-require 'test_helper'
-require 'api_controller'
+require "test_helper"
+require "api_controller"
class ApiControllerTest < ActionController::TestCase
api_fixtures
-
+
def setup
super
- @badbigbbox = %w{ -0.1,-0.1,1.1,1.1 10,10,11,11 }
- @badmalformedbbox = %w{ -0.1 hello
- 10N2W10.1N2.1W }
- @badlatmixedbbox = %w{ 0,0.1,0.1,0 -0.1,80,0.1,70 0.24,54.34,0.25,54.33 }
- @badlonmixedbbox = %w{ 80,-0.1,70,0.1 54.34,0.24,54.33,0.25 }
- #@badlatlonoutboundsbbox = %w{ 191,-0.1,193,0.1 -190.1,89.9,-190,90 }
- @goodbbox = %w{ -0.1,-0.1,0.1,0.1 51.1,-0.1,51.2,0
- -0.1,%20-0.1,%200.1,%200.1 -0.1edcd,-0.1d,0.1,0.1 -0.1E,-0.1E,0.1S,0.1N S0.1,W0.1,N0.1,E0.1}
+ @badbigbbox = %w(-0.1,-0.1,1.1,1.1 10,10,11,11)
+ @badmalformedbbox = %w(-0.1 hello
+ 10N2W10.1N2.1W)
+ @badlatmixedbbox = %w(0,0.1,0.1,0 -0.1,80,0.1,70 0.24,54.34,0.25,54.33)
+ @badlonmixedbbox = %w(80,-0.1,70,0.1 54.34,0.24,54.33,0.25)
+ # @badlatlonoutboundsbbox = %w{ 191,-0.1,193,0.1 -190.1,89.9,-190,90 }
+ @goodbbox = %w(-0.1,-0.1,0.1,0.1 51.1,-0.1,51.2,0
+ -0.1,%20-0.1,%200.1,%200.1 -0.1edcd,-0.1d,0.1,0.1 -0.1E,-0.1E,0.1S,0.1N S0.1,W0.1,N0.1,E0.1)
# That last item in the goodbbox really shouldn't be there, as the API should
# reall reject it, however this is to test to see if the api changes.
end
{ :controller => "api", :action => "capabilities" }
)
assert_recognizes(
- { :controller => "api", :action => "capabilities" },
+ { :controller => "api", :action => "capabilities" },
{ :path => "/api/0.6/capabilities", :method => :get }
)
assert_routing(
node = current_nodes(:used_node_1)
# Need to split the min/max lat/lon out into their own variables here
# so that we can test they are returned later.
- minlon = node.lon-0.1
- minlat = node.lat-0.1
- maxlon = node.lon+0.1
- maxlat = node.lat+0.1
+ minlon = node.lon - 0.1
+ minlat = node.lat - 0.1
+ maxlon = node.lon + 0.1
+ maxlat = node.lat + 0.1
bbox = "#{minlon},#{minlat},#{maxlon},#{maxlat}"
get :map, :bbox => bbox
if $VERBOSE
# This should really be more generic
assert_select "tag[k='test'][v='yes']"
end
- # Should also test for the ways and relation
+ assert_select "way", :count => 2
+ assert_select "way[id='1']", :count => 1
+ assert_select "way[id='3']", :count => 1
+ assert_select "relation", :count => 1
+ assert_select "relation[id='1']", :count => 1
end
end
-
+
# This differs from the above test in that we are making the bbox exactly
# the same as the node we are looking at
def test_map_inclusive
# This should really be more generic
assert_select "tag[k='test'][v='yes']"
end
- # Should also test for the ways and relation
+ assert_select "way", :count => 2
+ assert_select "way[id='1']", :count => 1
+ assert_select "way[id='3']", :count => 1
+ assert_select "relation", :count => 1
+ assert_select "relation[id='1']", :count => 1
+ end
+ end
+
+ def test_map_complete_way
+ node = current_nodes(:used_node_2)
+ bbox = "#{node.lon},#{node.lat},#{node.lon},#{node.lat}"
+ get :map, :bbox => bbox
+ assert_response :success, "The map call should have succeeded"
+ assert_select "osm[version='#{API_VERSION}'][generator='#{GENERATOR}']", :count => 1 do
+ assert_select "bounds[minlon='#{node.lon}'][minlat='#{node.lat}'][maxlon='#{node.lon}'][maxlat='#{node.lat}']", :count => 1
+ assert_select "node", :count => 3
+ assert_select "node[id='4']", :count => 1
+ assert_select "node[id='11']", :count => 1
+ assert_select "node[id='15']", :count => 1
+ assert_select "way", :count => 2
+ assert_select "way[id='5']", :count => 1
+ assert_select "way[id='7']", :count => 1
+ assert_select "relation", :count => 1
+ assert_select "relation[id='8']", :count => 1
+ end
+ end
+
+ def test_map_empty
+ get :map, :bbox => "179.998,89.998,179.999.1,89.999"
+ assert_response :success, "The map call should have succeeded"
+ assert_select "osm[version='#{API_VERSION}'][generator='#{GENERATOR}']", :count => 1 do
+ assert_select "bounds[minlon='179.998'][minlat='89.998'][maxlon='179.999'][maxlat='89.999']", :count => 1
+ assert_select "node", :count => 0
+ assert_select "way", :count => 0
+ assert_select "relation", :count => 0
end
end
-
+
def test_tracepoints
point = gpx_files(:public_trace_file)
- minlon = point.longitude-0.001
- minlat = point.latitude-0.001
- maxlon = point.longitude+0.001
- maxlat = point.latitude+0.001
+ minlon = point.longitude - 0.001
+ minlat = point.latitude - 0.001
+ maxlon = point.longitude + 0.001
+ maxlat = point.latitude + 0.001
bbox = "#{minlon},#{minlat},#{maxlon},#{maxlat}"
get :trackpoints, :bbox => bbox
assert_response :success
end
end
end
-
+
def test_tracepoints_trackable
point = gpx_files(:trackable_trace_file)
- minlon = point.longitude-0.002
- minlat = point.latitude-0.002
- maxlon = point.longitude+0.002
- maxlat = point.latitude+0.002
+ minlon = point.longitude - 0.002
+ minlat = point.latitude - 0.002
+ maxlon = point.longitude + 0.002
+ maxlat = point.latitude + 0.002
bbox = "#{minlon},#{minlat},#{maxlon},#{maxlat}"
get :trackpoints, :bbox => bbox
assert_response :success
end
end
end
-
+
def test_tracepoints_identifiable
point = gpx_files(:identifiable_trace_file)
- minlon = point.longitude-0.002
- minlat = point.latitude-0.002
- maxlon = point.longitude+0.002
- maxlat = point.latitude+0.002
+ minlon = point.longitude - 0.002
+ minlat = point.latitude - 0.002
+ maxlon = point.longitude + 0.002
+ maxlat = point.latitude + 0.002
bbox = "#{minlon},#{minlat},#{maxlon},#{maxlat}"
get :trackpoints, :bbox => bbox
assert_response :success
end
end
end
-
+
def test_map_without_bbox
- ["trackpoints", "map"].each do |tq|
+ %w(trackpoints map).each do |tq|
get tq
assert_response :bad_request
assert_equal "The parameter bbox is required, and must be of the form min_lon,min_lat,max_lon,max_lat", @response.body, "A bbox param was expected"
end
end
-
+
def test_traces_page_less_than_0
-10.upto(-1) do |i|
get :trackpoints, :page => i, :bbox => "-0.1,-0.1,0.1,0.1"
assert_response :success, "The page number was #{i} and should have been accepted"
end
end
-
+
def test_bbox_too_big
@badbigbbox.each do |bbox|
- [ "trackpoints", "map" ].each do |tq|
+ %w(trackpoints map).each do |tq|
get tq, :bbox => bbox
assert_response :bad_request, "The bbox:#{bbox} was expected to be too big"
assert_equal "The maximum bbox size is #{MAX_REQUEST_AREA}, and your request was too large. Either request a smaller area, or use planet.osm", @response.body, "bbox: #{bbox}"
end
end
end
-
+
def test_bbox_malformed
@badmalformedbbox.each do |bbox|
- [ "trackpoints", "map" ].each do |tq|
+ %w(trackpoints map).each do |tq|
get tq, :bbox => bbox
assert_response :bad_request, "The bbox:#{bbox} was expected to be malformed"
assert_equal "The parameter bbox is required, and must be of the form min_lon,min_lat,max_lon,max_lat", @response.body, "bbox: #{bbox}"
end
end
end
-
+
def test_bbox_lon_mixedup
@badlonmixedbbox.each do |bbox|
- [ "trackpoints", "map" ].each do |tq|
+ %w(trackpoints map).each do |tq|
get tq, :bbox => bbox
assert_response :bad_request, "The bbox:#{bbox} was expected to have the longitude mixed up"
assert_equal "The minimum longitude must be less than the maximum longitude, but it wasn't", @response.body, "bbox: #{bbox}"
end
end
end
-
+
def test_bbox_lat_mixedup
@badlatmixedbbox.each do |bbox|
- ["trackpoints", "map"].each do |tq|
+ %w(trackpoints map).each do |tq|
get tq, :bbox => bbox
assert_response :bad_request, "The bbox:#{bbox} was expected to have the latitude mixed up"
assert_equal "The minimum latitude must be less than the maximum latitude, but it wasn't", @response.body, "bbox: #{bbox}"
end
end
end
-
+
# We can't actually get an out of bounds error, as the bbox is sanitised.
- #def test_latlon_outofbounds
+ # def test_latlon_outofbounds
# @badlatlonoutboundsbbox.each do |bbox|
# [ "trackpoints", "map" ].each do |tq|
# get tq, :bbox => bbox
# assert_equal "The latitudes must be between -90 an 90, and longitudes between -180 and 180", @response.body, "bbox: #{bbox}"
# end
# end
- #end
-
- # MySQL and Postgres require that the C based functions are installed for
+ # end
+
+ # MySQL and Postgres require that the C based functions are installed for
# this test to work. More information is available from:
# http://wiki.openstreetmap.org/wiki/Rails#Installing_the_quadtile_functions
# or by looking at the readme in db/README
def test_changes_simple
- Timecop.freeze(Time.parse('2010-04-03 10:55:00'))
+ Timecop.freeze(Time.utc(2010, 4, 3, 10, 55, 0))
get :changes
assert_response :success
- #print @response.body
- # As we have loaded the fixtures, we can assume that there are no
+ # print @response.body
+ # As we have loaded the fixtures, we can assume that there are no
# changes at the time we have frozen at
now = Time.now.getutc
hourago = now - 1.hour
assert_select "osm[version='#{API_VERSION}'][generator='#{GENERATOR}']", :count => 1 do
- assert_select "changes[starttime='#{hourago.xmlschema}'][endtime='#{now.xmlschema}']", :count => 1
+ assert_select "changes[starttime='#{hourago.xmlschema}'][endtime='#{now.xmlschema}']", :count => 1 do
+ assert_select "tile", :count => 0
+ end
+ end
+ Timecop.return
+
+ Timecop.freeze(Time.utc(2007, 1, 1, 0, 30, 0))
+ get :changes
+ assert_response :success
+ # print @response.body
+ # As we have loaded the fixtures, we can assume that there are some
+ # changes at the time we have frozen at
+ now = Time.now.getutc
+ hourago = now - 1.hour
+ assert_select "osm[version='#{API_VERSION}'][generator='#{GENERATOR}']", :count => 1 do
+ assert_select "changes[starttime='#{hourago.xmlschema}'][endtime='#{now.xmlschema}']", :count => 1 do
+ assert_select "tile", :count => 10
+ end
end
Timecop.return
end
-
+
def test_changes_zoom_invalid
- zoom_to_test = %w{ p -1 0 17 one two }
+ zoom_to_test = %w(p -1 0 17 one two)
zoom_to_test.each do |zoom|
get :changes, :zoom => zoom
assert_response :bad_request
assert_equal @response.body, "Requested zoom is invalid, or the supplied start is after the end time, or the start duration is more than 24 hours"
end
end
-
+
def test_changes_zoom_valid
1.upto(16) do |zoom|
get :changes, :zoom => zoom
end
end
end
-
- def test_hours_invalid
- invalid = %w{ -21 335 -1 0 25 26 100 one two three ping pong : }
+
+ def test_changes_hours_invalid
+ invalid = %w(-21 335 -1 0 25 26 100 one two three ping pong :)
invalid.each do |hour|
get :changes, :hours => hour
assert_response :bad_request, "Problem with the hour: #{hour}"
assert_equal @response.body, "Requested zoom is invalid, or the supplied start is after the end time, or the start duration is more than 24 hours", "Problem with the hour: #{hour}."
end
end
-
- def test_hours_valid
+
+ def test_changes_hours_valid
1.upto(24) do |hour|
get :changes, :hours => hour
assert_response :success
end
end
-
+
+ def test_changes_start_end_invalid
+ get :changes, :start => "2010-04-03 10:55:00", :end => "2010-04-03 09:55:00"
+ assert_response :bad_request
+ assert_equal @response.body, "Requested zoom is invalid, or the supplied start is after the end time, or the start duration is more than 24 hours"
+ end
+
+ def test_changes_start_end_valid
+ get :changes, :start => "2010-04-03 09:55:00", :end => "2010-04-03 10:55:00"
+ assert_response :success
+ end
+
def test_capabilities
get :capabilities
assert_response :success
projects / rails.git / blobdiff