+++ /dev/null
-; Start a new pool named 'default'.
-; the variable $pool can we used in any directive and will be replaced by the
-; pool name ('default' here)
-[default]
-
-; Per pool prefix
-; It only applies on the following directives:
-; - 'slowlog'
-; - 'listen' (unixsocket)
-; - 'chroot'
-; - 'chdir'
-; - 'php_values'
-; - 'php_admin_values'
-; When not set, the global prefix (or /usr) applies instead.
-; Note: This directive can also be relative to the global prefix.
-; Default Value: none
-;prefix = /path/to/pools/$pool
-
-; Unix user/group of processes
-; Note: The user is mandatory. If the group is not set, the default user's group
-; will be used.
-user = www-data
-group = www-data
-
-; The address on which to accept FastCGI requests.
-; Valid syntaxes are:
-; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
-; a specific port;
-; 'port' - to listen on a TCP socket to all addresses on a
-; specific port;
-; '/path/to/unix/socket' - to listen on a unix socket.
-; Note: This value is mandatory.
-listen = 127.0.0.1:7000
-
-; Set listen(2) backlog. A value of '-1' means unlimited.
-; Default Value: 128 (-1 on FreeBSD and OpenBSD)
-;listen.backlog = -1
-
-; Set permissions for unix socket, if one is used. In Linux, read/write
-; permissions must be set in order to allow connections from a web server. Many
-; BSD-derived systems allow connections regardless of permissions.
-; Default Values: user and group are set as the running user
-; mode is set to 0666
-;listen.owner = www-data
-;listen.group = www-data
-;listen.mode = 0660
-
-; List of ipv4 addresses of FastCGI clients which are allowed to connect.
-; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
-; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
-; must be separated by a comma. If this value is left blank, connections will be
-; accepted from any ip address.
-; Default Value: any
-;listen.allowed_clients = 127.0.0.1
-
-; Choose how the process manager will control the number of child processes.
-; Possible Values:
-; static - a fixed number (pm.max_children) of child processes;
-; dynamic - the number of child processes are set dynamically based on the
-; following directives. With this process management, there will be
-; always at least 1 children.
-; pm.max_children - the maximum number of children that can
-; be alive at the same time.
-; pm.start_servers - the number of children created on startup.
-; pm.min_spare_servers - the minimum number of children in 'idle'
-; state (waiting to process). If the number
-; of 'idle' processes is less than this
-; number then some children will be created.
-; pm.max_spare_servers - the maximum number of children in 'idle'
-; state (waiting to process). If the number
-; of 'idle' processes is greater than this
-; number then some children will be killed.
-; ondemand - no children are created at startup. Children will be forked when
-; new requests will connect. The following parameter are used:
-; pm.max_children - the maximum number of children that
-; can be alive at the same time.
-; pm.process_idle_timeout - The number of seconds after which
-; an idle process will be killed.
-; Note: This value is mandatory.
-pm = dynamic
-
-; The number of child processes to be created when pm is set to 'static' and the
-; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
-; This value sets the limit on the number of simultaneous requests that will be
-; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
-; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
-; CGI. The below defaults are based on a server without much resources. Don't
-; forget to tweak pm.* to fit your needs.
-; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
-; Note: This value is mandatory.
-pm.max_children = 10
-
-; The number of child processes created on startup.
-; Note: Used only when pm is set to 'dynamic'
-; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
-pm.start_servers = 4
-
-; The desired minimum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.min_spare_servers = 2
-
-; The desired maximum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.max_spare_servers = 6
-
-; The number of seconds after which an idle process will be killed.
-; Note: Used only when pm is set to 'ondemand'
-; Default Value: 10s
-;pm.process_idle_timeout = 10s;
-
-; The number of requests each child process should execute before respawning.
-; This can be useful to work around memory leaks in 3rd party libraries. For
-; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
-; Default Value: 0
-;pm.max_requests = 500
-
-; The URI to view the FPM status page. If this value is not set, no URI will be
-; recognized as a status page. It shows the following informations:
-; pool - the name of the pool;
-; process manager - static, dynamic or ondemand;
-; start time - the date and time FPM has started;
-; start since - number of seconds since FPM has started;
-; accepted conn - the number of request accepted by the pool;
-; listen queue - the number of request in the queue of pending
-; connections (see backlog in listen(2));
-; max listen queue - the maximum number of requests in the queue
-; of pending connections since FPM has started;
-; listen queue len - the size of the socket queue of pending connections;
-; idle processes - the number of idle processes;
-; active processes - the number of active processes;
-; total processes - the number of idle + active processes;
-; max active processes - the maximum number of active processes since FPM
-; has started;
-; max children reached - number of times, the process limit has been reached,
-; when pm tries to start more children (works only for
-; pm 'dynamic' and 'ondemand');
-; Value are updated in real time.
-; Example output:
-; pool: www
-; process manager: static
-; start time: 01/Jul/2011:17:53:49 +0200
-; start since: 62636
-; accepted conn: 190460
-; listen queue: 0
-; max listen queue: 1
-; listen queue len: 42
-; idle processes: 4
-; active processes: 11
-; total processes: 15
-; max active processes: 12
-; max children reached: 0
-;
-; By default the status page output is formatted as text/plain. Passing either
-; 'html', 'xml' or 'json' in the query string will return the corresponding
-; output syntax. Example:
-; http://www.foo.bar/status
-; http://www.foo.bar/status?json
-; http://www.foo.bar/status?html
-; http://www.foo.bar/status?xml
-;
-; By default the status page only outputs short status. Passing 'full' in the
-; query string will also return status for each pool process.
-; Example:
-; http://www.foo.bar/status?full
-; http://www.foo.bar/status?json&full
-; http://www.foo.bar/status?html&full
-; http://www.foo.bar/status?xml&full
-; The Full status returns for each process:
-; pid - the PID of the process;
-; state - the state of the process (Idle, Running, ...);
-; start time - the date and time the process has started;
-; start since - the number of seconds since the process has started;
-; requests - the number of requests the process has served;
-; request duration - the duration in µs of the requests;
-; request method - the request method (GET, POST, ...);
-; request URI - the request URI with the query string;
-; content length - the content length of the request (only with POST);
-; user - the user (PHP_AUTH_USER) (or '-' if not set);
-; script - the main script called (or '-' if not set);
-; last request cpu - the %cpu the last request consumed
-; it's always 0 if the process is not in Idle state
-; because CPU calculation is done when the request
-; processing has terminated;
-; last request memory - the max amount of memory the last request consumed
-; it's always 0 if the process is not in Idle state
-; because memory calculation is done when the request
-; processing has terminated;
-; If the process is in Idle state, then informations are related to the
-; last request the process has served. Otherwise informations are related to
-; the current request being served.
-; Example output:
-; ************************
-; pid: 31330
-; state: Running
-; start time: 01/Jul/2011:17:53:49 +0200
-; start since: 63087
-; requests: 12808
-; request duration: 1250261
-; request method: GET
-; request URI: /test_mem.php?N=10000
-; content length: 0
-; user: -
-; script: /home/fat/web/docs/php/test_mem.php
-; last request cpu: 0.00
-; last request memory: 0
-;
-; Note: There is a real-time FPM status monitoring sample web page available
-; It's available in: ${prefix}/share/fpm/status.html
-;
-; Note: The value must start with a leading slash (/). The value can be
-; anything, but it may not be a good idea to use the .php extension or it
-; may conflict with a real PHP file.
-; Default Value: not set
-;pm.status_path = /status
-
-; The ping URI to call the monitoring page of FPM. If this value is not set, no
-; URI will be recognized as a ping page. This could be used to test from outside
-; that FPM is alive and responding, or to
-; - create a graph of FPM availability (rrd or such);
-; - remove a server from a group if it is not responding (load balancing);
-; - trigger alerts for the operating team (24/7).
-; Note: The value must start with a leading slash (/). The value can be
-; anything, but it may not be a good idea to use the .php extension or it
-; may conflict with a real PHP file.
-; Default Value: not set
-;ping.path = /ping
-
-; This directive may be used to customize the response of a ping request. The
-; response is formatted as text/plain with a 200 response code.
-; Default Value: pong
-;ping.response = pong
-
-; The access log file
-; Default: not set
-;access.log = log/$pool.access.log
-
-; The access log format.
-; The following syntax is allowed
-; %%: the '%' character
-; %C: %CPU used by the request
-; it can accept the following format:
-; - %{user}C for user CPU only
-; - %{system}C for system CPU only
-; - %{total}C for user + system CPU (default)
-; %d: time taken to serve the request
-; it can accept the following format:
-; - %{seconds}d (default)
-; - %{miliseconds}d
-; - %{mili}d
-; - %{microseconds}d
-; - %{micro}d
-; %e: an environment variable (same as $_ENV or $_SERVER)
-; it must be associated with embraces to specify the name of the env
-; variable. Some exemples:
-; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
-; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
-; %f: script filename
-; %l: content-length of the request (for POST request only)
-; %m: request method
-; %M: peak of memory allocated by PHP
-; it can accept the following format:
-; - %{bytes}M (default)
-; - %{kilobytes}M
-; - %{kilo}M
-; - %{megabytes}M
-; - %{mega}M
-; %n: pool name
-; %o: ouput header
-; it must be associated with embraces to specify the name of the header:
-; - %{Content-Type}o
-; - %{X-Powered-By}o
-; - %{Transfert-Encoding}o
-; - ....
-; %p: PID of the child that serviced the request
-; %P: PID of the parent of the child that serviced the request
-; %q: the query string
-; %Q: the '?' character if query string exists
-; %r: the request URI (without the query string, see %q and %Q)
-; %R: remote IP address
-; %s: status (response code)
-; %t: server time the request was received
-; it can accept a strftime(3) format:
-; %d/%b/%Y:%H:%M:%S %z (default)
-; %T: time the log has been written (the request has finished)
-; it can accept a strftime(3) format:
-; %d/%b/%Y:%H:%M:%S %z (default)
-; %u: remote user
-;
-; Default: "%R - %u %t \"%m %r\" %s"
-;access.format = %R - %u %t "%m %r%Q%q" %s %f %{mili}d %{kilo}M %C%%
-
-; The log file for slow requests
-; Default Value: not set
-; Note: slowlog is mandatory if request_slowlog_timeout is set
-;slowlog = log/$pool.log.slow
-
-; The timeout for serving a single request after which a PHP backtrace will be
-; dumped to the 'slowlog' file. A value of '0s' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-;request_slowlog_timeout = 0
-
-; The timeout for serving a single request after which the worker process will
-; be killed. This option should be used when the 'max_execution_time' ini option
-; does not stop script execution for some reason. A value of '0' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-;request_terminate_timeout = 0
-
-; Set open file descriptor rlimit.
-; Default Value: system defined value
-;rlimit_files = 1024
-
-; Set max core size rlimit.
-; Possible Values: 'unlimited' or an integer greater or equal to 0
-; Default Value: system defined value
-;rlimit_core = 0
-
-; Chroot to this directory at the start. This value must be defined as an
-; absolute path. When this value is not set, chroot is not used.
-; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
-; of its subdirectories. If the pool prefix is not set, the global prefix
-; will be used instead.
-; Note: chrooting is a great security feature and should be used whenever
-; possible. However, all PHP paths will be relative to the chroot
-; (error_log, sessions.save_path, ...).
-; Default Value: not set
-;chroot =
-
-; Chdir to this directory at the start.
-; Note: relative path can be used.
-; Default Value: current directory or / when chroot
-chdir = /
-
-; Redirect worker stdout and stderr into main error log. If not set, stdout and
-; stderr will be redirected to /dev/null according to FastCGI specs.
-; Note: on highloaded environement, this can cause some delay in the page
-; process time (several ms).
-; Default Value: no
-;catch_workers_output = yes
-
-; Limits the extensions of the main script FPM will allow to parse. This can
-; prevent configuration mistakes on the web server side. You should only limit
-; FPM to .php extensions to prevent malicious users to use other extensions to
-; exectute php code.
-; Note: set an empty value to allow all extensions.
-; Default Value: .php
-;security.limit_extensions = .php .php3 .php4 .php5
-
-; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
-; the current environment.
-; Default Value: clean env
-;env[HOSTNAME] = $HOSTNAME
-;env[PATH] = /usr/local/bin:/usr/bin:/bin
-;env[TMP] = /tmp
-;env[TMPDIR] = /tmp
-;env[TEMP] = /tmp
-
-; Additional php.ini defines, specific to this pool of workers. These settings
-; overwrite the values previously defined in the php.ini. The directives are the
-; same as the PHP SAPI:
-; php_value/php_flag - you can set classic ini defines which can
-; be overwritten from PHP call 'ini_set'.
-; php_admin_value/php_admin_flag - these directives won't be overwritten by
-; PHP call 'ini_set'
-; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
-
-; Defining 'extension' will load the corresponding shared extension from
-; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
-; overwrite previously defined php.ini values, but will append the new value
-; instead.
-
-; Note: path INI options can be relative and will be expanded with the prefix
-; (pool, global or /usr)
-
-; Default Value: nothing is defined by default except the values in php.ini and
-; specified at startup with the -d argument
-;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
-;php_flag[display_errors] = off
-;php_admin_value[error_log] = /var/log/fpm-php.www.log
-;php_admin_flag[log_errors] = on
-;php_admin_value[memory_limit] = 32M
projects / chef.git / commitdiff