min_lat_array.each {|array_string| check_expand(@bbox_expand_ten, array_string)}
+ end
+
+ def test_expand_min_lat_with_margin
+ @expand_min_lat_array.each_with_index do |array_string, index|
+ check_expand(@bbox_expand_ten, array_string, 1, @expand_min_lat_margin_response[index])
+ end
+ end
+
+ def test_expand_max_lon_without_margin
+ @expand_max_lon_array.each {|array_string| check_expand(@bbox_expand_minus_two, array_string)}
+ end
+
+ def test_expand_max_lon_with_margin
+ @expand_max_lon_array.each_with_index do |array_string, index|
+ check_expand(@bbox_expand_minus_two, array_string, 1, @expand_max_lon_margin_response[index])
+ end
+ end
+
+ def test_expand_max_lat_without_margin
+ @expand_max_lat_array.each {|array_string| check_expand(@bbox_expand_minus_two, array_string)}
+ end
+
+ def test_expand_max_lat_with_margin
+ bbox = @bbox_expand
+ @expand_max_lat_array.each_with_index do |array_string, index|
+ check_expand(@bbox_expand_minus_two, array_string, 1, @expand_max_lat_margin_response[index])
+ end
+ end
+
+ def test_good_bbox_boundaries
+ @good_bbox.each do |bbox_string|
+ assert_nothing_raised(OSM::APIBadBoundingBox) {BoundingBox.from_s(bbox_string).check_boundaries}
+ end
+ end
+
+ def test_from_params_with_positive_out_of_boundary
+ @bad_positive_boundary_bbox.each do |bbox_string|
+ bbox = BoundingBox.from_bbox_params({:bbox => bbox_string})
+ array = bbox.to_a
+ assert_equal 180, [array[0], array[2]].max
+ assert_equal 90, [array[1], array[3]].max
+ end
+ end
+
+ def test_from_params_with_negative_out_of_boundary
+ @bad_negative_boundary_bbox.each do |bbox_string|
+ bbox = BoundingBox.from_bbox_params({:bbox => bbox_string})
+ array = bbox.to_a
+ assert_equal -180, [array[0], array[2]].min
+ assert_equal -90, [array[1], array[3]].min
+ end
+ end
+
+ def test_boundaries_mixed_lon
+ @bad_lon_mixed_bbox.each do |bbox_string|
+ exception = assert_raise(OSM::APIBadBoundingBox) {BoundingBox.from_s(bbox_string).check_boundaries}
+ assert_equal(@lon_order_error_message, exception.message)
+ end
+ end
+
+ def test_boundaries_mixed_lat
+ @bad_lat_mixed_bbox.each do |bbox_string|
+ exception = assert_raise(OSM::APIBadBoundingBox) {BoundingBox.from_s(bbox_string).check_boundaries}
+ assert_equal(@lat_order_error_message, exception.message)
+ end
+ end
+
+ def test_boundaries_out_of_limits
+ @bad_limit_bbox.each do |bbox_string|
+ exception = assert_raise(OSM::APIBadBoundingBox) {BoundingBox.from_s(bbox_string).check_boundaries}
+ assert_equal(@bbox_out_of_limits_error_message, exception.message)
+ end
+ end
+
+ def test_good_bbox_size
+ @good_bbox.each do |bbox_string|
+ assert_nothing_raised(OSM::APIBadBoundingBox) {BoundingBox.from_s(bbox_string).check_size}
+ end
+ end
+
+ def test_size_to_big
+ @bad_big_bbox.each do |bbox_string|
+ bbox = nil
+ assert_nothing_raised(OSM::APIBadBoundingBox) {bbox = BoundingBox.from_bbox_params({:bbox => bbox_string}).check_boundaries}
+ exception = assert_raise(OSM::APIBadBoundingBox) {bbox.check_size}
+ assert_equal(@size_error_message, exception.message)
+ end
+ end
+
+ def test_bbox_area
+ @good_bbox.each do |string|
+ bbox = BoundingBox.from_s(string)
+ array = string.split(',')
+ assert_equal ((array[2].to_f - array[0].to_f) * (array[3].to_f - array[1].to_f)), bbox.area
+ end
+ end
+
+ def test_complete
+ assert !@bbox_from_nils.complete?, "should contain a nil"
+ assert @bbox_from_string.complete?, "should not contain a nil"
+ end
+
+ def test_centre_lon
+ @good_bbox.each do |bbox_string|
+ array = bbox_string.split(',')
+ assert_equal ((array[0].to_f + array[2].to_f) / 2.0), BoundingBox.from_s(bbox_string).centre_lon
+ end
+ end
+
+ def test_centre_lat
+ @good_bbox.each do |bbox_string|
+ array = bbox_string.split(',')
+ assert_equal ((array[1].to_f + array[3].to_f) / 2.0), BoundingBox.from_s(bbox_string).centre_lat
+ end
+ end
+
+ def test_width
+ @good_bbox.each do |bbox_string|
+ array = bbox_string.split(',')
+ assert_equal (array[2].to_f - array[0].to_f), BoundingBox.from_s(bbox_string).width
+ end
+ end
+
+ def test_height
+ @good_bbox.each do |bbox_string|
+ array = bbox_string.split(',')
+ assert_equal (array[3].to_f - array[1].to_f), BoundingBox.from_s(bbox_string).height
+ end
+ end
+
+ def test_slippy_width
+ assert_in_delta 5.68888888888889, @bbox_from_string.slippy_width(2), 0.000000000000001
+ end
+
+ def test_slippy_height
+ assert_in_delta 5.69698684268433, @bbox_from_string.slippy_height(2), 0.000000000000001
+ end
+
+ def test_add_bounds_to_no_underscore
+ bounds = @bbox_from_string.add_bounds_to({})
+ assert_equal 4, bounds.size
+ assert_equal @min_lon.to_s, bounds['minlon']
+ assert_equal @min_lat.to_s, bounds['minlat']
+ assert_equal @max_lon.to_s, bounds['maxlon']
+ assert_equal @max_lat.to_s, bounds['maxlat']
+ end
+
+ def test_add_bounds_to_with_underscore
+ bounds = @bbox_from_string.add_bounds_to({}, '_')
+ assert_equal 4, bounds.size
+ assert_equal @min_lon.to_s, bounds['min_lon']
+ assert_equal @min_lat.to_s, bounds['min_lat']
+ assert_equal @max_lon.to_s, bounds['max_lon']
+ assert_equal @max_lat.to_s, bounds['max_lat']
+ end
+
+ def test_to_scaled
+ bbox = @bbox_from_string.to_scaled
+ assert_equal @min_lon * GeoRecord::SCALE, bbox.min_lon
+ assert_equal @min_lat * GeoRecord::SCALE, bbox.min_lat
+ assert_equal @max_lon * GeoRecord::SCALE, bbox.max_lon
+ assert_equal @max_lat * GeoRecord::SCALE, bbox.max_lat
+ end
+
+ def test_to_unscaled
+ scale = GeoRecord::SCALE
+ bbox = BoundingBox.new(1.0 * scale, 2.0 * scale, 3.0 * scale, 4.0 * scale).to_unscaled
+ check_bbox(bbox, [@min_lon, @min_lat, @max_lon, @max_lat])
+ end
+
+ def test_to_a
+ assert_equal [1.0,2.0,3.0,4.0], @bbox_from_string.to_a
+ end
+
+ def test_to_string
+ assert_equal "#{@min_lon},#{@min_lat},#{@max_lon},#{@max_lat}", @bbox_from_string.to_s
+ end
+
+ private
+ def check_expand(bbox, array_string, margin = 0, result = nil)
+ array = array_string.split(',').collect {|s| s.to_f}
+ result = array unless result
+ bbox.expand!(BoundingBox.new(array[0], array[1], array[2], array[3]), margin)
+ check_bbox(bbox, result)
+ end
+
+ def check_bbox(bbox, result)
+ assert_equal result[0], bbox.min_lon, 'min_lon'
+ assert_equal result[1], bbox.min_lat, 'min_lat'
+ assert_equal result[2], bbox.max_lon, 'max_lon'
+ assert_equal result[3], bbox.max_lat, 'max_lat'
+ end
+end
projects / rails.git / commitdiff